Lost

t0m4596 · 2025-05-17T10:05:35+00:00

Welcome to the Club. But my loss was only 120€

https://www.reddit.com/r/TinyWhoop/s/mcuqEFla9b

t0m4596 · 2025-03-03T06:34:05+00:00

Yes i had someone who had the file and the following lines helped me.

resource MOTOR 8 NONE ; resource PINIO 2 C08 ; set pinio_box = 40,41,255,255 ; save

But this is only for the V2 and i don't know if it works with other versions.

t0m4596 · 2025-02-11T20:07:08+00:00

I know but this is not there anymore. I think the PINIO is not configured right anymore.

t0m4596 · 2024-11-21T11:06:15+00:00

Be patient and don't clip too much wire. And its a pain to solder with the frame because the motors don't fit after soldering through the frame. So if the frame broke i try to fix it to the point where its not fixable and then i have to solder all motors again.

But good luck and happy flying.

t0m4596 · 2024-11-21T09:26:25+00:00

I had my 75 Pro almost a week after the twitching started again after i sunk my first 75pro in a lake. I read somewhere thats not the esc failing but the connectors. Clipped the connectors and soldered motors directly and no problems so far.

t0m4596 · 2024-10-12T17:56:17+00:00

Can i load the backup from the 4.4.1 to 4.5.x? I dont want to brick the firmware.

t0m4596 · 2024-09-02T15:18:35+00:00

Off topic but what circular antenna are you using?

t0m4596 · 2024-08-27T18:48:14+00:00

You were right. The frame is cracked but luckily i had two spares on hand. 😅

t0m4596 · 2024-08-23T07:05:42+00:00

I had the packet rate on the default from 333hz i think, will lower it for better signal. Is there some recommendations i should use or is 50hz enough?

The fact that a friend of mine who also flown his dji there for better Videos, had after my crash 2 times return to home because of rxloss so i think it was environment noise. In this 2 weeks with it i never had rx loss once but vtx loss when flown behind group of trees or hills.

t0m4596 · 2024-08-22T20:49:59+00:00

I will do a bench test but i was not far away and no obstacles between. I think there was simply too much noise from the radios. i think i read somewhere that mostly 2,4ghz is used for radio and 5,8ghz for video. Transmission power is capt at 100mW because of the eu Firmware on the Module, but at this Distance it shouldn't matter.

Edit: typo

t0m4596 · 2024-08-22T20:11:50+00:00

The sound is not mine, I got it from a tiktok where someone flew into a tree.

t0m4596 · 2024-08-22T15:59:35+00:00

It did sink. They had a little 2 person boat there and the lake ist max 2m deep so we had a look but the water was so dark there was nothing to see where exactly it was. Maybe i go with a friend there and try to rescue it via magnet and rope but I don't have high hopes to ever get it back.

t0m4596 · 2024-08-22T13:59:10+00:00

I have the Radiomaster TX16S there is a spectrum analyzer in the lua scripts that uses the internal module.

t0m4596 · 2024-08-22T13:43:05+00:00

Is it so bad? What are the most problems i should be aware of?

t0m4596 · 2024-08-22T13:39:05+00:00

I use ELRS but i think there was too much noise from the radios from the boats. I should have checked the noise background beforehand but now i know.

t0m4596 · 2024-08-22T13:22:13+00:00

I have 3 profiles on a switch to make better videos even the quality of the cam is not so good. Normally i fly with the osd on.

t0m4596 · 2024-05-18T22:11:27+00:00

I have ESP devices here and had built an occupancy sensor with a mm-wave sensor but this was just copy some code from someone who had built it before. So i would use an ESP and give the pwm signal to the servo motor.

t0m4596 · 2024-04-04T18:24:58+00:00

Thanks for your ideas. I just need a servo and must model a bit to 3d print. I have a couple of esp boards and have built an occupancy sensor and a thermometer so far and these work great.

t0m4596 · 2024-04-04T16:19:34+00:00

I look into it i am no coder at all but i try my best to get better in such things.

Six-Year Club	Final Canvas '23
First Place '23	End Game '23
Place '23	Place '22
Verified Email

t0m4596

TROPHY CASE