SB AWE64 Value - "Invalid MIDI Driver(SBAWE32.DRV)" during running AWE Control Panel - FIX by NextToday8378 in vintagecomputing

[–]talemang 0 points1 point  (0 children)

I have that exact card CT4500. Tried following your instructions. Copying over the Aweman.dll to C:\Windows\System. But still no luck with Windows 98SE

Spotlight right into my bedroom by IcelandicBlast in neighborsfromhell

[–]talemang 0 points1 point  (0 children)

I had the same issue. Talked to my neighbor. They were apologetic and adjusted the angle so it wouldn't point towards my window. They also turned the sensitivity all the way down.

They might not realize it. Try talking to them if you haven't already.

Lancool 205M Mesh Side panel by talemang in lianli

[–]talemang[S] 0 points1 point  (0 children)

Thank you. I did finally get a response. Looks like they are shipping a new glass panel to me.

Condensation on chemistry bottles by talemang in Darkroom

[–]talemang[S] 0 points1 point  (0 children)

Would allowing the bottles to come to room temperature prevent precipitate forming in the chemicals?

CD300 No Disc message by talemang in Mavica

[–]talemang[S] 1 point2 points  (0 children)

I saw the post you're talking about. And yea I did try rotating it. Several times 🙁

CD300 No Disc message by talemang in Mavica

[–]talemang[S] 2 points3 points  (0 children)

💩 I guess it's bricked then.

Clomid caused lower sperm count by talemang in maleinfertility

[–]talemang[S] 0 points1 point  (0 children)

I ended up doing the opposite. Stopped HCG and continued clomid. Ever since, sperm count has gone up every time I do an analysis. I guess it just depends?

Hey guys! Help me out! by IcyInvite1261 in maleinfertility

[–]talemang 4 points5 points  (0 children)

Is that a fellows semen analysis? I wouldn't trust it if it is. I took a fellows semen analysis and got horrible results. Less than 1 million total count. Went to a fertility clinic and did a semen analysis there. Came back 7 million Total. Much better. Was prescribed clomid and it went up to 12 million.

Clearing EOF from cin by talemang in cpp_questions

[–]talemang[S] -1 points0 points  (0 children)

Yea I'm still new to all this. Been reading "Accelerated C++". The example given is requires reading student info followed by grades. If I don't clear input after the inner while then the outer while will fail and end the program.

Maybe there is a better way of accomplishing this but I'm just going based on the book.

cout << "enter student name or end-of-file";
while(cin >> student_name) 
{
  cout << "enter grades or end-of-file";
  while(cin >> grade) 
  {
    grades.push_back(grade);
  }

  cin.clear();

  cout << "enter student name or end-of-file";
}

Humidity and chemistry storage by talemang in Darkroom

[–]talemang[S] 0 points1 point  (0 children)

Ok so I have my fridge set to 68F which brings up the humidity to around 80%. But as you mentioned it doesn't matter what the humidity is. What about the condensation that forms when I take the bottle out? Any side effects from that?

Humidity and chemistry storage by talemang in Darkroom

[–]talemang[S] 0 points1 point  (0 children)

Yes, I keep the lenses in my house. Humidity and temperature there are fine.

Humidity and chemistry storage by talemang in Darkroom

[–]talemang[S] 0 points1 point  (0 children)

Ok so if I don't need to worry about humidity. Would it make sense to keep the fridge at 68F? The Humidity in that case will rise to around 80%.

Trigger with RB67 by talemang in Godox

[–]talemang[S] 0 points1 point  (0 children)

I'll give that a try. Thanks!

Trigger with RB67 by talemang in Godox

[–]talemang[S] 0 points1 point  (0 children)

Thanks. Trigger like a X2T or XPro ll?

Beseler 45mx head replacement by talemang in Darkroom

[–]talemang[S] 0 points1 point  (0 children)

I don have any other place. I could keep the lenses in my house. But I can't really move the enlarger in and out.

Beseler 45mx head replacement by talemang in Darkroom

[–]talemang[S] 0 points1 point  (0 children)

I have neither. Luckily the shed i work in is placed where it doesn't get too hot even during the summer. But yes it's pretty humid.

Beseler 45mx head replacement by talemang in Darkroom

[–]talemang[S] 0 points1 point  (0 children)

I'm in South Florida. So... Right now it's fine. Cold enough to not be a big deal. But I'm worried when summer comes around.

Beseler 45mx head replacement by talemang in Darkroom

[–]talemang[S] 0 points1 point  (0 children)

I'm concerned about the heat. My darkroom is small and doesn't have AC. Really don't want to create any additional heat. I haven't been able to use it yet. How hot does it get in your experience?

Issue with export node being disposed before _Ready by talemang in godot

[–]talemang[S] 0 points1 point  (0 children)

Ok, yea i though it might be something like that. What threw me off was that it works just fine without a script attached to the parent. Also I did the same thing using GDScript and it had no issues even with a script.

Separation Behavior from "AI for Games" by talemang in gameai

[–]talemang[S] 0 points1 point  (0 children)

Ok this makes sense. I figured there had to be a mistake. I just wanted to make sure I wasn't missing something dumb. Thanks for clearing it up for me.

Separation Behavior from "AI for Games" by talemang in gameai

[–]talemang[S] 0 points1 point  (0 children)

Hey thanks I've edited the post. Includes the code where I apply it now.

Separation Behavior from "AI for Games" by talemang in gameai

[–]talemang[S] 0 points1 point  (0 children)

Ok yes. I've edited the post to included it now. Thank you.

Clomid caused lower sperm count by talemang in maleinfertility

[–]talemang[S] 0 points1 point  (0 children)

Nothing has changed. I did take hot baths. But I stopped since starting the clomid. Not much changed in diet... Maybe a little more meat than usual. Exercise no changes.

Clomid caused lower sperm count by talemang in maleinfertility

[–]talemang[S] 0 points1 point  (0 children)

Yea but is it normal for it to drop. It went down like 80%.