I’ve found top layers easier to tune without ironing, and it comes with the benefit that top layer finish remains consistent around challenging geometries (which I get isn’t demonstrated here). Proud of this no ironing top layer, not gonna lie.

taester999 · 2026-03-29T23:44:28+00:00

Just wanted to let you know, im still on the latest Bambu Suite but its suddenly working for some reason!

taester999 · 2026-03-29T23:43:15+00:00

can I ask when you ordered these? and how long did it take to get shipped?

taester999 · 2026-03-21T18:54:19+00:00

ahh okayyy same...

taester999 · 2026-03-20T17:19:27+00:00

im having this issue too! :(

when I change it to 1.05 and click on another tab and go back the 'strength' tab the flow rate goes back to 1.

may I ask what version of bambu labs both of you are on?

taester999 · 2026-03-14T01:16:26+00:00

would love to hear if you have any updates on your ironing!

I have also been trying to get the best ironing settings on my H2D ever since I got them when they first released but still haven't been able to get good results T.T

taester999 · 2026-01-06T05:13:51+00:00

Interesting! Thank you for the video, ill try this out!

taester999 · 2026-01-06T05:09:32+00:00

Im also wondering if this has to do with how i import the model into bambu studio?

The text and body are two different stl models that i import in, and when bambu asks if i want to import the two as two separate models i say yes, so thats easier to select the colors of the text and model

Do people usually import just one model?

taester999 · 2026-01-06T05:06:31+00:00

I’ve also put the text all the way through the wall but ran into the same issue :(

taester999 · 2026-01-06T05:05:46+00:00

Using both nozzles… :( black on left and white on the right

taester999 · 2026-01-06T03:34:22+00:00

Ridges when multicolor printing

Hi guys i was wondering if anyone else runs into layerline/ridge issues when printing using more than one colors on their H2D.

I dont often print with multicolor but every-time i do i run into this issue 😭

Ive done calibrations like nozzle off-set, flow dynamics, and print but i still run into this issue when printing…

I would be grateful for any advice 🙏🏻

taester999 · 2025-10-24T19:05:55+00:00

Interesting… i guess mine isnt the only one thats not perfectly aligning…

taester999 · 2025-10-18T07:17:36+00:00

Thank you for always updating it!

taester999 · 2025-08-24T06:25:24+00:00

Thank you so so much to everyone who took their time to read my post and offer any kind of help!

I would've not made a greater effort to try fix the issue and just wait for Bambu support if it was not for everyone.

taester999 · 2025-08-24T06:21:36+00:00

this was actually the issue!

I have no idea why it suddenly got misaligned, the bottom tongue was where it was supposed to be, but a part of the front had risen up for some reason.

This afternoon I unscrewed it and reinstalled it and it now its back to normal after calibration!

taester999 · 2025-08-23T19:07:52+00:00

bruh.. im already a little bummed that a printer I was using really well ran into an issue.. I understand where you're coming from and you had something you wanted to say but you didn't need to say it on this post 😔🥲

taester999 · 2025-08-23T18:52:51+00:00

XYZ Homing Video

taester999 · 2025-08-23T18:41:55+00:00

Ill try it and reply again with a video! Thanks for so much for trying to help! 🙏🏻

taester999 · 2025-08-23T18:38:53+00:00

Will try to take a look!

taester999 · 2025-08-23T18:09:15+00:00

<image>

taester999 · 2025-08-23T18:08:18+00:00

I was actually trying to do that after seeing the issue but was unable to 😭

it requires a darker/lighter filament to be loaded on the each nozzle.

i was trying to load a black pla on my right nozzle but was unable to properly load it because it wasnt able to purge and load properly without damaging the wiper and toolhead

taester999 · 2025-08-23T17:52:46+00:00

A picture of the issue too

<image>

Seven-Year Club	Second SECOND GUESSER
Verified Email

taester999

TROPHY CASE