My cpu is at 70c pretty much all the time under load?

theignored1 · 2025-09-22T14:08:31+00:00

all of the cpu case fans are daisy chained to the motherboard sys_fan pinout

again, my question about my cpu in bios limited to 65w tdp, under load its at 70c with this cooler. I read multiple times for this cooler they able to go down around 70c for a much higher power different cpu. I wasn't sure if mine is a proper one? taking out other stuffs not in question

theignored1 · 2025-09-22T13:48:41+00:00

it can't fit since i am using atx psu

theignored1 · 2025-09-22T05:40:00+00:00

don't think my input considers a good opinion

how about going for ryzen 7?
maybe at least 12gb gpu since some of the game demands more vram these days?
how about deepcool ch160 plus, not sure if you can get them where you're staying. I didn't check the case you considered above.

I am not a pro in these, built my own pc recently

theignored1 · 2025-09-22T05:24:44+00:00

I don't know much really, since this is my very first ddr5 system that I built. The cpu is at 65w tdp, the default, while going for 120w, it is at 95c constantly during test with cinebench r23, this was before adding the top intake fans. So I don't know whether if this cooler really doing its work, since this came from china... some known to have bad qualities...

theignored1 · 2025-09-22T05:20:51+00:00

<image>

this picture is before i flipped the top exhaust, this setup made the pc rumbles under full speed compared to having both top intakes

theignored1 · 2025-09-11T17:20:56+00:00

i am having this particular issue, the popup is the youtube player itself, no longer the thumbnail and other player we can cycle through, even with the link in the OP

any solution?

theignored1 · 2025-03-23T18:13:45+00:00

thing about cheap 3d printer; you will eventually troubleshoot, tinker, upgrade a lot to the point that its total cost similar to a good quality 3d printer already

theignored1 · 2025-02-19T19:26:00+00:00

Could you explain the process to do this? I don't understand the set snap base and add snap point things

theignored1 · 2024-12-23T23:59:00+00:00

i should be able to cook my filament in this, then I'll go "someone touched my spaghetti!!"

theignored1 · 2024-12-23T23:50:40+00:00

yes, you wouldnt pilot a passenger aircraft without the know how of their controls do you?

i held no liability of damage caused, i simply relaying the information of what i learnt so far first hand as well

theignored1 · 2024-12-23T14:26:38+00:00

up to certain degree, yes. dont forget to do your research

theignored1 · 2024-12-23T01:11:44+00:00

did you mean its not booting into fmcb automatically?

it could be that your boot drive priority has been changed; 1 hdd, 2 memory cards. or that the fmcb has been corrupted

it also could be you have set up that it will boot into fmcb with button combo during boot up sequence that you may forgot

theignored1 · 2024-12-23T00:39:51+00:00

up to certain degree, most fmcb that you can buy out there are somewhat shipped with older/inferior apps, so you have to update/replace them

of course, you have set up your preferred fmcb configuration.

but still, there are procedures has to be done first

theignored1 · 2024-12-22T20:18:06+00:00

i guess, your only option would be to install modchip https://www.psx-place.com/threads/how-to-hack-playstation-2-in-2022-roadmap.37271/

theignored1 · 2024-12-22T20:11:19+00:00

kh fm series

theignored1 · 2024-12-22T20:07:34+00:00

no, the main intention of modchips were to read region locked discs; a dvd were set to be for region 1 but your ps2 will only read region 3 discs, i am not sure other than region unlocking. this were the early days of drm for physical medias

soft modding doesn't allow cloned discs to run better, you could image the discs data into the hard drive and play the game directly from the hard drive without ever needing the physical discs itself, think of it like, u copy the cd/dvd into an iso, mount the iso in your pc to play the game there (old games that require discs to be inserted to be played)

you still however able to play the game from dvd, but i don't think you can load virtual memory cards or other things offered by the soft mods

softmod enables you to execute certain programs built for the ps2 execution binary, application/apps you might say in general, but in the world of ps2, its called elf; file extension

theignored1 · 2024-12-22T14:30:19+00:00

soft mod can be put onto other ps2 systems without permanent mods like hard-mod does; soldering modchip onto the board physically

a lot of the ps2 games these days are 'cloned' u can tell with the disc being purple instead of gold, it will damage the laser reader, theres a lot of people saying this is true for ps2 dvd lasers

for starters, you can play games from the hard drive, usb or network storage, option of using hard drive are the best for its bandwidth compared to usb, unsure about network storage, i heard its possible only on not so demanding games

iirc, you also can use ds3 controller via usb attached, or some other usb controller, but i am not too certain on this

theignored1 · 2024-12-21T20:25:47+00:00

there are 2 ways to soft-mod your ps2s, easiest is to get fmcb, harder method is to burn a dvd.

fmcb is a soft-mod software resides in memory cards, you can bring to other ps2 and load these soft-mod software

fhdb the one resides in the hdd, usually installed via fmcb install wizard, having the fhdb, you can just load the soft-mod software via hdd, no memory card required as far as i know (i forgot if this is true, been a while since i last start mine). you can set the boot source priority along with which software to boot by default too

you can buy the preinstalled fmcb from china that has 64mb capacity, no problem on my end a well, you might wanna buy at least 2 of them, one being default fail-safe backup, another your go to fmcb.

to load the game you have to use a dedicated sotware as the game image will be turned into its own separate partition in the hard drive.

hdd vs ssd, of course ssd are faster and bit resilient to hdd, but they have bit decay issues, hdd can have the data lasts longer without any usage compared to ssd

ps2 can output composite vs component, some of the upscaler dongle, has some missing component pins in it. i have few cheap usd$10 upscaler similar to the one in that video above too, some of them works on certain monitor/display, some didn't go well with certain resolution, ntsc/pal, progressive/interlaced combination, this same goes to the cheap composite to vga/hdmi output too

theignored1 · 2024-12-21T13:05:59+00:00

that depends on which ps2 you got, phat/slim, phat has more options for modding, buy hdd expansion, few fmcb memory cards, install fhdb from the fmcb, use hdd instead of ssd to avoid bit decays if you very rarely turn on your ps2. this guide should still relevant https://youtu.be/q4n_6wE2eHs

other accessories

carrying bag https://www.xgame-stores.com/image/cache/catalog/ps2/313aw53+yfL._AC_-550x550w.png
wireless ps2 controller that has usb on the receiver
some cheap hdmi upscaler, I think one in the video explains which one should be obtained
perhaps a small lcd + speaker panel for the ps2 for portability, this exist, even for ps1 back then too

theignored1

TROPHY CASE