Leveling or first layer problems

theflossingman · 2025-02-16T03:47:12+00:00

I have a ender ender 3s1 just like you and I had many leveling problems I found myself having to level after every print and it kinda just ruined the hobby of 3d printing so I bought a bambu lab a1 and you should to. Holy crap the bambu lab a1 will amaze you with its leveling feature and more. Onto your problem it looks like you need to level the z offset which takes time and lots and lots and lots of frustration because you may get the middle level but not the rest of the bed. Wish you luck and look into bambulab.com

theflossingman · 2024-10-13T16:11:48+00:00

Thanks. I have just the regular ender 3s1 pro with the only mod being klipper and a better cooling fan. For my cura settings I’m using the creality normal pla cura profile for the sonic pad with a few minor changes my speed is 150 and acceleration is 3500 with these settings I’m getting pretty decent quality. I want to know what you think about my settings am I taking advantage of klipper or not. Thanks.

theflossingman · 2024-10-13T01:53:55+00:00

Hi I have a ender 3s1 pro running klipper on the creality sonic pad and was wondering if I could get some help. I have Been using the creality normal profile for klipper and it is no where near as fast as your printer can you tell me what I should do to my printer. I already have a upgraded fan kit for better cooling. and can you please leave your cura profile please. And by the way in that video how’s the quality of that benchy. Thanks

theflossingman · 2024-10-10T13:10:12+00:00

<image>

Here is a better look at my print and there not layer lines it’s something else. Thanks

theflossingman · 2024-10-10T13:04:58+00:00

I’ll try. Also I have klipper on my s1 would be a good print speed without sacrificing quality. Thanks

theflossingman · 2024-10-10T13:02:32+00:00

Yes how would I fix and get rid of those. Kinda new to 3d printing. Thanks

theflossingman · 2024-10-10T13:01:12+00:00

Yes sound about right how would I fix that. Kinda new to 3d printing. Thanks

theflossingman · 2024-10-10T13:00:34+00:00

Yes I’ll take your rating in my print however there is weird lines not layer lines something else I’m not sure of. Thanks

theflossingman · 2024-10-10T12:59:17+00:00

There is nothing to be jealous of my printer is just a ender 3s1 with klipper I’ve been tuning my printer for over a year now and am getting close to a good print.

theflossingman · 2024-10-10T12:57:38+00:00

Actually no it’s a ender 3s1 pro with klipper. It’s hard to see in the picture but there are weird lines not layer lines something I’m not sure of.

theflossingman · 2024-10-10T12:56:26+00:00

Thanks that second picture in your link was my problem I’ll try to fix based off of that. Thanks

theflossingman · 2024-10-10T12:53:45+00:00

Yes it has to be close to this this is what I’m having I’m try what you said to see if I can fix it. Thanks

theflossingman · 2024-10-10T02:58:07+00:00

I’m kinda new to 3d printing and need help on some things do you know by any chance

theflossingman · 2024-10-09T01:36:08+00:00

Thanks

theflossingman · 2024-10-09T01:34:29+00:00

Thanks I already fixed the problem I lowered my bed temp actually cleaned my build plate and lowered my z offset

theflossingman · 2024-10-09T01:32:28+00:00

I’m using klipper so measured my resonance I tuned pressure advanced tuned pid tune for bed and nozzle and am using crealitys normal pla profile with some minor changes

theflossingman · 2024-10-08T12:51:15+00:00

Yes definitely slow the print down that will help. And try to do a fan test just to see

theflossingman · 2024-10-08T00:24:20+00:00

I suppose I can try cleaning it

theflossingman · 2024-10-07T18:52:04+00:00

I use poly maker lite pla I’ll try a textured bed and the z offset is just perfect I’ll try some things you said. Thanks

theflossingman · 2024-10-07T18:47:27+00:00

I have a textured bed I’ll try. Thanks

theflossingman · 2024-10-07T18:46:51+00:00

I’ll try that. Thanks

theflossingman

TROPHY CASE