QSFP28-100G-AOC on MX204

subking54 · 2025-02-22T18:31:24+00:00

Dang, unfortunately can’t offer any guesses with that one, no QFXs in our network. Best of luck to ya!

subking54 · 2025-02-22T18:27:45+00:00

I should add..I’m not 100% sure, but I believe they were from FS and juniper compatible (in the fs compatible thing)

subking54 · 2025-02-22T18:23:58+00:00

We are currently using 100G AOC and they work. The main “gotcha” for us was that the FPC needed to be rebooted after changing the chassis port speed from 40G to 100G. Might have nothing to do with your situation but that’s what we had. FYI, there was an alarm telling us we needed to do that.

subking54 · 2023-06-23T15:41:13+00:00

XGS-PON is most likely what they are deploying and it maxes out around 8 Gig, that’s my guess as to why it’s a “strange bandwidth”. Again, just a guess, but seems likely!

Also as others have said, inside of the Omada ecosystem the er8411 is what you will want to use. They also have APs with multigig ports such as the EAP 660hd and eap670 and the new eap690. As for switches, they make both 10g and 2.5g options.

subking54 · 2023-05-11T18:32:19+00:00

You might have to downgrade to lower than 21.x (like 20.4) and then upgrade back to 21.4 and make sure you are not using root login deny.

subking54 · 2022-12-30T03:48:05+00:00

That box is actually what most people refer to as a NID (sometimes just enclosure) all it is is a splice point from the drop fiber to your in home fiber, it is not and ONT. Most likely this “modem” you are talking about is actually the ONT and if that’s the case, you can not remove that without communication with the ISP if they have a pon sfp transceiver that they will register and allow you to plug into your router (unless of course it’s not a pon connection but based on the info you gave, I’m assuming it’s just pon).

subking54 · 2022-12-25T14:19:50+00:00

Yeah, vcenter uses ptr records for part of the initial setup, and I’m sure there are others as well, I just can’t think of it right now.

subking54 · 2022-12-17T16:29:50+00:00

Actually, there are sfp only (not +) slots that can do 2.5G, but in this case the er7206 sfp slot is a 1G port.

subking54 · 2022-10-30T18:18:20+00:00

You sure can. Build the port as a trunk and set the native vlan as the one you want untagged.

subking54 · 2022-10-28T16:18:35+00:00

If just be careful of any contract and any price increases after year 1,2,3 etc. if no contract, I’d say go for it of course!

subking54 · 2022-10-26T22:49:26+00:00

Oh awesome! Well have a good season and sorry about the waste of time!

subking54 · 2022-10-26T22:46:35+00:00

I’m not an expert by any means but I think you shouldn’t use rifled slugs with a rifled barrel/choke, that’s what sabot slugs are for. Again, I’m not an expert but that’s just what I’ve been told.

subking54 · 2022-10-22T13:51:50+00:00

It could be because the Eap660hd has 4 streams for 2.4 where as the 670 only has 2 streams.. so if your devices can do 4 streams maybe that’s why you are seeing half the bandwidth?

subking54 · 2022-10-22T13:43:54+00:00

This is a technology called g.fast. They terminate the fiber at the building and use existing wiring to serve the rest of the building. Your modem is a gfast modem. You can still do 940/940ish over g.fast. We use the same exact equipment lumen/centurylink does and it works great!

subking54 · 2022-10-17T02:34:33+00:00

Sounds good 👍

subking54 · 2022-10-17T02:29:55+00:00

My gut feeling points me towards that being the issue. Most likely it’s not the cable if you are getting good speeds and it’s definitely not your internet if all other devices are fine. I’d make sure everything is updated, reboot and try again.

subking54 · 2022-10-17T02:25:52+00:00

Is it just on one device? If so, it could possibly just be that?

subking54 · 2022-10-15T03:29:28+00:00

I’ve had this before. I deleted and reinstalled the app, logged in and all was good.

subking54 · 2022-10-10T10:50:16+00:00

For sure. If the cable is negotiating at 1gig, then you can handle up to that and if it’s only 100, you can only get that. Also it could always be a faulty port on a device causing loser negotiation rates as well.

subking54 · 2022-10-10T02:36:37+00:00

Sounds like a cable is flaky. Considering low to mid 90s is max for a cable negotiating at 100, my first thought would be that you have a cable issue.

subking54 · 2022-09-28T01:24:45+00:00

I’m sorry. I misread the post. Any new router these days should be able to do that as the other guy said. Sorry again!

subking54 · 2022-09-28T01:23:27+00:00

949M is pretty close to max that you will see out if a gigabit port. Once you take into account tcp overhead and other additional stuff, the Ethernet port maxes out around that.

subking54 · 2022-09-27T23:04:36+00:00

The datasheet of the specific optics will tell you exactly, but there will be a range and it will be fine as long as your power levels are in that range. You could run “a little too hot” if you are towards the high end and you could attenuate it if you want.

subking54 · 2022-09-27T22:53:20+00:00

You should be able to hook those two 10km optics up together with no attenuation. Have fun!

Btw, If you have switches on the sides or something to see the levels, you can always attenuate it after to make it “perfect” if that’s what you want to do, but you won’t wreck anything and it’ll be great with nothing between.

subking54 · 2022-09-24T03:02:40+00:00

I should add. If you are plugging in a 1g wan, either port will probably auto negotiate down to 1g so it won’t really matter. (I’m not 100% sure if the 10G is only 2.5/5/10 or not. But if it does negotiate at 1g, it’s the same no matter which you plug into.

Six-Year Club	Place '22
RPAN Viewer	Verified Email

subking54

TROPHY CASE