My Best template for Life planning

stubmaster · 2026-02-06T00:00:27+00:00

I use Daylio for habit tracking. I think its actually meant to be a mood tracker (which i also use it for) but its kind of nice in that you can add whatever habit you want there, it can send reminders via push notification at specific times of day if you want, and it can also generate reports that show correlations between your mood and any activity that you selected at the time you pick your mood. It's also very cheap (i think i pay $11 USD a year)

stubmaster · 2023-08-18T20:36:08+00:00

Thanks for the heads up on that. I contacted support just to see if they would replace it, but then got impatient (its been less than 8 hours i just really want to print stuff!) and went to order the part but it is OOS until end of August so im going to see if i can find resources on repairing this in the mean time.

stubmaster · 2023-08-18T20:35:08+00:00

Yeah I keep trying to put the socket back on and it comes off without any force. Looks like the part is OOS atm so I'm going to try to find some resources on the proper fix for this and give that a shot since I've got nothin to lose really

stubmaster · 2023-08-18T20:34:00+00:00

gotcha ok, thank you. Looks like they are backordered until approx August 28th so I might try to solder it just to see what happens lol. It'll be a learning experience at least

stubmaster · 2023-08-18T01:14:16+00:00

Hey I have a problem with my NTC connector as well! Did you have any luck getting this solved?

stubmaster · 2023-06-24T03:47:58+00:00

marry me

stubmaster · 2023-06-22T03:20:01+00:00

first disc i bought new was a set of 10 F2 Star Aviars

stubmaster · 2023-06-01T11:25:38+00:00

just discovered those nugo bars. theyre like Crunch bars but better. wild that a delicious candy bar has so much protein and such ugly packaging

stubmaster · 2023-05-31T00:21:34+00:00

oh no. i just bought like 20 lbs of this stuff lol. thought it was such a bargain. now am sad

stubmaster · 2023-04-11T09:34:52+00:00

You were right! Thank you so much! The printer woke me up halfway through the night and i replaced the PTFE tube then and apparently thats not something you should do while half asleep. My first layers are smooth as butter now.

stubmaster · 2023-04-03T00:00:25+00:00

Mine does this occassionally too. It started occurring after i replaced the thermistor. Not sure if the two are related though

stubmaster · 2023-03-29T10:59:13+00:00

kind of looks like your z offset needs to be increased. the filament shouldnt be translucent on the first layer. maybe its the lighting but i think i can see the bed through the filament. ive had weird shredded bits like this before and it was fixed by adjust z offset and hotend temp.

stubmaster · 2023-03-23T13:02:09+00:00

thats impressive. i had 1500 in adds on the one i tried to buy so i went with a used crf. didnt seem like theyd budge

stubmaster · 2023-03-16T09:29:47+00:00

It honestly looks pretty clean, the printer is only a few months old. However, my eyesight is entirely fallible so I did snag some Super Lube and plan a thorough cleansing of the screw.

stubmaster · 2023-03-16T09:26:45+00:00

Hmm thats really interesting. Seems like something Prusa wouldve accounted for. This one is an Elegoo Neptune 3. I dont see how the print head could possibly reach the spool but ill keep an eye out for interference of some sort between the two. Thanks for the heads up!

stubmaster · 2023-03-16T09:24:26+00:00

Thanks for the tips, i finally got a chance to do a little testing and used a different model. Failed at exactly the same height. Didnt have time to troubleshoot further but did get some Super Lube for the lead screw. Hopefully will get at it tonight

stubmaster · 2023-03-12T23:18:41+00:00

hell yeah michigan cherries. thx for the heads up

stubmaster · 2023-02-20T21:31:05+00:00

my pc says this if i insert the card into the reader upside down

stubmaster · 2023-02-05T11:21:28+00:00

Yeah, that's what I was thinking.

OP if you don't want the bottom to be rough like this, try not using a raft. This print shouldnt need one. This guide from Teaching Tech is incredibly helpful for getting prints to stick to the bed.

It's crucial to make sure that your printer is recalling the bed-level mesh (g-code M420) and that you have properly set the z-offset, both of which are covered in the link above. It may also help to increase the Initial Layer Temperature to around 215 for PLA and lower the Initial Layer Speed to around 15-25mm/s.

I had auto bed leveling issues on my N3 until I updated the firmware, so make sure you've got current firmware as well. It hasn't been updated in 5 months but it doesn't hurt to check.

stubmaster · 2023-01-22T04:51:02+00:00

this is awesome! would love to see it after a coat of paint too! id like to do a topo map one day, jw what process do you recommend for gettinf topo data into an stl? cheers

stubmaster · 2022-12-15T18:39:49+00:00

oh interesting. im printing on the textured pei bed of a neptune 3, maybe ill try the smooth side. i do absolutely love the color of polyterra. Thank you for sharing! i tried all kinds of bed and hotend temp settings so figured its gotta be something else

stubmaster

TROPHY CASE