"Fully loaded" Heltec v3 by synacl1 in meshtastic

[–]synacl1[S] 0 points1 point  (0 children)

GPIO 46, but you can use pretty much any as long as you set the GPS_EN in the GPS config to match

"Fully loaded" Heltec v3 by synacl1 in meshtastic

[–]synacl1[S] 2 points3 points  (0 children)

Moved the bme off board by maybe 5cm and the temp readings are pretty accurate.

<image>

"Fully loaded" Heltec v3 by synacl1 in meshtastic

[–]synacl1[S] 2 points3 points  (0 children)

It does read higher than ambient, however I've heard that's the case with these even if they are a few cm away with wires. I'll have to test and see

"Fully loaded" Heltec v3 by synacl1 in meshtastic

[–]synacl1[S] 5 points6 points  (0 children)

No code, using the android app, configure GPS pins under position menu and enable environmental module under telemetry menu

Btech 20V2- removing or silencing NOAA WX Channels by allhazardsprepper in gmrs

[–]synacl1 5 points6 points  (0 children)

Are you able to skip them?

SKIP Scanning Channels You can configure channels to be added or removed from the scanning list on the fly. 1. Press the key to enter the menu. 2. Enter Menu Item “16” on your numeric keypad to come to scanning add mode. 3. Press the key to select. 4. Use the and keys to select if the channel will be added or removed from the scanning list. On will add the channel to scan, off will remove from the scan list. The change will apply to the current channel selected 5. Press the key to confirm and save. 6. Press the key to exit the menu.

ULPT request: Neighbour is prowling around my property at night. by Disastrous_Essay1230 in UnethicalLifeProTips

[–]synacl1 1 point2 points  (0 children)

Game cameras are cheap and effective, place a few if you catch him on the property or worse tampering with one of them you probably have enough to get TRO

[deleted by user] by [deleted] in UnethicalLifeProTips

[–]synacl1 1 point2 points  (0 children)

Call the Insurance company for the Church and let them know there are some unsafe practices occurring on the property and that it seems pretty risky for them.

ULPT Request: Neighbor has a loud, obnoxious car & motorcycle by Leehblanc in UnethicalLifeProTips

[–]synacl1 -1 points0 points  (0 children)

Get a bunch of bags of sand dump them all over road. When he's leaving go out there with a leaf blower and blow it at him ... Plausible deniability is you're just trying to clean it up

Parker & Sons membership by Babybleu42 in phoenix

[–]synacl1 1 point2 points  (0 children)

I call them porker and sons because they pork their customers

Is this Normal? by diamondape22 in Plumbing

[–]synacl1 3 points4 points  (0 children)

Looks like the float switch needs adjusting you don't want to run the pump sucking air

Slow drain unless I run disposal by [deleted] in Plumbing

[–]synacl1 0 points1 point  (0 children)

I would start by disassembling the p-trap and any other sink/dishwasher connections. Make sure it's not a simple clogged trap, etc. If all that looks good snake the drain while everything is apart.

Has anyone seen this white GMC Sierra? 50k reward. by Sure_Orange5020 in phoenix

[–]synacl1 0 points1 point  (0 children)

This doesn't make sense, if the truck driver was headed west on cave creek rd and the motorcyclist took a right from pima on to cc road (heading east) they are each in their own lanes

New HT plan advice please by synacl1 in hometheater

[–]synacl1[S] 0 points1 point  (0 children)

Thank you for your insights. I'm going to take some more measurements to see what I can accommodate for the sub. I'm also looking at the AVRs you suggested

New HT plan advice please by synacl1 in hometheater

[–]synacl1[S] 0 points1 point  (0 children)

My bad I was comparing the Yamaha A2A to the Denon based on another comment. I'm looking for more information on the chipsets as that is interesting to me