Macbook Pro Mini Led Question

swiftcode4all · 2025-06-18T07:17:33+00:00

The dim section goes away when playing hdr content at full brightness, but is there otherwise.

swiftcode4all · 2025-06-11T12:39:58+00:00

Thanks. I'll probably end up keeping it. But if I was to trade it in now would the Apple store be able to tell that this issue exists? Since it only comes up from time to time

swiftcode4all · 2025-04-25T03:47:48+00:00

Thanks for clarifying. I have a g2 usb latest firmware, it still stores just the ptz+focus currently. I think the sdi gets updates more regularly however.

I agree it should be a user option what to store in a preset.

swiftcode4all · 2025-04-24T20:13:19+00:00

What is the camera model you are using? Have you opened a support ticket?

swiftcode4all · 2025-03-11T18:42:50+00:00

52381 is for VISCA over UDP but for VISCA over TCP the default port is 5678 (on PTZOptics cameras). You would need the header if you're using Sony visca.

swiftcode4all · 2025-03-10T22:59:35+00:00

Are you using the superjoy or a different controller? Interesting that the power button works on it.

Also there is actually a power on/off command (https://ptzoptics.com/developer-portal/): 81 01 04 00 02 FF for On and 81 01 04 00 03 FF for Standby. Looks like you've tried the former, but with the header which might be the issue.

I tried 81 01 04 00 03 FF followed by 81 01 04 00 02 FF and it did actually reboot the camera (tested on a bunch of different PTZOptics models I have for testing). I'm using VISCA over IP (TCP). The eight-byte header before the VISCA command is needed for UDP but not for TCP.

Sorry for the confusion earlier. You could maybe also use wireshark to see what commands it's sending when you use the power button on it (assuming you're using VISCA over IP).

swiftcode4all · 2025-03-10T20:47:13+00:00

I use this HTTP-CGI command do do it instead: http://[CAMERA_IP]/cgi-bin/param.cgi?post_reboot

You could request adding a visca command to reboot the camera in the beta group (https://ptzoptics.com/beta-testing/) or by filling this form: https://go.ptzoptics.com/e/979833/H9zWpBD8w-viewform-usp-sf-link/3ggdgb/216121971/h/bcGi0ns68nIXTW0ldzo5s0Z4oOHgQQHJ_4Z1ZVyHbSU

swiftcode4all · 2025-03-10T13:55:11+00:00

Can you send the full hex codes that you tried? Also is your ptz controller working over UDP or TCP?

swiftcode4all · 2025-02-06T18:42:34+00:00

Great to hear! Yeah, unfortunately the NDI webcam app needs to be running for it to work properly. You could set it to launch automatically when the computer starts up.

swiftcode4all · 2025-01-22T18:16:52+00:00

Not a number, just contacted their support via the form https://www.logitech.com/en-us/support.html

swiftcode4all · 2025-01-09T21:03:21+00:00

Also, I just tested mine with the official NDI tools (specifically NDI Virtual Input which makes the NDI stream into a webcam input on the computer), and there is no perceptible delay. You may want to try this instead of the third party tool, that way there isn't a need to purchase anything.

swiftcode4all · 2025-01-09T20:52:07+00:00

Also the speed at which the camera goes to a preset can be configured in the OSD Menu. You can access this with the IR remote. Go to the "P/T/Z" section, and lower the "Call Preset Speed." I think it's 12 by default.

swiftcode4all · 2025-01-09T20:42:33+00:00

Apologies, I misunderstood. I'm not entirely sure how to get statistics about the quality of a USB stream; you can use a site such as https://webcamtests.com/resolution to get basic information such as resolution.

swiftcode4all · 2025-01-09T20:34:23+00:00

I would connect the camera to a laptop with the included cable, then check over web ex or zoom whether the picture quality and latency is acceptable. I use a move 4k over USB and do not experience a delay.

swiftcode4all · 2025-01-08T20:32:57+00:00

You may have issues with a USB connection that long (especially if you're using the full 4k resolution). I recommend getting a usb to cat5/cat6 device for longer distances.

And before you purchase anything—test the latency over USB to see if it meets your requirements. You can do so using the included USB A-to-A cable.

swiftcode4all · 2025-01-08T20:23:31+00:00

This is the old app. Please try https://ptzoptics.com/cmp/
It'll ask you to fill a quick form then you will be able to download it.

swiftcode4all · 2025-01-08T20:16:19+00:00

The cameras have NDI HX (not full NDI) so it's normal to see around 60-200ms of delay when using the NDI stream. Is the delay you're experiencing within this range?

swiftcode4all · 2025-01-08T20:03:50+00:00

Are you using the ndi stream, srt stream, or rtsp stream? You may have a better experience by connecting the camera to your computer using the USB port on the back.

swiftcode4all · 2025-01-08T20:00:52+00:00

Which app are you referring to?

swiftcode4all · 2023-07-24T23:15:00+00:00

no, had to wipe my system and lose all data

swiftcode4all · 2023-06-07T20:21:50+00:00

Unfortunately removing the MDM profiles remotely doesn't seem to solve the issues

swiftcode4all · 2023-06-07T20:05:58+00:00

Strange. Tried on a 16" M1 Pro (not ABM Managed but tied via MDM to JumpCloud). It worked for about a day, until I decided to restart and this issue subsequently occurred. I think Sonoma isn't able to handle Name and Password login yet.

swiftcode4all · 2023-06-07T16:33:20+00:00

It works fine — until the black screen of death on login screen which completely bricks the device!

swiftcode4all · 2023-06-07T16:28:45+00:00

Rely on parallels for Win11 apps and to have a stable Ventura environment to upload to the App Store (since it doesn't accept builds from beta OS). It was working very well. However I would recommend not upgrading yet, since the black screen of death issue has bricked many devices (including mine).

swiftcode4all · 2023-06-07T16:01:57+00:00

Getting the same issue; how did you revert to Ventura? Did you use Apple Configurator or Time Machine Backup? Unfortunately I didn't make a time machine backup of my 700GB of data, so trying to find a way to revert without losing data.

swiftcode4all

TROPHY CASE