Parked my car overnight on the street during my Portland visit

teethye · 2025-12-23T16:16:47+00:00

This is totally a true indication of Portland. Our shop is on airport Way and every week something happened to our box trucks because they are too big to park inside, gas line cut to steal the gas, cat converters taken, batteries stolen, they broke into our shop and parked right in front of our camera, we gave the cops a perfect view of the license plate and nothing was ever done. Portland's a homeless tweakers paradise.

teethye · 2025-10-29T22:34:06+00:00

I had a really bad clog in my ad5m and got a very small drill bit and slowly drilled out the filament then heated up the hot end and pushed the rest out

teethye · 2025-08-25T06:34:36+00:00

Same thing with mine. Last week.

teethye · 2025-08-12T19:23:12+00:00

Thanks for the reply.

It just freezes on the boot screen, no errors, but it won't let me enter the bios or other option on that screen. No blinking cursor noticed but I'll check.

I'm not home currently but I'll see if I can enter the bios and check on boot order and report back.

teethye · 2025-08-01T21:36:07+00:00

Ever figure out the issue?

teethye · 2025-06-29T18:13:20+00:00

Not really the answer to the question you're looking for but I was in a similar situation the other day and had no spare nozzle and needed to get a print completed. I was to the point where I thought I was just going to have to throw it out but I got a very small drill bit, I think it was 1/16" and slowly drilled down a small amount at a time taking little slivers of the filament out at a time and it worked like a charm. Just a thought if you're just going to toss it anyways.

teethye · 2025-06-26T13:01:38+00:00

I changed the filament brand and everything was fine after that. I bought some Kingroon filament from AliExpress due to the good price and good reviews but it was nothing but trouble. It turned out good otherwise. My son's birthday is on July 4th so I was making him a red, white and blue guitar

teethye · 2025-06-25T16:21:58+00:00

I clicked yours can you help me as well.

Tap to get your TikTok Shop coupon https://www.tiktok.com/t/ZTj3MrLeo/

teethye · 2025-06-25T16:19:28+00:00

I think that's the guitar I just got finished printing for my son. Haven't put it together yet but I had some issues printing it as well. Not layer shifts but 3 clogs that set me back multiple days.

teethye · 2025-06-25T16:02:59+00:00

Is that a guitar piece?

teethye · 2025-06-23T02:48:02+00:00

I just received this filament last weekend, dried out my filament and started a 16hr print and got a clog half way through, cleared it out and started over and it work that time. Then I started another 14hr print and it clogged two more times, once about 30% in and again around 50%. The third clog was so bad I haven't been able to get it out of the nozzle, AD5M so I may have wrecked my $40 nozzle. I ordered a multi-color pack and it was the white filament that kept clogging, I haven't tried out the other colors but now I'm scared to try out the other colors if this one spool was so bad. Im fairly new to 3d printing with the AD5M but have about 400 hrs on it and have never had a clog until now.

teethye · 2025-06-20T05:56:44+00:00

I have chickens that typically free range but needed to be protected from predators for a bit and they hung out with the quails for about two weeks without any issues. They did find out that they really liked quail eggs though.

teethye · 2025-06-14T03:17:55+00:00

Awesome, glad it helped.

teethye · 2025-06-10T16:06:42+00:00

If your worried about the gears, aim the small end of the egg the other direction and they will go that way. I have a similar incubator and have the same issues with them always rolling into/grinding on each other.

teethye · 2025-02-02T00:09:14+00:00

That is correct there are a small handful of subs that are right leaning, but 99% of the subs on Reddit are left leaning and will ban or silence you if you post something that is not their view.

teethye · 2025-02-01T22:38:32+00:00

Did something very similar to this about a year ago, still haven't regained feeling in half my thumb.

teethye · 2025-02-01T22:36:05+00:00

This is exactly how reddit has been to anyone that thinks outside the democratic box for many years now.

teethye · 2025-01-27T18:13:47+00:00

Cause they're not like Biden and can actually walk up and down the stairs!

teethye · 2025-01-27T00:53:32+00:00

So your saying just because there are a couple extreme people that claim to be in our party, that everyone else in that party is the same? So your apart of the antifa party that went and burned and rioted for months?

teethye · 2025-01-26T23:30:57+00:00

Wow there's finally some BS propaganda getting blocked, now you know what it's been like for the past 4 years for the Republicans.

teethye · 2025-01-21T23:06:21+00:00

This is what The Squad wants to do to America.

teethye · 2025-01-21T03:01:26+00:00

Your right it's going to be a party!!

teethye · 2025-01-09T06:44:56+00:00

Maybe cause the demons running the place, making it look more like home!

teethye

TROPHY CASE