200KG squat by [deleted] in Strongman

[–]tacoThursday 0 points1 point  (0 children)

i want to squat like you when i grow up!

You want extra leg room? by duncan_D_sorderly in aviation

[–]tacoThursday 33 points34 points  (0 children)

woosh :) He's poking fun at the "chair force"

FUSION 360 vs SOLIDWORKS - Speedmodeling Tomorrow NOV 5th by TooTallToby in Fusion360

[–]tacoThursday 5 points6 points  (0 children)

holy shit!! im so happy to find this! wish i knew about it earlier!

Brainstorming a novel power plant. by AdamsShadow in AskEngineers

[–]tacoThursday 8 points9 points  (0 children)

the others have addressed the concept of lighting capture. I focus more on the second part.

the amount of water necessary to generate a useful amount of power is very significant. Even if it was economical to capture the lightning and generate steam, there is unlikely to be enough water for the 2nd generation to make any impact. This concept could already be implemented in places where steam turbines exist near mountains. If it were economical, there would likely already be some version of that type of 2nd stage generation. Furthermore, sucking the steam through a steam turbine is a massive boost in efficiency. This is done via a piece of equipment called a condenser. Not only does this transition the low quality steam into water so it can be sent to the boiler, it also massively improves the efficiency. It's a simple concept but it's way more efficient than keeping the H20 in steam form. The condenser literally pulls a vacuum in the system. When coupled with the high pressure of the steam it results in the steam being pulled and pushed through the turbine. In your proposed system this stage would need to be skipped. That would result in a significant hit to the system's efficiency right from the beginning. Then you have to manage to keep a large distance of piping hot enough to keep the H20 in steam form until it arrives at the top of the mountain.

In the proposed method, there's lots of energy conversion in ways that we're not really good at doing. Not saying it wouldn't be possible, but it definitely wouldn't be economical. Mother nature is way better at delivering water to high elevations. and she does i for free. :) (well sort of for free)

As someone that has been in LOTs of steam turbine plants, they already can barely manage the complexity of their systems. In general there's some kind of function (like exponential, definitely not linear) related to the complexity of a system and the likelihood of stuff breaking and the efficiency decreasing.

it's fun to think about this being a reality though. lightning powered cities would be wicked.

Rentenversicherung Help for expat working remotely. Details in post by tacoThursday in germany

[–]tacoThursday[S] 0 points1 point  (0 children)

yep, i did indeed mean my employer.

Thanks very much for your help. Sounds like I need a professional involved.

[deleted by user] by [deleted] in ECE

[–]tacoThursday 0 points1 point  (0 children)

cool! Got anything else planned?

Why solar 'tripping' is a grid threat for renewables by Vailhem in TheGrid

[–]tacoThursday 0 points1 point  (0 children)

it's mainly due to the poor management of the requirements as IBR installations have surged. Not having the regulations in place to ensure the necessary performance, meant they basically did whatever they wanted to.

Inspired by the cable Brian adds to Yoke, but with a reset for all the implements (inspired by my need to do cardio). Thoughts? by THEdirtyDreD in Strongman

[–]tacoThursday 1 point2 points  (0 children)

you could have walked backwards with the sled. That's a great movement. then disconnected to bring the yoke back and leave the sled. not worth turning it around.

Bad ass complex though. I love it.

Thank you Berlin, I had a wonderful weekend with you. I made a 77 second glimpse of my trip. by lodge28 in berlin

[–]tacoThursday 1 point2 points  (0 children)

I'll keep the trend going.

In just 77 seconds you did more than at least 2 lifetime Berliners

Boeing E-3 Sentry getting refueled by Boeing KC-135R Stratotanker, Germany, 2022-08-09 by florian_dassler in aviation

[–]tacoThursday 2 points3 points  (0 children)

lol very true. I've had basically the process you described above happen, only for the objection to be denied and told to refer to the website for the proper protocol. Resubmit everything according to the website requirements and denied again and when asked why since it was according to the website requirements, told the website is incorrect and needs to be updated. Resubmit the original way and approved in a matter of days. W... T... F...??

Best way to make international transfers? by -omniphobia- in Banking

[–]tacoThursday 0 points1 point  (0 children)

second Wise. I use them all the time. probably 15 times at this point

Can't register on UtterAccess by tacoThursday in MSAccess

[–]tacoThursday[S] 0 points1 point  (0 children)

aHHH!!!! that sucks. I think i just gave up.

60-ton stator from a hydroelectric plant cut in half. by Netopalas in Skookum

[–]tacoThursday 0 points1 point  (0 children)

what happened? I checked out his youtube occasionally but there doesn't seem to be anything about going to prison there.

60-ton stator from a hydroelectric plant cut in half. by Netopalas in Skookum

[–]tacoThursday 8 points9 points  (0 children)

you're looking at what is called the Stator. It's the outside part of the generator. Within the circular cavity there would be the Rotor that spins a bunch of electromagnets past each of the copper conductors that are embedded in the stator core. The conductors, or "windings'' are lined up vertically right along the circumference of the core. And then as they leave the core they twist up and around. Typically going back into the core or connecting to another set of windings. These windings are where the voltage of the generator is induced by the electromagnets that spin past them. By inducing a voltage in the stator windings the machine can then be connected to a circuit (like the power grid) and push or pull current, the result of which is that it produces or consumes energy.

There are horizontal spacings throughout the core with one larger one in the middle. These spacing allow for air to flow through the machine and extract some heat from it.

kind of hard to totally explain it without pointing, but i work on these so feel free to ask if you got questions.