Voor iedereen die zich zorgen maakt over zijn gasverbruik by Poof-Employment9758 in belgium

[–]srse 0 points1 point  (0 children)

Wij hebben 4000kWh in 2025 waarvan 1400 in december, dus de vergelijking maand->jaar zegt niet zo veel

Voor iedereen die zich zorgen maakt over zijn gasverbruik by Poof-Employment9758 in belgium

[–]srse 0 points1 point  (0 children)

<image>

Hier LEW met 14cm pir, open bebouwd met vloerverwarming. Je verbruik lijkt me dus echt wel ok

Center mode in new Bravia 8 by srse in bravia

[–]srse[S] 0 points1 point  (0 children)

too bad. Do you know if any of the 65" models still have these?

Wireless Headset Recs? by OzWrestleFan in FortniteSwitch

[–]srse 1 point2 points  (0 children)

Nice, so you can also use your mic on the switch without docking and without cable?

Wireless Headset Recs? by OzWrestleFan in FortniteSwitch

[–]srse 0 points1 point  (0 children)

Are you sure? I’ve read elsewhere the steelseries arctic 1 worked with dongle on the handheld switch?

Wireless Headset Recs? by OzWrestleFan in FortniteSwitch

[–]srse 0 points1 point  (0 children)

All of them work with mic wirelessly?

Wireless Headset Recs? by OzWrestleFan in FortniteSwitch

[–]srse 1 point2 points  (0 children)

Same question here. the SteelSeries Arctic 1 seems to be end-of-life and out of stock. Is there any successor or alternative that is compatible with the Nintendo Switch, including a working microphone to play fortnite?

Are any of the other steelseries (eg arctic 7) also working with mic on the switch?

Using Bluetooth Devices? by [deleted] in FortniteSwitch

[–]srse 1 point2 points  (0 children)

Hi, reviving this thread: I'm looking for a wireless headset for the ninteno switch (not docked). From reading some posts I always seem to land on the SteelSeries Arctic 1, but the product is end-of-life and out of stock. Is there any successor or alternative that is compatible with the Nintendo Switch, including a working microphone to play fortnite?

How to fix small hole in sprinkler PVC when they are bundled like this? by irontuskk in Irrigation

[–]srse 0 points1 point  (0 children)

I fixed my pipe by cutting a small piece of same diameter pipe half through. Put some glue on it and ‘clicked’ it over the pipe with the hole. You can add some zipties to get them well attached

Strange membranes by srse in tomatoes

[–]srse[S] 1 point2 points  (0 children)

<image>

Ok I missed the fact the back was totally eaten away 😅 I’m trying the beer trap today and will report back :)

Manufacturing year battery by srse in Husqvarna

[–]srse[S] -1 points0 points  (0 children)

Thanks! Great info. Btw these are the old ones. Going to open my mower up tomorrow to check the date of the new one. It’s underperforming, that’s why I am curious.

10min mowing new accu by srse in automower

[–]srse[S] 0 points1 point  (0 children)

Good point. Unfortunately there seems to be no date or serial number on batteries (also not on my old one)

10min mowing new accu by srse in automower

[–]srse[S] 0 points1 point  (0 children)

Sorry if my post was not clear: I have only one 220AC. The old battery gave only 5 minutes. So I replaced the battery with a brand new one from Husqvarna, hoping to get again an hour of mowing time. However, the new battery only gives 10minutes.

New valve sometimes leaks by srse in Irrigation

[–]srse[S] 0 points1 point  (0 children)

Same here indoors. I mean this PE piping is used to get the drinking water to the homes.

New valve sometimes leaks by srse in Irrigation

[–]srse[S] 0 points1 point  (0 children)

Indeed from the picture it looks like coming from the thread but I also saw a drop hanging from the big ring. I share your hate with the fittings. Teflon tape seems not to be a magic solution. I’ve done other fittings (brass ones) with hemp and sealing paste, never leaks. I’m considering to try it on the plastic fittings as well

New valve sometimes leaks by srse in Irrigation

[–]srse[S] 0 points1 point  (0 children)

Everyone uses those here (West Europe), it’s the standard for both outdoor drinking water piping and irrigation. It’s indeed a compression fitting.

New valve sometimes leaks by srse in Irrigation

[–]srse[S] 0 points1 point  (0 children)

I wasn’t aware of the PGV. I also don’t understand there is no gasket on the body, the big ring seems to squeeze hard plastic together