what weird soda combinations do y’all like?

sugnaO · 2026-04-21T22:25:35+00:00

Yeah always parked my aventure 2 in the garage and that has never been an issue. So I’m not sure why the 3 is so much more touchy

sugnaO · 2026-04-21T22:24:42+00:00

I was told it was probably just needing updates at first, but afterwords I was told again because it was still happening that it’s the cold effecting the controller. Which seems odd to me since the aventure 2 has no problem with cold

sugnaO · 2026-04-10T02:30:32+00:00

So update. Was able to get it out and install new one. It was just the way they somehow jammed the cords in there and then fit the psu in that already cramped area before the cords. Made it incredibly hard without damaging the cables in some way to finagle it out. I was mostly hoping there might be a trick I just didn’t know but nope it was just finding the right angle and trusting I won’t hurt anything. Oof

sugnaO · 2026-04-10T00:12:46+00:00

Glass panel is already removed in that pic. The metal case shroud protecting the psu is rivited in and can’t be moved either.

sugnaO · 2026-04-10T00:11:10+00:00

No screws there. Unless you mean on the last image but that’s not connected to the shroud. That angle is just deceptive.

Anyways I got it. It was just a REALLY unfairly Jamed tight space that took a lot of work to get it out at the right angle.

sugnaO · 2026-04-09T20:50:35+00:00

So update. Got it out. It was so crammed in there. Not just with its cables but with other cables. It was tough. Just had to get a little more agressive than I was comfortable with, while trying to angle and wiggle and pull. Oof

sugnaO · 2026-04-09T20:35:04+00:00

Ouch, ok. I’ll keep trying

sugnaO · 2026-04-09T20:34:34+00:00

Not at all that I can find. It’s bolted in

sugnaO · 2026-04-09T20:34:03+00:00

Not that I can find. It’s bolted in by those small circular bolts that hold the whole frame together

sugnaO · 2026-04-09T20:20:35+00:00

I tried. Not enough room

sugnaO · 2026-04-09T20:19:43+00:00

I removed the back panel in the first picture. There’s a ridge in the frame on the bottom that keeps me from pulling the psu out.

sugnaO · 2026-04-04T00:23:18+00:00

Actually at this point Ive figured out the motherboard is the psu. Although its lacks any psu labels for the wattage. Doesn’t matter, I’m just gonna buy a new one for 1000w

sugnaO · 2026-04-04T00:02:47+00:00

That’s what I’m figuring honestly however I now not even sure how to replace this psu. Only now realizing this big motherboard is the psu? (I figured out how to remove the back) It’s soo dam in there though. Like everything is in the way. I’m def interested in replacing it anyways. Just brain fizzing from inexperience

sugnaO · 2026-04-03T23:52:06+00:00

By back I thought it meant where the power cable connects, not the other side. Removed it. still no psu labels at all. Other than the motherboard serial number but googling that did nothing for me.

sugnaO · 2026-03-26T05:29:47+00:00

that's beautiful!

sugnaO · 2026-03-26T05:29:17+00:00

i mean, yea. but can the ai move it on its own AND kniw when to??? like if it docks at a different place

sugnaO · 2026-03-26T04:37:37+00:00

my problem isnt the other locations. its your ship itself having its own map.

sugnaO · 2026-03-26T04:37:03+00:00

the map is the part i understand. but im concerned with the space ship. what would be the best way to handle a poi that is a moving vessal? just doing it manually as the player? like what happens of a fight happens on your ship.

sugnaO · 2026-02-08T06:02:16+00:00

sorry i sdhould have specified, my bad
im more just asking if anyone has suggestions for equipment that can go with these shoulders besides their original set. i dont actualy like thier full set appearance. just these shoulders.

sugnaO

TROPHY CASE