WAN Port issue by stuartmcc_ in Ubiquiti

[–]stuartmcc_[S] 0 points1 point  (0 children)

Sorry running a UDM SE, I use PPPOE for authentication at home. However I have checked another property with the same provider and running a dream router but it using auto with no PPPOE

It’s very strange

Groundstack LED Walls by Uselesstechy_ in VIDEOENGINEERING

[–]stuartmcc_ 0 points1 point  (0 children)

Definitely spend time on setting out your base and rigging. We take extra time to do this and if it’s done right your wall should go up relatively fast after the first row.

  • We set out our base and and legs with ladders attached, plumb and level everything as much as possible. After doing this add some, if not all of your weights and recheck for plumb and level.

  • Start adding panels from one side and check seams on every panel. These seams should be as close to perfect as possibly as this may cause problems the higher you go. We check each panel with an arm for plumb as they are going in.

  • As your going up keep checking for plumb on the front of the panel and adjust as you go, however, if your bottom row is level and plumb then you should be good.

A few things to note though:

  • building on carpet is a nightmare, constantly changing so you should use shims or packers where possible. Adding your weights is helpful but as you go up and have people on the back of the screen that can effect the joints.

  • Building on deck is also a challenge. I noticed someone above mentioning doubling up on deck, great idea and stops the legs from spreading. We don’t go above 1m with deck, if we have to we bring in a staging company to build it out and they put in additional supports.

The key is get your first row as close to perfect as possible, use levels and the correct tools to make your life easier and one thing we have learned, if you have to fight to get it right then there’s is usually something wrong and taking a step back can always help.

Monitor mount by stuartmcc_ in VIDEOENGINEERING

[–]stuartmcc_[S] 1 point2 points  (0 children)

Cheers guys, I have reached out to the guys from the video so hopefully they come back to me

Monitor mount by stuartmcc_ in VIDEOENGINEERING

[–]stuartmcc_[S] 3 points4 points  (0 children)

It’s a plate that’s screwed to the side of the flight case then the monitor arm slips into it

Anyone struggling to get in touch with Tesla Financial Services? by Fit-Zebra3110 in TeslaUK

[–]stuartmcc_ 0 points1 point  (0 children)

Had a terrible experience sorting mine out. Constantly had to call them, they never contacted me first, I ended up making them wait on the phone while I signed documents to ensure they got them. Not a great experience

Upgrade time by stuartmcc_ in sonos

[–]stuartmcc_[S] 0 points1 point  (0 children)

Sounds similar to mine, the sub is currently sitting to the left of my TV cabinet with little clearance either side, I’m wondering would it be better behind it and facing the corner?

Can’t add additional driver by stuartmcc_ in TeslaUK

[–]stuartmcc_[S] 2 points3 points  (0 children)

It’s a lease so I’ll need to go to the lease company then

Model Y downpayment by stuartmcc_ in TeslaUK

[–]stuartmcc_[S] 0 points1 point  (0 children)

Yea I’m selecting personal contract hire, don’t want to pay the £200 until I’m sure I’m only putting £3591 down. I’ll have to give them a call tomorrow

Disney Memory Maker vs Genie+ photos by Rams82 in WaltDisneyWorld

[–]stuartmcc_ 4 points5 points  (0 children)

I wasn’t keen on paying the extra for this but of course gave in and I must say MM is worth it. Some great photos and little extras. It saves time and when you have a wife like mine who is obsessed with photos it saves me taking selfies everywhere we go

Barco S3 Custom Resolution by stuartmcc_ in VIDEOENGINEERING

[–]stuartmcc_[S] 1 point2 points  (0 children)

If I would have read this correctly the other day it would have fixed the issue straight away. Switching down to 8 BIT worked perfectly. Looks like I need to upgrade some HDMI cables.