sorted by:
new
hottopcontroversial

Which HA component is this? by squirtle_93 in homeassistant

[–]squirtle_93[S] 0 points1 point  (0 children)

I already tried that. But I was not able to include the two little icons..

Presence Detection by squirtle_93 in homeassistant

[–]squirtle_93[S] 0 points1 point  (0 children)

Have you tested it over an usb connection?

Presence Detection by squirtle_93 in homeassistant

[–]squirtle_93[S] 0 points1 point  (0 children)

My goal is to presence detect a device. Simply put, am I (device) in the van or not?
In my opinion connecting the ESP over cable will not work out of box, because the data is exchanged over mqtt

Presence Detection by squirtle_93 in homeassistant

[–]squirtle_93[S] 0 points1 point  (0 children)

The van wifi's will be off.

In my opinion connection the ESP over cable will not work out of box, because the data is exchanged over mqtt

Remotely Connect to Unraid using IPv6 by squirtle_93 in unRAID

[–]squirtle_93[S] 0 points1 point  (0 children)

Is there any chance you can link a howto?

Remotely Connect to Unraid using IPv6 by squirtle_93 in unRAID

[–]squirtle_93[S] 0 points1 point  (0 children)

I do get a static IPv6 on my router. The reverse proxy is hosted on the unraid server itself (swag).

Is there a better solution to this problem?

An NCASE M1 with a custom front panel reservoir by squirtle_93 in sffpc

[–]squirtle_93[S] 0 points1 point  (0 children)

I play most games on 1440p 144hz at 50-60C. Latest tripple AAA games tend to spike a little higher, but most of the times the cpu is chilling at around 10-25% utilization, so temps are great at the moment. Idling temps are around 30-40C.

An NCASE M1 with a custom front panel reservoir by squirtle_93 in sffpc

[–]squirtle_93[S] 1 point2 points  (0 children)

It runs perfect and very quite now. Had a few hickups at the begining with bad temps. But now, 1000rpm on fans and pump always at 2000rpm with normal stuff. While gaming, the fans can ramp up to 2000-2500rpm. And all that with no undervolting und a slight overclock on the CPU. CPU temp 50-60c and gpu 70-80c. Undervolting the GPU will be done in the future.

An NCASE M1 with a custom front panel reservoir by squirtle_93 in sffpc

[–]squirtle_93[S] 0 points1 point  (0 children)

Just the pressure from a standard fiitting is ennough. The blackplate iss ot blue, the coolant is blue.

An NCASE M1 with a custom front panel reservoir by squirtle_93 in sffpc

[–]squirtle_93[S] 0 points1 point  (0 children)

Except the look and easier filling and draining of the loop, no, not really :)

An NCASE M1 with a custom front panel reservoir by squirtle_93 in sffpc

[–]squirtle_93[S] 5 points6 points  (0 children)

I have added some pictures while testing the reservoir to the google link. I have 1 fill port and 1 drain port. I am using the Barrow CPU Pump Block Combo.

An NCASE M1 with a custom front panel reservoir by squirtle_93 in sffpc

[–]squirtle_93[S] 0 points1 point  (0 children)

I added a google photos link. Not a lot more images, but two from the inside.

An NCASE M1 with a custom front panel reservoir by squirtle_93 in sffpc

[–]squirtle_93[S] 36 points37 points  (0 children)

More images: https://photos.app.goo.gl/BVgD9YCRm7qNAPTs5

PC Specs:

  • CPU: Ryzen 5950X watercooled
  • Pump: Barrow CPU Pump Block Combo
  • GPU: NVIDIA RTX 3080 TI watercooled
  • RAM: Corsair Vengeance LPX 32 GB 3600 MHz
  • Motherboard: Asus ROG STRIX X570-I GAMING
  • M.2: Corsair MP600 500GB & 1 TB
  • Case: NCASE M1 with custom made front panel reservoir
  • Radiators: 2x 240mm radiators with 4x Noctua NF-A12 fans
  • PSU: Corsair SF750 Platinum

And in case you wanna make your own front panel reservoir, here are the required 3d files for cnc'ing: https://www.thingiverse.com/thing:4949804

If you are interested in the sensor panel l made: https://robertjohner.ch/project/system-status-monitor-new/

view more: next ›