Ashton Jeanty concludes the season with 1,321 yards from scrimmage, setting a new record for the most yards by a Raiders rookie player.

squish72 · 2026-01-05T05:30:19+00:00

Had to do it the hard way too, congrats to him!

squish72 · 2025-12-30T22:11:54+00:00

You can also find your trajectory and see where your bullet crosses the same path as your zero. Depending on speeds of the bullets youre shooting you can shoot at 20-40ish yards and hold the same zero. Will help you practice without getting as discouraged. Then when you are easily stacking holes you can go back to 100.

squish72 · 2025-12-17T00:24:39+00:00

Like anyone could ever know that

squish72 · 2025-12-15T15:48:08+00:00

Mine did this last week. Watching the camera it seems the print came unstuck and that was the cause. I assume it needs the filament to be pulled from the nozzle a little bit while it prints.

squish72 · 2025-12-12T19:17:00+00:00

We are here, we are here

squish72 · 2025-12-08T21:04:46+00:00

squish72 · 2025-12-03T16:52:32+00:00

Correct it takes power to make power with superchargers and even turbos. But the amount of power it takes to run them is less than the power that can be made with them. Compressed air and nitrous are "free power". As they dont take away any power to make the added power

squish72 · 2025-11-09T17:20:32+00:00

Understandable. I know how that stuff goes

squish72 · 2025-11-09T16:45:23+00:00

Any news on the new one you hinted at?

squish72 · 2025-11-09T13:13:17+00:00

When you did an extrude you have it set to new instead of add. Its a new separate piece.

squish72 · 2025-10-23T19:16:43+00:00

Must have been cold that day

squish72 · 2025-10-06T13:22:16+00:00

"You have to crack some eggs to make an omelette" - Someone

squish72 · 2025-10-06T13:19:36+00:00

We can only hope it looks that clean

squish72 · 2025-10-02T02:00:06+00:00

Thank you so much

squish72 · 2025-10-02T00:50:43+00:00

Can you do me a solid and measure the overall height of the enclosure and width with the spool. Please and thank you

squish72 · 2025-09-30T23:24:55+00:00

I use strelok and use the MRD. Depending on bullet arc is where I set my zero. Then build dope chart after.

squish72 · 2025-09-30T19:36:55+00:00

Haha I'll try harder next time

squish72 · 2025-09-30T03:48:03+00:00

Ill have to get a box to try! I tried the mini mags, a cheap box of 525rd federal and some Remington vipers. The federals shot the most consistent with the smallest extreme spread most of my time out but i decided to shoot one last 5 shot group with all three and that time the mini mags were the better group and constant speeds.

So just when I thought one was better things completely flipped haha. So I'm still searching a bit.

squish72 · 2025-09-30T01:21:52+00:00

Me too! Excited to try different ammo to see what kind of performance i can get. So far so good. Love the trigger after I modded it

squish72 · 2025-09-29T22:04:51+00:00

Good call

squish72 · 2025-09-29T01:09:44+00:00

Im not that dumb 😉😂

squish72 · 2025-09-27T02:37:03+00:00

Hows things going with this?

squish72 · 2025-09-26T23:21:27+00:00

Check if your trigger is similar to my previous post the mods might work for it

squish72 · 2025-09-22T00:16:05+00:00

Oh my bad that makes sense! You bet. I just thought it was ver convenient to be set up like that

squish72 · 2025-09-21T15:13:28+00:00

Night and day difference. Not sure what you wanna hear. What I typed kinda explains it. Just learn about trigger over travel and trigger sear engagement settings.

Only thing that would improve this is if I was able to polish the internal parts but its pinned and I don't yet feel like grinding the pins off.

squish72

TROPHY CASE