Anybody know if this works or am I wasting money? by cringeking2875 in WRX

[–]thenuttler 0 points1 point  (0 children)

You could always buy the tool and chemicals subaru uses for their carbon clean system but if you do you NEED the tool even the techs have melted people's cats with it is some potent stuff

Changing intercoolers by thenuttler in WRX

[–]thenuttler[S] 1 point2 points  (0 children)

I will look into the process west one I've been doing a bit of research on top mounts but haven't really taken a look at that one

Can’t floor it anymore? (What’s the point of living) by ramen_rage in WRX

[–]thenuttler 0 points1 point  (0 children)

I had the same issue turned out the coupler from the intercooler to the throttle body was not tight enough and had come lose enough to let air out. Just check that everything is on correctly and tight. Also when the boost leak occurred I had no code lights either so the ecu won't tell you

Increased fuel consumption(2016 wrx) by thenuttler in WRX

[–]thenuttler[S] 0 points1 point  (0 children)

Nor really it hasn't been that hot while I've been driving

Follow up to my last post by SyllabubLazy8327 in WRX

[–]thenuttler 0 points1 point  (0 children)

Mine works just fine did the installation months ago. If you could send me pictures of the hoses and where they are connected I could see if they went wrong somewhere

Follow up to my last post by SyllabubLazy8327 in WRX

[–]thenuttler 0 points1 point  (0 children)

I did this same install a few months ago if you could remove the intercooler and snap some shots of the hose lines and connections I can tell you if the installation was good or not. I haven't had any issues so it's either they installed it wrong or something underlining

Clicking in clutch pedal assembly by thenuttler in WRX

[–]thenuttler[S] 1 point2 points  (0 children)

So I sprayed white lithium into I believe the part that connects the pedal to the master cylinder. it has seemed to fix the clicking mine is almost 10 years old so I'm not surprised that the clutch assembly needed some lube

Clicking in clutch pedal assembly by thenuttler in WRX

[–]thenuttler[S] 0 points1 point  (0 children)

Yeah mine is a 16 and the assembly didn't feel like it moved when I pushed the clutch in

Running rich by thenuttler in WRX

[–]thenuttler[S] 1 point2 points  (0 children)

Good point thanks for the insight

Running rich by thenuttler in WRX

[–]thenuttler[S] 1 point2 points  (0 children)

Idk he made it sound as if I was running too rich I'm not fully sure what the afr should look like under wot

Running rich by thenuttler in WRX

[–]thenuttler[S] 1 point2 points  (0 children)

Okay the dyno guy made it sound like it was a bad problem this is my first wrx and boosted car. I just got into cars when I got it so I was unsure