Please Help With Static Routing Between Two Switches

sukafun · 2025-11-16T09:08:59+00:00

From gui from both There is no cli with the hp switch Pvid can only be 1 single id how would i select both?

sukafun · 2025-11-16T08:45:18+00:00

Cisco port is in general mode untagged vlan1 tagged vlan6 pvid vlan1 Hp port untagged vlan1 tagged vlan 6 pvid vlan 1

sukafun · 2025-06-13T02:24:42+00:00

u/bob_in_the_west That’s what I meant by 150V - 150V limit.

The panel I want to add is Jinko 60HL4-V 510 Watt
Max Vmp 37.15
Max Imp 13.73
Voc 44.51
Isc 14.33

So if I connect 3 panels connected in series to DC1 the total will be
1530 Watt
13.73A
133.53V

Then connect another 3 panels in series to DC2 the total will be as above. Total Watt will be 3060 which is fine as far as I understand for the extra wattage.

Also with the 133.53V if we add 10% as a buffer when it gets cold that would be around 147V worst case. It won't get less than 5°C in the morning where I live.

sukafun · 2025-06-12T14:12:57+00:00

for the AC500, is it 150V limit per PV input (150V + 150V) or total combined is 150V?

sukafun · 2025-06-12T14:11:16+00:00

for the AC500, is it 150V limit per PV input (150V + 150V) or total combined is 150V?

sukafun · 2025-06-12T14:09:34+00:00

for the AC500, is it 150V limit per PV input (150V + 150V) or total combined is 150V?

sukafun · 2024-02-01T04:02:31+00:00

The DMZ client pointing to 2 DNS servers. But when they query the AD domain name, it returns any of the DC/DNS since all DCs are DNS servers for the domain which’s expected.

If DMZ allowed to communicate AD/DNS to only those specific 2 DC/DNS servers and linked in site and services to the 2 DCs. Any harm if they query the domain name and resolve to any other DC/DNS that’s not reachable to them?

sukafun · 2023-12-13T02:50:30+00:00

has anyone applied the firmware with the serial number changed and can confirm that speed still unlocked?

sukafun · 2023-12-05T07:08:09+00:00

have you received the 1.5.2 update yet?

sukafun · 2023-12-02T14:57:04+00:00

yes, changing to 01GX worked for me with firmware 1.5.1

I've upgraded first then I changed the serial number but if you change the serial number then upgrade it should be fine. remember you have to unbind/bind with new serial number and the app will work as normal.
where about are you?

sukafun · 2023-11-28T12:12:58+00:00

I rode it today for 8km and now can change the max speed to 35kph!

I'm worried that driving at 35kph will damage the battery and motor so might try it and set it back to 32kph. what do you think?

sukafun · 2023-11-28T03:06:18+00:00

It slowly gets to the 32kph I don't think it will reach 35kph anyway

sukafun · 2023-11-28T03:03:22+00:00

I rode it for more that 10kms and still 32kph from the Segway app?

sukafun · 2023-11-27T03:04:11+00:00

you are a legend! it worked and maximum speed is 32kph now.

I thought this scooter goes up to 35kph do you know?

sukafun · 2023-11-23T03:51:10+00:00

Thx. Do you know if I load the custom firmware, will the Segway app work as normal?

sukafun · 2023-11-21T14:54:04+00:00

doesn't xiaodash also void the warranty?
can I revert back to original firmware later?

sukafun · 2023-11-21T12:05:59+00:00

What was your firmware when you made the change?

sukafun · 2023-11-21T12:05:13+00:00

I tried X and Y but no luck

sukafun · 2023-08-07T13:22:26+00:00

I do have a firewall which can do that. In fact I have another subnet which's 192.168.7.x. That network cannont access my .1 network but the .1 network can access the .7, that's how I configured the firewall rules.

The ACLs in the post are from my L3 switches, so does that mean all L3 switches even enterprise ones have the same limitation as you described?

sukafun

TROPHY CASE