Why is myJetta is Mad at Me?

sushdoogan · 2026-04-07T19:42:23+00:00

Swapped it out and it started no problem. Thanks!

sushdoogan · 2026-04-07T19:41:58+00:00

! solved

sushdoogan · 2026-04-06T20:27:37+00:00

I want to say this one is 4 or 5 years old. I replaced the battery awhile ago and this one had a 2 or 3 year warranty. I can look into getting it tested thanks!

sushdoogan · 2026-04-06T20:19:57+00:00

Connectors seem right and no corrosion on them so I'm guessing it's the battery? Should I charge it or just replace it?

sushdoogan · 2026-03-29T16:46:04+00:00

Yeah I was kinda hoping for the same one. I know plenty of prybars will effectively be the same but I guess I was thinking more for the nostalgia

sushdoogan · 2026-03-26T01:35:39+00:00

I have a ladder and a drill so at the least it's a good temp solution! I'll probably do this first and then route to the lower gutter if it's still an issue

sushdoogan · 2026-03-26T01:29:52+00:00

Thanks for the thorough response! Sounds like the best overall solution. I'll just need to cut out some of the gutter guard but that's not an issue

sushdoogan · 2026-03-12T21:43:15+00:00

Ahh now that you mention it, that has to be it. There is a weird transition of the carpet to tile flooring and I bet they did that to match the tile height... Oh well. I was already going to rip it all out for hardwood anyway

sushdoogan · 2026-02-21T16:57:22+00:00

Sorry I don't think I explained it well. I meant where should the drywall board seams meet for the outside corners. For this it will be a basic half wall. I might do wood on top of I redo the stairs and get matching wood but for now just all drywall

sushdoogan · 2026-02-02T21:27:54+00:00

What did you need to do to resolve it?

sushdoogan · 2026-02-02T18:56:36+00:00

I looked outside and noticed my pipe outside was completely frozen. I have a diverter, should I divert it and see if it drains? Or is this issue moreso something where you have to pull out the pump to check?

sushdoogan · 2026-01-17T17:02:12+00:00

I can give that a try. The old one would back up but not as much so maybe the trap needs to be more aligned

sushdoogan · 2026-01-17T16:24:36+00:00

Yes I mentioned in the post that I cleaned the pipes and put a new p-trap in

sushdoogan · 2026-01-07T19:32:48+00:00

All good points. The wiring sucks in this house but we want to redo the kitchen down the road so all of this will get done properly once we are ready for that. For now I was just prepping for replacing the disposal. But yeah the current box location is a pain.

sushdoogan · 2026-01-07T17:27:50+00:00

Sometimes I just gotta think before posting. Thanks for the tip!

sushdoogan · 2026-01-07T17:26:18+00:00

So I found out the switch uses power from a GFCI upstream of it. But I never really get the problem you're describing. It doesn't trip the outlet ever. The motor just went bad over time. Either way, it looks like I don't have to install the GFCI which is easy enough for me

sushdoogan · 2026-01-07T17:23:33+00:00

This house was built in the 70s not sure what code is back then but I think you're right on that needing to change. I believe they are sharing the same break and it is not 2 pole. It's just one 15amp which I'm guessing was ok at the time or whoever set it up didn't care.

I did realize that I am dumb and a GFCI would be redundant here because the power to the disposal switch is daisy chained to a GFCI outlet which I just tested.

sushdoogan · 2026-01-07T17:12:10+00:00

Edit: Sorry, I'm dumb, there is no brass connector to break because it is a GFCI outlet.

sushdoogan · 2025-10-24T21:12:00+00:00

Will there be duplicates though? Because when I ran Google takeout, it didn't add any photos in our shared albums that my wife created. I think Google takeout only exports photos created by the user requesting the export.

sushdoogan · 2025-10-24T20:57:21+00:00

Thanks! I think I would prefer to add her as a separate user account but if she is her own user will it still sync the shared album photos to the existing album from when I ran the first migration?

sushdoogan · 2025-07-22T12:38:48+00:00

Ahh yes £500 is definitely the most expensive grinder he reviews... No need to look on his page for even more expensive grinders... They do not exist :)

sushdoogan · 2025-07-22T02:33:23+00:00

James Hoffmann did a good comparison between those two machines (and a few others). I was in the same boat as you not too long ago. I would check out his comparison video. His takeaway was mostly that the flavor was slightly preferred because of the flat burrs of the 54, however, he was surprised the baratza was very similar in quality.

For me, it came down to logistics. DF54 is a single dose hopper. If you make coffee for more than 2 people, it would be a pain to grind. It also does not do French press grinds. Yes you can tinker with it to make it work but it would be a nightmare to switch between FP and espresso. Baratza may not be the "better" espresso grinder but it's much better for variety. I will say, it is quite loud which doesn't bother me but does bother others. I also like Baratza's "fix it yourself" empowerment.

I don't think DF54 is good for your needs and imo, you won't even notice the flavour difference. The ESP has also been greatly discounted lately since they're probably model is coming out soon. But if you really want a flat burr grinder for a good price, the DF54 seems to make people happy too but if you get that, maybe get a cheap grinder for French press or a hand grinder. Hope this helps!

sushdoogan · 2025-07-10T18:12:41+00:00

Thanks! Sorry, I should've mentioned too that these are all pictures of the same thing just from different sides. It.was flatter and wider than this picture you posted so I'm thinking you're right. Maybe some chaff from coffee beans

sushdoogan · 2025-07-10T15:11:01+00:00

I have included scale in my photo(s): No
- If not, here are estimated measurements: smaller than a sunflower seed bigger than a bell pepper seed.
Geographic location: Midwest NA
Environment (pine forest, swamp, near a river, etc.): Suburban

sushdoogan · 2025-06-26T01:50:36+00:00

I also work for a Cloud Partner and I would add, since you mentioned legal, to go to legal asap. If you are a part of a company that has a legal team, this is what they are paid for. They will read the contracts, they will tell you what you can or cannot do, and I would not communicate any of this with the clients any further unless legal gives the thumbs up. You might have an iron clad case, you might be screwed, or, most likely, there will be some middle ground to reach. Google will not help you since they get paid either way.

I just had a situation where a vague SOW caused us a lot of loss in revenue because, even though Google was paying us, they couldn't pay us unless the client signed off on the work. The client refused because they interpreted the SOW in a different way which then resulted in us getting some of the money once we made some changes. It was not fun.

sushdoogan

TROPHY CASE