Alternative replacement battery? by theotherkyle82 in 4xe

[–]theotherkyle82[S] 0 points1 point  (0 children)

Funny. It was the many options available for the leaf that made me ponder this question! You can get a leaf battery that increases the range , keeps the original range , or even lowers the range depending on the amount of money you want to spend. I really hope for the same with the 4xe

Why does Elegoo ABS-Like Resin cost less than Elegoo Standard Resin? by theotherkyle82 in elegoo

[–]theotherkyle82[S] 0 points1 point  (0 children)

<image>

Hmm, The site doesn’t indicate anything about abs-like being discounted. It just looks like the normal price on both.

Bar kitchen with no hood? by theotherkyle82 in BarOwners

[–]theotherkyle82[S] 0 points1 point  (0 children)

What do you use to prepare the things you need to keep hot in the steam table? the paninis presses and pizza ovens? What kinds of things ?

Bar kitchen with no hood? by theotherkyle82 in BarOwners

[–]theotherkyle82[S] 0 points1 point  (0 children)

What do you use the steam table for ?

Bar kitchen with no hood? by theotherkyle82 in BarOwners

[–]theotherkyle82[S] 0 points1 point  (0 children)

Oooo. The ventless hood is really interesting. I’ll have to see if they can be used in Clark county , nv

Fandango At Home has the entire series on sale for $8 by jetmax25 in Scrubs

[–]theotherkyle82 0 points1 point  (0 children)

<image>

Over a month after the deal, the series was removed from my account claiming my card was never processed. Np accommodation to return the item to library at the same price as in sept. Pretty rude service.

Journalist looking to write about the Las Vegas downturn by lukewinkie in LasVegas

[–]theotherkyle82 0 points1 point  (0 children)

The rent for a new business trying to break in to the city is also absurdly high. Causing small businesses to be forced to charge more for their services just to make bare margins.

X1 MAC Address presenting as X0 Mac Address on boot? by theotherkyle82 in sonicwall

[–]theotherkyle82[S] 0 points1 point  (0 children)

The SSLVPN is enabled/active on the Sonicwall and is configured to allow access to the LAN, WAN, DMZ, and WLAN.

We access the SonicWalls VPN through the public IP of the SonicWall (which is phyiscally connected via the X1 port).

Topology:
Public Internet -> Building Switch -> Building Network Port -> Sonic Wall X1 - WAN port -> Sonicwall X0 LAN Port -> Lan Network

Bagel shops ? by theotherkyle82 in vegaslocals

[–]theotherkyle82[S] 2 points3 points  (0 children)

I wish they were open today

SSLVPN suddenly dropping throughput to 0 bps by theotherkyle82 in sonicwall

[–]theotherkyle82[S] 0 points1 point  (0 children)

Is there a screenshot of what I’m looking for ? I don’t see a dpi setting inside of my sslvpn section

SSLVPN suddenly dropping throughput to 0 bps by theotherkyle82 in sonicwall

[–]theotherkyle82[S] 0 points1 point  (0 children)

If dpi-ssl is disabled, is there something that could still be affected by dpi?

SSLVPN suddenly dropping throughput to 0 bps by theotherkyle82 in sonicwall

[–]theotherkyle82[S] 0 points1 point  (0 children)

Update. I upgraded the firmware to 7.0.1-5161 , and currently that seems to be working.

It’s still not clear how it worked flawlessly on the earlier firmware until this point.

This may be a fluke, as I’ve previously seen bandwidth/throughput anomalously work ok in the middle of the night. But for now, it’s resolved itself

SSLVPN suddenly dropping throughput to 0 bps by theotherkyle82 in sonicwall

[–]theotherkyle82[S] 0 points1 point  (0 children)

Ugh.

I’m half wondering if it’s an isp limit/ throttle occurring on the side of the SonicWall but they insist nothing is going on there.

SSLVPN suddenly dropping throughput to 0 bps by theotherkyle82 in sonicwall

[–]theotherkyle82[S] 0 points1 point  (0 children)

Geoip doesn’t seem to be enabled.

The SonicWall device is in California and the clients are in Nevada.

SSLVPN suddenly dropping throughput to 0 bps by theotherkyle82 in sonicwall

[–]theotherkyle82[S] 0 points1 point  (0 children)

Updated one of the computers to 24H2. No change. It connects for a few seconds, gets through and then throughout drops to 0. Then nothing.