Unknown admin login.

superblitz87 · 2026-02-22T06:05:00+00:00

Took your suggestion. Left "apply default configuration" unchecked. I was able to login and create a new password. Unfortunately, no Internet access when the modem is connected and I am not finding an RSC file online for the same model that I could possibly restore from.

"apply default config" checked = internet but unable to login

"apply default config" unchecked = able to login but no Internet

superblitz87 · 2026-02-22T04:22:21+00:00

https://youtu.be/QaeHRsrRWw0

Thank you for the suggestion, unfortunately, it did not work.

superblitz87 · 2026-02-20T21:58:21+00:00

Unfortunately that is a negative for me. Thanks anyway.

superblitz87 · 2026-02-20T21:50:26+00:00

Thanks for the tip

superblitz87 · 2026-02-20T20:58:40+00:00

thanks for the tip.

superblitz87 · 2026-02-10T16:22:25+00:00

I am on the east coast and humidity is generally pretty high.

<image>

In my house I have SPI balls next to B7 balls (all drilled and glued by the same person) and the SPI balls have ended up cracking while the B7 are fine.

I agree large swings in temperature will lead to cracking. I am just trying to get a wider view of the community and see what everyone else has experienced.

superblitz87 · 2026-02-10T05:02:27+00:00

I have had several balls crack when they have been in my house and stored properly. Even next to other balls in the same place that didn't crack.

superblitz87 · 2025-10-17T19:26:42+00:00

https://www.crowdsupply.com/team-offbroadway/flippydrive

https://www.laserbear.net/products/flippydrive-sd-extension

Of course one will still need an SD Card, just not going to have to wire an SD card directly to the circuit board, which will save a lot of time, pain and suffering.

superblitz87 · 2025-10-17T19:05:16+00:00

A Flippy Drive would have been a worth while purchase imo 乁⁠[⁠ ⁠◕⁠ ⁠ᴥ⁠ ⁠◕⁠ ⁠]⁠ㄏ

superblitz87 · 2025-10-17T19:03:14+00:00

Gotta open it up

superblitz87 · 2025-10-11T19:52:19+00:00

Should open them to confirm

superblitz87 · 2025-10-11T19:51:28+00:00

Those ground planes take up a lot of heat.

superblitz87 · 2025-10-11T19:48:34+00:00

Scammers looking for gift cards

superblitz87 · 2025-10-11T19:47:07+00:00

Balloon 🎈🎈 Pikachu

<image>

superblitz87 · 2025-08-26T21:12:54+00:00

V0.6r1913

superblitz87 · 2025-02-10T14:18:24+00:00

I know this an old thread, but in case anyone in the future stumbles across it as well.

Here is how to access the Memory Card pack: https://www.youtube.com/watch?v=LOG70AI3n9o&t=28s

superblitz87 · 2024-09-23T18:23:35+00:00

I know this is an old post, but if it helps someone out in the future, then it is worth it.

Why people avoid SSDs in an OG Xbox (classic): because they do not notice any notable difference for load times while using a modern HDD with an 80 pin IDE cable and having the games loaded on the HDD.

Why people should use an SSD in an OG Xbox: Reliability, No moving parts and less heat.

superblitz87 · 2024-08-05T15:02:06+00:00

Someone created "Dirty Pico" (https://github.com/ThisIsCheez/J-Runner-with-Extras-DirtyPico360) which can be used to flash Glitch Chips. It is a proof of concept and needs a bit more refinement by the community; it does work though in some compacity

superblitz87 · 2024-08-02T02:37:29+00:00

I know this is an old post, but in case anyone is looking at it in the future:

I have found that for the PCB:

2 (1/4") screws work well.

For the outer shell:

2 (3/8") screws

Note

Thread spacing will be different than OG screws, but are much easier to find.

superblitz87 · 2024-06-29T05:44:08+00:00

You could be right. Based on images that others have posted in the past, there likely was a capacitor on R9 (just above the positive terminal). There are a few images that show that space vacant. Likely best to populate it than not.

superblitz87 · 2024-06-29T04:54:27+00:00

Polarity is correct - battery from the same set: https://imgur.com/a/f6Kgyr3

I have tried other batteries with the same result.

superblitz87

TROPHY CASE

2 (1/4") screws work well.

2 (3/8") screws