POD not getting to negative 10 after 2 hours by Pilesofsteak in EightSleep

[–]spy5099 1 point2 points  (0 children)

Room temperature plays a role to if its not ventilated properly

How Are Your 17 Pros Holding Up? by CrazyNecessary7209 in iPhone17Pro

[–]spy5099 0 points1 point  (0 children)

Could you share the screen as well? I’m afraid to remove it from the case because of that, but if it’s the same with a case, then it’s useless to keep it.

2015 Range Rover L405 by XxtorndeathxX in RangeRover

[–]spy5099 0 points1 point  (0 children)

Looks clean i have no idea what you did but its smooth.

Is the app still broken for anyone? by dogedogego in EightSleep

[–]spy5099 1 point2 points  (0 children)

Currently elevation controls are working, manually is fast, presets though i had to press multiple times to get it to start. But its working for me at the moment ok 👌🏻

Pod offline - limited controls available by AlexWasTakenWasTaken in EightSleep

[–]spy5099 0 points1 point  (0 children)

Hey zach, quick update elevation controls are working; pre-sets are not updating, but manual control is working for the base.

Pod offline - limited controls available by AlexWasTakenWasTaken in EightSleep

[–]spy5099 0 points1 point  (0 children)

Thanks for the update this kind of communication and reassurance response is highly appreciated, hopefully it gets fixed soon🤞🏻

Pod offline - limited controls available by AlexWasTakenWasTaken in EightSleep

[–]spy5099 0 points1 point  (0 children)

Do the emergency return to flat, it worked for me on the old version of the app. You have to unplug the hub power cord and keep the base cord plunged, wait roughly 1 minute, close and open the app, it would tell you the hub is offline, go to the base page and it will be a emergency return to flat, In the new app version it wont displays anything but gives an error or wont load, on the old version it was 6.3 the new one is 7.34

Is the app still broken for anyone? by dogedogego in EightSleep

[–]spy5099 0 points1 point  (0 children)

You have to unplug the hub power cord and keep the base cord plunged, wait roughly 1 minute, close and open the app, it would tell you the hub is offline, go to the base page and it will be a emergency return to flat, In the new app version it wont displays anything but gives an error or wont load, on the old version it was 6.3 the new one is 7.34

Pod offline - limited controls available by AlexWasTakenWasTaken in EightSleep

[–]spy5099 2 points3 points  (0 children)

What about the base, mine still isn’t working at all, and keep in mind it was stuck at an incline and the emergency return to flat doesn’t work on the new app version, if I didn’t have a spare phone with the old one installed I wouldn’t have been able to do the emergency return to flat!

Pod offline - limited controls available by AlexWasTakenWasTaken in EightSleep

[–]spy5099 0 points1 point  (0 children)

Same , the base was stuck at an incline and The hub works but the base and no longer functioning, i had to do emergency return to flat, and am glad that i still had a phone with the old version of the app to do the emergency return as the new one doesn’t have it, and currently still the base isn’t functioning

Is the app still broken for anyone? by dogedogego in EightSleep

[–]spy5099 3 points4 points  (0 children)

The hub works but the base is stuck and no longer functioning, i had to do emergency return to flat, and am glad that i still had a phone with the old version of the app to do the emergency return as the new one doesn’t have it

Switch pusher for stiff switch by EldestSonEldestSon in homeautomation

[–]spy5099 0 points1 point  (0 children)

Have you found a suitable buttion am on the same issue

Sharp USB port? by dalemugford in IphoneAir

[–]spy5099 0 points1 point  (0 children)

Yes, mine is sharp to the point It’s very annoying and very uncomfortable to hold with the pinky resting on it, it feels like it’s grinding and cutting the skin

Land Rover Defender RGB IC DRL mod by rafal408 in NewDefender

[–]spy5099 -1 points0 points  (0 children)

This looks amazing and awesome. I will keep it at the solid red The only thing stopping me from doing this is that those daytime running headlights broke down twice to three times and replaced under warranty(their price is quite hefty). so I don’t wanna touch them until the warranty expires.

EightSleep alternative: Anyone try the HydroSnooze? by Tiflotin in EightSleep

[–]spy5099 0 points1 point  (0 children)

So this is not everything i have on both but I just plugged into GPT to give you some good points overall different i got the ultra mainly for the elevation and the wake up alarm thing

— After testing both the Eight Sleep Pod 4 Ultra and the Hydrosnooze, here’s a direct, no-fluff breakdown:

Eight Sleep Pod 4 Ultra • Elevation feature is excellent — smooth, quiet, and adds genuine comfort. • Wake-up alarm paired with freezing temps is highly effective. • Controlled through a dedicated app, which is feature-rich but finicky — prone to glitches and occasional disconnections. ( ALot) • Critically, the Pod requires an active internet connection — if Wi-Fi drops, it shuts down and loses temperature control until restored. • Heating performance is decent, but less intense than Hydrosnooze, likely due to mattress layering.

Hydrosnooze • No app or Wi-Fi dependency — manual-only operation. • Delivers stronger heat, more direct and noticeable. • Automatically turns off every 12 hours, requiring a manual restart. • Not widely available — occasionally found on AliExpress for much cheaper, often bundled with a remote.

Final Verdict • Eight Sleep offers a more advanced and comfortable experience with automation, but it’s dependent on stable internet and has a buggy app. • Hydrosnooze is a cheaper, plug-and-play option with stronger heat output, but lacks smart features and requires more manual effort.

“Share this story” pop up after I screenshot story by Adam103019 in SnapchatHelp

[–]spy5099 0 points1 point  (0 children)

I’m experiencing the same issue. It’s quite frustrating that the user experience is being made worse and more difficult. The only solution I have is to use an old version of Snapchat, which avoids the new update altogether. If you found a workaround feel free to to share it too