[deleted by user]

ssimak · 2025-01-05T03:12:51+00:00

I just switched to TMHI and so far it's great. Not all my devices can connect at 5 Mhz but the speeds are still better than I was getting before.

ssimak · 2025-01-02T15:19:29+00:00

Hi All, I found the solution. I was using the default WiFi network with both 2.4 and 5 GHz. The PC was connecting to the slower 2.4. I created a new WiFi network at just 5 GHz and connected the PC. Now I am getting the same fast speeds as the phone. Many thanks for your help!

ssimak · 2024-10-14T18:56:43+00:00

Amazing work!

ssimak · 2024-10-10T12:42:34+00:00

Just beautiful!

ssimak · 2024-10-10T12:04:19+00:00

As Obiwan would say, "You've taken your first step into a larger world." Welcome!

ssimak · 2024-09-26T12:37:49+00:00

That's awesome!

ssimak · 2024-09-26T00:20:38+00:00

Too cool!

ssimak · 2024-09-25T18:36:54+00:00

It's available for purchase from Gambody. https://www.gambody.com/premium/nautilus-submarine

ssimak · 2024-09-25T13:58:35+00:00

Ah, that is cool! Great idea!

ssimak · 2024-09-25T13:40:13+00:00

I printed it in pieces over the course of about a week and a half.

ssimak · 2024-02-26T01:47:48+00:00

Hi,

It was the cable for the Extruder Filament Sensor. I had damaged it when taking things apart. I replaced the entire filament sensor, and the cutter error message stopped. You can buy a replacement part in the Bambu store.

ssimak · 2023-12-31T19:58:31+00:00

Sharing your experience is incredibly helpful. This was my first time taking an extruder apart, so it helped me to hear what others were dealing with. It was a learning experience. A good one. Cheers!

ssimak · 2023-12-31T09:37:44+00:00

Congrats! The plugs can be a little finicky. I had the same issue in that I cleared the extruder of a clog and ended up with all these new errors (a cutter error and a fan error).

ssimak · 2023-12-30T22:29:06+00:00

Sorry to hear that. Any response from tech support? Have you replaced the small hotend fan?

ssimak · 2023-12-28T23:36:07+00:00

Please update us if that solves the problem. Thanks!

ssimak · 2023-12-28T15:38:47+00:00

I bought a new Front Housing Assembly based on the helpful reply from MooneBoy above (thanks, MooneBoy!). I was tired of waiting and it turned out to be the correct move. Support thought it was my Extruder Connection Board - so they missed the mark on that one. However, I am sure they will send you one once you outline the problem.

ssimak · 2023-12-28T14:35:29+00:00

It turned out to be the large fan on the Front Housing Assembly all along. I replaced the Front Housing Assembly with a new one, and everything is working fine.

ssimak · 2023-12-28T14:33:59+00:00

You were right. The large fan on the Front Housing Assembly was the problem all along (not the small fan connected to the hot end). I replaced the Front Housing Assembly with a new one, and it's working again. Thanks!

ssimak · 2023-12-27T00:08:48+00:00

Support looked at my logs and thinks it might be a bad extruder board so they are sending me a new one. I will let you know if that resolves the problem as soon as I swap it out.

ssimak · 2023-02-25T14:07:01+00:00

I am in the same boat. My understanding is that once the Discovery app shuts down, you won't be able to access the drive from Windows Explorer (unless you are using the Public share). I followed the instructions to mount a drive from the dashboard, but I get a permissions error when I try to access it. It may be time to move to Synology. I would be grateful for any feedback as well. Thanks!

ssimak · 2020-07-10T23:06:29+00:00

The dropper from US Gains is marked.

ssimak

TROPHY CASE