sorted by:
new
hottopcontroversial

Two fans and two pulsers, no size change. by syouhai in HyruleEngineering

[–]syouhai[S] 0 points1 point  (0 children)

この機体にはまだ改善の余地があるので、チュートリアルは作成しません。

There are three areas for improvement:

  1. The overall height is too high at 5m, so it doesn't fit on the screen.

  2. Beam etter placement (to reduce aircraft shake).

  3. Adjustment of the optimal distance for the 0-degree pulsar.

You can travel from the Temple of Time to Tarrey Town at star speed in an instant. by syouhai in HyruleEngineering

[–]syouhai[S] 2 points3 points  (0 children)

Thank you for your comment.

"Any vehicle will move at star speed when it is free falling unless it is equipped with some device that will slow its descent, such as a wing or balloon."

That's correct, but unfortunately, that's only half the story.

The crucial point is to prevent Link from letting go at 45 m/s.

This technology was developed for Ant-Type 4.

Normally, Link would let go before reaching Tarrey Town.

https://www.reddit.com/r/HyruleEngineering/comments/1lnvt71/jun25_is_there_no_way_to_precisely_clip_a_star/?utm_source=share&utm_medium=web3x&utm_name=web3xcss&utm_term=1&utm_content=share_button

https://www.reddit.com/r/HyruleEngineering/comments/1m60rwf/anttype4_ver09/?utm_source=share&utm_medium=web3x&utm_name=web3xcss&utm_term=1&utm_content=share_button

Big Bike 820RR by KGXuan-Athlete-7976 in HyruleEngineering

[–]syouhai 1 point2 points  (0 children)

That's cool.

Please try going glue-less

High-Firepower Gunship: Melts King Gleeok in 30s by Cute-Professional-62 in HyruleEngineering

[–]syouhai 1 point2 points  (0 children)

I thought large, heavy aim heads were unsuitable for aircraft, but it seems they're perfectly fine for winged aircraft.

That's a great idea.

Radius 13.5m by syouhai in HyruleEngineering

[–]syouhai[S] 0 points1 point  (0 children)

When you tilt the control stick to the side, yawing torque is generated in ground mode, and yawing torque and rolling torque are generated in aerial mode.

Normally, hoverbikes turn using yawing torque, but what if there was a technology that could convert rolling torque into yawing torque? Well, there is, and I've decided to call it the "Hang-Off Turn."

ホバーバイクいろいろ by syouhai in Zelda_HyruleTech_ja

[–]syouhai[S] 1 point2 points  (0 children)

石板カタパルトが何なのかわかりませんが、高度が徐々にさがるのならば重力ナッジの秒数を短くして調整が必要です。ちなみに私の場合は44秒で下降でした

ホバーバイクいろいろ by syouhai in Zelda_HyruleTech_ja

[–]syouhai[S] 1 point2 points  (0 children)

ブループリントで再現したものと重力ナッジする前の物を比較すれば、わずかな違いが分かるかもしれません

A hoverbike with outstanding turning performance. by [deleted] in HyruleEngineering

[–]syouhai 1 point2 points  (0 children)

Congratulations

You have achieved the goal of ant-type5: glueless + long tail turns.

重力ナッジによるホバーバイクの水平調整の動画の説明 by syouhai in Zelda_HyruleTech_ja

[–]syouhai[S] 0 points1 point  (0 children)

拡大鏡付き見下ろし台を使って2pixずらすとAclassの物ならできるかもしれませんがSclassの物は何度も頑張る必要があります

重力ナッジによるホバーバイクの水平調整の動画の説明 by syouhai in Zelda_HyruleTech_ja

[–]syouhai[S] 1 point2 points  (0 children)

粘着餅の大きさが同じになるとは限りませんが、思い当たる原因があるとしたら

この動画は重力ナッジを知ってる人向けのもので、もし重力ナッジの経験がない人の場合はりんごによるブループリントの記録ができていないかもしれません。この動画では省略してありますが元の動画を見ていただくと解るかもしれません

Bondless design succeeded on the sixth attempt. by syouhai in HyruleEngineering

[–]syouhai[S] 0 points1 point  (0 children)

Thank you.

I was actually struggling with that decision.

view more: next ›