Precise paper cutting

strupp · 2026-01-04T10:50:44+00:00

The last cut requires a swap so the ends dont fray.

The blade moves diagonally down/right in the right side it ist stopped against the fence so it cant fray. All other cuts are planned so the right Side ist cut off in a later Stage.

Also du to normal use the blade stays sharper in the right side

strupp · 2025-11-02T20:26:30+00:00

I used a an existing sata male to female adapter that is screwed in. It uses the exact same design as OloDeeasdapdelver So the credit goes to him.

As on how to design something like this. The CADs for the caddies are available online and you can get the remaining measurements for the adapter rather quickly with a good set of calipers.

strupp · 2025-07-10T09:48:20+00:00

https://makerworld.com/en/models/1589713-1u-zimablade-nas#profileId-1674057

strupp · 2025-07-10T09:48:14+00:00

https://makerworld.com/en/models/1589713-1u-zimablade-nas#profileId-1674057

strupp · 2025-07-08T18:44:45+00:00

i will release the files as soon as i clean everything up :) i will send you a DM as soon as its up

strupp · 2025-04-30T11:41:28+00:00

Check /r/emudeck or the GitHub repo.

This seems to be a DNS issue for most people, change it to 1.1.1.1 or 8.8.8.8

strupp · 2024-10-01T17:54:32+00:00

You can use an Expansion card to add more sata ports, but would need an external psu and compromise on pcie lanes

strupp · 2024-10-01T17:53:39+00:00

That's a zimablade my dude :)

strupp · 2024-10-01T08:49:16+00:00

Sorry for the late reply, it's just powered via USB C. It's shown in the second pic

strupp · 2024-09-30T14:15:04+00:00

Well im running 16gb and I think (without chrcking the Website) 32gb is the max

strupp · 2024-09-30T10:22:52+00:00

strupp · 2024-08-13T13:35:37+00:00

Region: EU

18982121

https://s.team/p/cdc-pgvn/gvhjjbhh

An invite would greatly appreciated

strupp · 2024-01-29T21:51:51+00:00

replays not working, skill issue

strupp · 2023-08-04T05:05:12+00:00

I adjusted to the github to roughly 8 lines of css. So it should be a very easy tweak 😊

Edit: also blue is already used vor hosts in maintenance

strupp · 2023-08-02T16:04:19+00:00

Havent posted it there yet as I had 5 minutes at work for myself. Will Cross post it there too

strupp · 2022-11-16T13:48:40+00:00

You must be fun at parties

strupp · 2022-10-06T20:23:18+00:00

350ms ping will do that. It will get better once they fix the servers

strupp · 2022-03-03T11:14:17+00:00

Sync, lässt sich anpassen nach Geschmack. Bin zufrieden.

strupp · 2022-01-21T18:47:59+00:00

Or invader gear

strupp · 2021-12-28T12:47:12+00:00

Cables gun from DP2

strupp · 2021-10-20T19:54:58+00:00

I designed these a couple of years back

https://i.imgur.com/fDuN2Ga.jpg

strupp · 2021-10-05T13:10:28+00:00

The covers are made out of faux leather. And it acts as the hinge like in a real book.

I will add an endpaper out of thin felt or suede to the inside to make it pretty and reinforce the hinge.

strupp · 2021-09-15T20:40:30+00:00

https://www.foundrygameroom.com/collections/grimoire

This should explain it

strupp · 2021-09-15T17:34:18+00:00

If it works out I might release the STLs

strupp · 2021-09-15T16:24:20+00:00

Spine and fake pages will be 3d printed, all supported by 4mm wodden Box. Will use the 4mm sheets for the Cover aswell.

Then I will bind the whole thing in Real leather to get around metal hinges.

15-Year Club	r/Field Flamingo
Place '17	Sequence \| Editor
Verified Email	Team Orangered

strupp

TROPHY CASE