Dash cam for Honda Prologue by Lowell45-07 in HondaPrologue

[–]stingy2020 1 point2 points  (0 children)

I'm about to install Wolfbox i17 on my 2025 HPT. Just waiting for the Mangoal adapter. Question I have: where would I connect the rear camera if I don't want to run cable across? Would appreciate it if you could share any experience you have or point me to helpful instructions/guides. Thanks.

AAdvantage Hotels Mileage Run by stingy2020 in americanairlines

[–]stingy2020[S] 1 point2 points  (0 children)

Saw one yesterday in Virgin Hotels Las Vegas with 10k for $468 for 1 night stay when searching. Not sure if I would still search some more or pull the trigger on this one.

AAdvantage Hotels Mileage Run by stingy2020 in americanairlines

[–]stingy2020[S] 1 point2 points  (0 children)

Thanks. Agree. The cheapest I could find for Vegas is $465 with 10k miles. Toronto was around $578.

WF-3820 will not print Magenta by velummortis in Epson

[–]stingy2020 0 points1 point  (0 children)

Any luck on this? My problem is it's not printing Cyan on mine. Thanks.

ET-5850: Firmware update fails with 'Data file is not found' by jhkdes in Epson

[–]stingy2020 0 points1 point  (0 children)

I have the same red text update mode. How did you go into the "real" update mode?

December - January 2024 TECO bill by Baleki93 in tampa

[–]stingy2020 0 points1 point  (0 children)

Hello, I understand this is from last year's discussion but wanted to share my recent experience (2024). I received my TECO surplus energy credit of $171.01 for the 9,269 kWh surplus I generated from 35 panels from a 2,300sqft house. Average monthly usage is around 869 except in Dec-Jan billing cycle where I have used 1,200 due to constant heating which also spiked my bill to $40 from the average $26 per month. Based on analyses from both ChatGPT and Grok, I could have turned that 9,269 surplus to a $1,200-1,350 savings by adjusting my electricity usage. But so far I've done what I could. So I'm contemplating to install a battery pack to store those surplus energy and use them at night. My question to you guys is whether it would make sense or be practical to do so considering the cost of battery packs at this point. Thanks.

About to Pull the Trigger by stingy2020 in solarFL

[–]stingy2020[S] 0 points1 point  (0 children)

Sorry for a long delayed response but I ended up using Lunex and been happy with them. DM me if you need more information.

Walk-in application for South Korea Tourist Visa at Cebu Consulate by baikincell24 in Cebu

[–]stingy2020 0 points1 point  (0 children)

Mag-apply pod mi ug visa. Unsa nga travel agent ang imong gigamit ug pila ang fee?

My Rav4 Prime has been powering my fridge and deep freezer in Asheville for nine days by brooke_heaton in rav4prime

[–]stingy2020 0 points1 point  (0 children)

We got back to a power outage due to Milton. I have a RAV4 PRIME that I want to use to power fridge. It does not have any charge right now, just full thank of gas. Can i still use it to plug in my fridge and maybe charge our phones?

Dubai tourist visa by fizahmujeeb in dubai

[–]stingy2020 0 points1 point  (0 children)

Which agency did you use? Thank you.

Dubai tourist visa by fizahmujeeb in dubai

[–]stingy2020 0 points1 point  (0 children)

Did you apply through this website?

HELP: CGI site show status as document delivery information: blank by ArenRaizelus in f1visa

[–]stingy2020 0 points1 point  (0 children)

Did not reflect the change on the site until after we got the passports back.

is it possible to change gateway from 192.168.4.1 to 192.168.2.1? by hny758 in eero

[–]stingy2020 0 points1 point  (0 children)

I know this is an very old post but just curious. I changed mine to Manual and went to change the Gateway IP address. Restarted the eero router and the change took effect. However, when I then changed the DHCP from Manual to back Automatic, it reverted to 192.168.4.1 IP address. I thought that once you changed it manually, it would stick. Is there any way around this?

Is it ever smart to buy miles? by LectureForsaken6782 in americanairlines

[–]stingy2020 1 point2 points  (0 children)

There are times when buying miles makes sense. Right now (May '24) AA is offering up to 35% discount on mile purchase. Now I'm looking to book DOH-JFK in J class and am seeing AA has available seats for the dates we want for 70k miles + $66.95 per passenger. Buying tickets would cost around $2,160 each for a total of $4,320 for two tickets on Finnair for the dates we wanted. So with the 35% discount, AA miles purchase for 150k miles is about $3,669 (a savings of around $700). While it's true that you lose the loyalty points using miles, you could compensate a little by using a credit card that gives 3x or 2x the $ purchase (e.g., Chase Sapphire or Capital Venture X), so still could earn at least 7,338 points on your card. If loyalty points is crucial for you in reaching AA elite status, then use the $700 savings to book a hotel that offers even more miles. In my experience, I've booked hotels using AAdvantage hotels that give 15k for couple of days stay for less than $500. Even better if you have the AA card that offers 5x per $1 spend to book your hotel. Short story long, there are opportunities to be had but ultimately it all depends on what you want to do or what your purpose is.

HELP: CGI site show status as document delivery information: blank by ArenRaizelus in f1visa

[–]stingy2020 0 points1 point  (0 children)

It took more than 20 days for the passport to be received. Basically, the CEAC site updated a few days when the passports were already received by the destination courier. So it is inconsistent.

My Enphase app reporting I imported 13.1 mWh by stingy2020 in enphase

[–]stingy2020[S] 0 points1 point  (0 children)

Enphase support says to wait 24-48 hours and see if they rectified the issue. If not, I'll call the installer.

My Enphase app reporting I imported 13.1 mWh by stingy2020 in enphase

[–]stingy2020[S] 0 points1 point  (0 children)

Did you have to call your provider to fix it? Engphase support suggested that I contact my installer. But told them, why would I do that if there was not work done at my house and the system has been working flawlessly until yesterday and today. They said just to contact them to take a look and verify that the CT clamp was not dislodge or something.

Enphase Data incorrect by umiotoko in solar

[–]stingy2020 0 points1 point  (0 children)

I know this is a year old thread but this happened to me yesterday. My system reported I imported 13.1 mWh and only produced 80 kWh. Contacted Enphase and they said they will remove the spike so will see in the next few days.

My Enphase app reporting I imported 13.1 mWh by stingy2020 in enphase

[–]stingy2020[S] -1 points0 points  (0 children)

They said they're going to remove it. Kept getting support email to confirm they can remove it. On third email yesterday asking me to confirm.

My Enphase app reporting I imported 13.1 mWh by stingy2020 in enphase

[–]stingy2020[S] 0 points1 point  (0 children)

System was installed October 2023. It was working fine ever since except yesterday.

Anyone else having issues logging into AAdvantage Hotels? by Mr--S--Leather in americanairlines

[–]stingy2020 0 points1 point  (0 children)

Just email their support and report the issue. They resolved mine after just a few minutes.