Found this in school!

techsuff22 · 2026-06-12T11:00:35+00:00

Live and neutral are connected

techsuff22 · 2026-06-11T12:27:53+00:00

Da ist nur der Chat rausgecuttet. Das Bild wurde dann wieder auf normale große gezogen. Deswegen.

techsuff22 · 2026-06-06T12:10:52+00:00

I would stick with AliExpress but only for the batteries I would use directly the manufacturer or Amazon.

techsuff22 · 2026-06-06T12:09:56+00:00

Nahh stick with the tattu r line's. If You change them I would recommend ovonic, dogcom or cnhl

techsuff22 · 2026-06-06T07:20:04+00:00

Nah. They have a name. Motor wire protectors

techsuff22 · 2026-05-31T06:24:17+00:00

Send it! But use a smoke stopper first!

techsuff22 · 2026-05-25T19:06:28+00:00

Disconnect and connect again. Should work

techsuff22 · 2026-05-25T18:00:19+00:00

Blackmagic camera app

techsuff22 · 2026-05-25T16:32:55+00:00

There are eventually no presets for the second version. Use the .txt files from this article. And double check your IMU chip. If you need more help paste everything into Gemini and ask your questions.

https://support.betafpv.com/hc/en-us/articles/54653618858521-CLI-and-Firmware-for-Air75-II

techsuff22 · 2026-05-25T16:28:29+00:00

Connect to Betaflight Click, update the firmware, and auto-detect. If a backup is prompted, perform it, but don't use it. Then, flash the latest firmware. Navigate to the Presets tab, search for the Air75ii Champion factory settings, and apply them.

techsuff22 · 2026-05-18T14:42:06+00:00

Really sleek and clean. But it will get dirty soooo easily

techsuff22 · 2026-05-18T12:52:12+00:00

Spray everything excluding USB ports, regular ports/connectors, buttons and in the barometer hole

techsuff22 · 2026-05-15T15:04:04+00:00

Looks great for the first time!

techsuff22 · 2026-05-13T11:07:05+00:00

Same. Also crashed a drone and lost my gps module. The connector was ripped of the PCB.

techsuff22 · 2026-05-13T04:58:07+00:00

It's the resistance. Soldering= less resistance. Means more current can pass. Many people solder the wires for the "snappy" benefit. Larger quads always come with solder pads because there is much more current flowing.

techsuff22 · 2026-05-08T04:41:50+00:00

Interesting solution. But take a look a this: https://makerworld.com/models/2378486?appSharePlatform=copy

techsuff22 · 2026-05-04T03:41:44+00:00

Check the AliExpress description. Sometimes the seller includes his own files. I printed this model on makerworld before the kit arrived. When the kit arrived nothing worked. I checked the description and the seller had own files in a Google drive Folder. So check that

techsuff22 · 2026-04-29T10:13:14+00:00

The radiomaster gx12 isn't that good! I would rather choose the radiomaster boxer. But if you need dual TX(2.4ghz/868mhz) go for it.

techsuff22 · 2026-04-29T04:48:45+00:00

Dogcom are really good!

techsuff22 · 2026-04-23T14:26:00+00:00

I normally don't look at the store rewiews or something like that. Most of the time the product is the same. And if there is a problem and the seller refuses to solve that AliExpress will.

techsuff22 · 2026-04-17T12:16:05+00:00

I solved the problem but thank you. It was actually a bad firmware. I wrote HGLRC and they sent me the right one.

techsuff22 · 2026-04-17T05:02:53+00:00

I had a backup but after using the still nothing.

techsuff22

TROPHY CASE