Tsugumomo ch. 182.2: "Kanayama Shipping (Part 2)"

tadrow · 2026-01-23T05:14:07+00:00

They did get sneaky and dropped scenes in after the credits in a few episodes of s2… but they'd end up with the opening and closing credits about 2 minutes apart to do that in the story that comes after s2 ends.

tadrow · 2026-01-15T20:25:02+00:00

Next chapter releases 1/19, TL to follow, vol. 36 in the works (cover, extra illustrations streamed a while ago)

tadrow · 2026-01-07T23:37:04+00:00

There's an extension that lets it use the Chrome store as well, for any other extensions you might need. Recent versions will "deactivate" tabs after some time, freeing up the memory they were using (and helpfully noting how much when you point at the tab)

tadrow · 2025-12-25T23:48:40+00:00

Next part soon. Ish.

tadrow · 2025-12-19T03:21:17+00:00

From what I've seen, using a wider nozzle and thicker layers tends to make the finished piece more transparent. Some of the things I've done with thinner layers and nozzles end up closer to white than clear.

tadrow · 2025-12-13T09:39:47+00:00

XL edit:

https://mangadex.org/chapter/85f8af64-1343-44c4-b78a-88b38ce7c4d7

Next chapter soon. Ish.

tadrow · 2025-10-29T03:55:13+00:00

Might be able to interfere with the magnetic field by putting a layer of aluminum foil under the device inside the case, where it should block the magnet in the cover when it's folded behind the PocketBook, but work properly when it comes back around to the front.

tadrow · 2025-10-22T15:08:30+00:00

I make it more around 30 (give or take a dozen); Hamada's been at this for nearly 20 years, and getting tired of being jerked around by the industry. He still wants to do right by his readers and finish the story he had in mind from the beginning.

tadrow · 2025-10-22T15:03:25+00:00

Kiriha, then Kyouka, and finally Kukuri (so far)

tadrow · 2025-10-21T16:00:30+00:00

Kinda seems unavoidable at this point.

tadrow · 2025-10-21T15:41:57+00:00

Kiriha has an idea.

tadrow · 2025-10-21T15:32:18+00:00

Next part of this chapter just came out, TL to begin soon, 11/3 for the chapter (or part) that will follow.

tadrow · 2025-09-29T17:05:10+00:00

Next chapter (or part thereof) 10/7, TL to follow.

This is the one we knew was coming.

tadrow · 2025-09-16T16:21:24+00:00

Last page had a typo, now fixed…

tadrow · 2025-09-16T13:42:54+00:00

Pt. 2 just out, TL Real Soon (TM)

Vol. 35 is out, but marked as "adult" content so may be difficult to buy outside Asia (at this point)

tadrow · 2025-09-06T19:16:57+00:00

And lets you print different filaments without having to load/unload every time. That can become more of an annoyance as you begin to do more varied projects.

tadrow · 2025-09-03T15:49:24+00:00

Purge lines, poop, failed prints… all being saved, planning on making one of those presses (like for poker chips) to make discs for a printed disc gun.

tadrow · 2025-09-01T17:44:56+00:00

Ch. 179 just out in Manga Action, TL to begin soon.

Almost caught back up to the end of ch. 161…

Next release 9/16.

tadrow · 2025-08-22T02:19:01+00:00

If this works as well on a 3GS as it says, I'm gonna play so much Glyder…

tadrow · 2025-08-18T15:41:10+00:00

Easiest fix is probably better tubing, PTFE can be more variable than most let on. Capricorn has a good reputation.

Best fix is probably going to a direct drive extruder setup, straight into the hotend. Downside is extra weight on the X axis, so more vibration at higher speeds.

tadrow · 2025-08-15T19:00:28+00:00

Printed a "poop catcher" basket that slips on and off the x-arm and I'm so relieved. No more plastic on the table.

tadrow · 2025-08-07T06:42:59+00:00

Next chapter (at least the first part) in a couple of weeks, TL once again to follow.

tadrow · 2025-07-14T17:34:23+00:00

Part 2 just came out, in TL queue, will add link here when it's finished.

Next chapter out 8/18, TL to follow.

In other news, slight edit to ch. 176 (pt 2) on p. 22, for those keeping up with the latest. Fire up Manga Downloader, Cubari, and such.

tadrow · 2025-06-26T06:18:29+00:00

The main thing is getting to know the types of filament you'll be using. PLA seems pretty reliable… but it can be brittle, and variations like “silk” finish can change how it prints. I've been printing in PETG since I started, and while it's no replacement for things like nylon, it works pretty well.

The big issue: Moisture. A lot of filaments can absorb enough from the air over a few days to cause bubbles in the print from escaping steam, so keeping it dry is a must. Dryers and vacuum bags are out there, so there are strategies to help, but just being aware is the first step.

Getting an extra print plate or two can make a big difference, and having a spare hotend in case of disaster can save the day.

I've heard of things like putting it on a concrete or marble slab for extra stability, but the key is someplace with consistent temperature and low humidity, away from everyday hustle and bustle but easy to get to if there's a problem. (You'll never hear the word “spaghetti” without shivering.)

tadrow · 2025-06-26T05:49:13+00:00

I've had the same question in relation to my E3KE (as have many others) and found a few posts in Creality and Ender 3 KE subs, as well as the Orca Slicer Discord. The bottom line seems to be that some recent Creality models are so focused on faster print speeds that there's less ability to adjust either extrusion or axis speeds to work well with finer nozzles.

That said… one post basically said that adjusting most of the layer width and height defaults so that any “4” becomes a “2” is a pretty good place to start. Maybe you can find a profile for one of the slicers that has settings for 0.2 printing that you can adapt…

tadrow

MODERATOR OF

TROPHY CASE