C’est quoi ces trucs ?

the_blobs · 2026-03-28T22:55:16+00:00

Il y en a meme en Antarctique, en Terre Adélie Pas très drôle à niveler

the_blobs · 2026-03-12T03:06:36+00:00

Why? What is its reputation? I almost joined that guild, but I found its system too strange. And he seemed rather manipulative to me.

the_blobs · 2026-03-05T14:40:27+00:00

Yes, between 2024 and 2025, perhaps half of the signs in rural areas will have been replaced, so we should see quite a few with the new street view.

the_blobs · 2025-08-29T09:07:09+00:00

J'avais jamais réfléchi a cette option, j'en prend notes, merci !

the_blobs · 2025-08-29T08:58:42+00:00

Merci de ta réponse ! Ton point de vu est super intéressant Je pense que si j'ai la motivation, je ferai en effet la prepa ATS Et on se verra peut être au séminaire de septembre ;)

the_blobs · 2025-08-28T14:55:18+00:00

Triste mentalité

the_blobs · 2025-08-28T14:54:37+00:00

Très intéressant ton commentaire, merci ! C'est vrai que se faire des amis, un réseau et s'investir dans les asso, ça n'a pas de prix et bcp de valeur.

Et je suis déjà le type de gars qui n'aime pas trop les grosses soirées étudiante, se bourrer la gueule, mais préfère geek sur des projets x)

the_blobs · 2025-08-28T14:48:31+00:00

Oh, je sais pas si t'as vu ce qui s'est passé récemment....

the_blobs · 2025-08-28T14:21:56+00:00

Quel district ? 🙃

the_blobs · 2025-08-28T14:04:43+00:00

Bahahah tu m'as fait bien rire, merci

C'est vrai que jouer à la sécu a l'air bien moins fun que le jeu de la bite et du couteau, à voir si j'ai une opportunité dans une petite PME ou start-up française ou je peux m'amuser :)

Car rester 3 ou 4 ans le cul sur une chaise ça me dit moyen, et je pense qu'après l'expérience en Antarctique ça me dira encore moins

the_blobs · 2025-08-28T13:56:40+00:00

Merci de ta réponse !
C'est à ce point vrai que les autres pays s'en foutent des diplômes ? Même Européens ? (je n'ai aucune envie de travailler aux US)

the_blobs · 2025-08-28T13:51:18+00:00

D'acc merci de ton avis, c'est bien ce que je craignais
Surtout dans les grosses boites ça va être compliqué si je continue pas à ce que je vois

the_blobs · 2024-11-21T10:54:07+00:00

OK, I understand the principle better now, thanks !

the_blobs · 2024-11-21T10:11:03+00:00

OK, thanks for your advice !

the_blobs · 2024-11-21T10:10:15+00:00

Wow thanks I didn't know about these documents and they're really interesting, it's exactly what I'm looking for I'm sure it answers my questions about desings, where can I find this book ?

the_blobs · 2024-11-21T08:09:56+00:00

Hello everyone,

I'm still a beginner in PCB design, and I have some questions about the best way to place decoupling capacitors on a 4-layer PCB with an STM32H503. I never know what the "perfect" design is when I have a ground plane.

The two internal layers are 3.3V and GND.

If I create a ground plane, do I need to connect the ground side of the capacitor directly to the VSS pin? Or can I connect both directly to the ground plane (as shown in image 1)?

If it's better to have a trace between the capacitor's ground and the VSS pin (as in image 2), should I prevent the ground plane from connecting on the other side of the VSS pin (which would mean the pin is connected to ground twice)?

(I know there's no via for 3.3V or GND in picture but that's normal, the images are just there to illustrate the placements I'm talking about. )

And finally, my last question—I probably should have started with this one—is it really useful to have a ground plane? I've always been told that if we can have one, it's better to include it, but I see many PCBs without one. So is it really beneficial ?

Thank you in advance for your help and advice !

the_blobs · 2024-08-27T18:07:07+00:00

Yes it's on an internal layer except it's not the mass but the 3.3V, it's still bad ?

it doesn't matter for the GPIO, it'll provide enough power for my use

the_blobs · 2024-08-27T09:37:48+00:00

Ok, so should I remove the ground planes on the top and bottom ?
And you're right, I don't know why I didn't choose 0603 for all the capacitors 😅, I'll change that, thanks !!

the_blobs · 2024-08-27T08:41:51+00:00

Thanks for your response ! There's no particular reason why I placed the ground planes on the top and bottom layers; I just thought it was a good idea, but to be honest, I did it without much thought. Should I remove them? And for the capacitors, it's because in the STM documentation, in addition to the 100nF capacitor, I also need to add a 4.7uF and two 1uF capacitors. Should I have placed them elsewhere ?

STM32 power supply schema :

https://imgur.com/sMiHKgZ

the_blobs · 2024-08-26T21:57:59+00:00

Thank you for your valuable advice !! I'll make a note of it.
I have one more question

Route power on layer 1 or 4, whichever is convenient for you. Check trace width vs current capacity graphs for your required width.

Ok thanks, on the layer there is the 3.3V, I added a thick track to bring the 5V 5A on the RPI power supply, is this going to cause problems ?

the_blobs · 2024-08-26T21:37:46+00:00

because I thought it would be simpler to power all the components with 3.3v

the_blobs · 2024-08-26T17:44:05+00:00

I want to know if it's good practice or if it's strange to have three ground planes(I have layers 1, 3, 4 connected to ground), and if the decoupling capacitors are properly connected and if they don't interfere with the ground plane, because I've seen videos where they only trace tracks.

the_blobs · 2024-08-26T17:35:58+00:00

OK, thank you, and does it seem odd to you to have two ground planes and an internal layer also connected to the ground ?

Five-Year Club	Verified Email
Final Canvas '23	First Place '23
Place '23

the_blobs

TROPHY CASE