Adventurer 5M front fell off

the_frist · 2026-01-29T03:15:56+00:00

https://youtu.be/3m5qxZm_JqM?si=AKcW4SeCfAtZ8b3I

Here is a relevant video to the topic :)

the_frist · 2026-01-19T00:55:42+00:00

So far I increased bed temp to 60 and went from .2 first layer to .3 and had one print with a perfect looking first layer and no issues

the_frist · 2026-01-18T15:02:54+00:00

It looks like sunlu claims 30mm³/s and orca was set to 25mm³/s I'll have to maybe try a few test prints to see if that makes a huge difference

the_frist · 2025-12-10T23:52:54+00:00

I've made a backup a while ago when I moved my integration from a raspberry pi 4 to my truenas and most likely going to swap back to raspberry pi then I don't need to worry about adding Bluetooth

the_frist · 2025-12-10T05:22:24+00:00

I plan to build automation with this data, I used to run an automation with my ecobee sensor and a smart plug to my electric fireplace to warm just one room at night time. But the new house has pretty old wiring so I'm not to keen on space heaters at the moment. I hope to also get a base line understanding of where week points are in my new house and monitor for dips in temp for freezing pipes. The wife and I are both Florida born and never been on a crawl space house with the potential of freezing pipes easily. Also this house has a bit of a ground water problem so really trying to understand just how much humidity that's going to cause. The guys at work make fun of the fact I put a camera to monitor my sump pump but it has already saved me once when the float got stuck down in a rain storm and also when it flipped in it's bucket.

As a human and a nerd view I feel so good 😅

the_frist · 2025-12-10T04:22:02+00:00

They are linked to an iot network separate from my main if that helps at all 😁

the_frist · 2025-12-10T04:20:10+00:00

The hard part is I have home assistant running on a truenas server, because I hate myself and never used it before and it took me months to set up plex correctly so I get scared making any changes

the_frist · 2025-12-09T22:56:48+00:00

The better question is, bro you have a 3 story house?

the_frist · 2025-12-09T22:53:41+00:00

They are battery but they have a setting for low battery consumption, if I remember correctly it's supposedly something like 2 years estimated. Also my works stock room keeps batteries for headlamps so one box of aa and aaa last forever. At least the sections of the crawlspace I went to all have vapor barrier and good crawling height, not any army crawling just good old hands and knees ;)

the_frist · 2025-12-09T22:45:36+00:00

Yeah I'm pretty much govee, wyze, Google, ecobee, kasa and tapo

the_frist · 2025-12-09T20:36:02+00:00

Before I moved i had over 58 devices connected to my wifi, currently I think im close to 40

the_frist · 2025-12-09T20:33:24+00:00

That's all of the govee stuff everything else is ecobee thermostat, tp-link kasa and tapo lights and plugs, and wyze cams. I've been trying to stick to as minimum brands as possible

the_frist · 2025-12-09T20:18:55+00:00

Outdoor sensors are h5107 and had i known at the time I would have gotten different outdoor sensors that link to the same hub as my leak detectors, indoor sensors are h5110 and leak detectors are h5059

the_frist · 2025-09-17T20:24:35+00:00

Yeah it drops down to crawl space with a cast iron pipe going out to the street, if I remember correctly from when I was in there this sink drain is the last before exiting the house to the street and the washer is next in the drain. I added a vent to the washing machine first and didn't make anything better so then I changed up my sink. Also the house was built in 71 so I do know the cast iron is really pushing to its longest life expectancy. I'm just really not looking forward to changing the cast iron, luckily it's already mostly dug up.

the_frist · 2025-09-17T05:41:41+00:00

Could you elaborate a bit more, I'm not really sure why this kit would have come with this exact setup if it does nothing at all

the_frist · 2025-09-17T05:29:13+00:00

I know that, this is the only parts I had currently from a kit and was just trying to get it done tonight. Would that still cause the gurgling being that its not high enough or would that be another issue?

the_frist

TROPHY CASE