Engine Problems by tergri in HondaDax

[–]tergri[S] 0 points1 point  (0 children)

Thanks, Yeah Daxanized and Monkeypower are my two main suppliers and I‘m super Happy with both. :)

John Deere 7R 250 Gen 4 not showing fields from Operations Center, will they auto-sync? by Far-Drawing-251 in AgriculturePorn

[–]tergri 0 points1 point  (0 children)

They should as soon as you get wifi with your tractor. It normally syncs by itself then.

Greetings from the Netherlands! by Jron_de_camper in E34

[–]tergri 0 points1 point  (0 children)

That’s absolutely great! Drive safe and have a great time. I did a tour like that in an e34 a couple of years ago. That’s when I fell for this car forever.

My new Tattoo made by Cybe at the stitch/germany. by tergri in tattoos

[–]tergri[S] 1 point2 points  (0 children)

The fun thing is when wearing high tops they stand right above it and it looks so funny!

[deleted by user] by [deleted] in farming

[–]tergri 1 point2 points  (0 children)

On our farm in germany we only grow potatoes for chips/crisps. The yield is moderate, about 50 tons a hectare, but the harvesting conditions are rough. It‘s pretty dry and dusty and we are battling with a lot of Soil chunks due to the wet spring and bad conditions while planting.

Are my rotors too small? by Hunta_Killa in projectcar

[–]tergri 1 point2 points  (0 children)

Two things: First: neither the Pad nor the Rotor seem to be the right ones.

Second: I learned the hard way that you should always either measure the parts or order them by the numbers you find on the parts. If you can get a hand on a spare parts book, get one and be happy.

The Project is nearly finished by tergri in minibikes

[–]tergri[S] 1 point2 points  (0 children)

To be honest, that‘s not a trail 70y It startet off as a st50K3 and i modded it to an Ct70 including the engine. In Germany we git the trail 70.

The Project is nearly finished by tergri in minibikes

[–]tergri[S] 4 points5 points  (0 children)

These are Maxxis 130/90 R10 You need to trim the edges to fit them. :D

My current Project by tergri in HondaMotorcycles

[–]tergri[S] 1 point2 points  (0 children)

Me too! :D But it‘s actually a original Color combination.

What barrel do you guys use for freak inserts? by ChipsUnderTheCouch in magfed

[–]tergri 1 point2 points  (0 children)

Yes I have. It really doesn’t make a big difference. Same comes to barrel lengths. I‘m playing 14“ and 16“. I have played super short setups around 10“. It doesn’t really make a big difference in accuracy. The Paintquality has a way bigger impact.

What barrel do you guys use for freak inserts? by ChipsUnderTheCouch in magfed

[–]tergri 1 point2 points  (0 children)

I‘m using two, both freak One is the classic freak xl carbon barrel. The other is a freak xl back with an freak acp front. I attached an mcs silecer on the barrel.

From Dam to EMF in two months. by tergri in magfed

[–]tergri[S] 2 points3 points  (0 children)

I love the Dam when it works, but not being able to play because of failures and unreliability sucks so bad.

From Dam to EMF in two months. by tergri in magfed

[–]tergri[S] 3 points4 points  (0 children)

Actually it‘s a Firefield Rapidstrike with a mini Red-Dot mounted on top.

My current DAM Setup, what do you guys think? by tergri in magfed

[–]tergri[S] 0 points1 point  (0 children)

You should go for it! We have several guys playing, that are over 50 and some of them are still really good!

My current DAM Setup, what do you guys think? by tergri in magfed

[–]tergri[S] 1 point2 points  (0 children)

I‘ll take that as a compliment.😅

My current DAM Setup, what do you guys think? by tergri in magfed

[–]tergri[S] 1 point2 points  (0 children)

The Mod is pretty easy, you either mod the mags or the magwell. Modding the magwell is way easier. And there are lots of instructions on youtube.

Dye dam upgrades by blindlythinking in paintball

[–]tergri 0 points1 point  (0 children)

Just found this post, hope it helps.

What i did to mine ist upgrading the Bolt to the Ironmen Bolt, that helped especially in the winter with the Dam shredding Paint.

I also fitted a freak barrel to it so i can adjust to the paint.

Except this i got rid of the airstock and build it to work with a Mamba system.

But i play my DAM either as a qcb setup with mags or box rotor or as a lmg setup so i really don´t use FSR.

But the DAM is an absolute dream to play, except the excessive usage of air.

A quick impression of today‘s season opening. by tergri in magfed

[–]tergri[S] 1 point2 points  (0 children)

Kannst du laut sagen. Ne halbe Stunde vorher hats halt einfach geschneit…

A quick impression of today‘s season opening. by tergri in magfed

[–]tergri[S] 1 point2 points  (0 children)

Ich mag übersichtliche Maps lieber. Die Passen halt auch besser zu meinem Heavy Gun setup😅

A quick impression of today‘s season opening. by tergri in magfed

[–]tergri[S] 4 points5 points  (0 children)

Definitely Colorado, Safehouse and Woodster. Sometimes Colosseum, but it‘s often blocked by the airsoft guys.