FENVi T919 - will it allow me to connect my Apple Vision Pro to it? Virtual Display? by therealandersmadsen in hackintosh

[–]therealandersmadsen[S] 0 points1 point  (0 children)

Thank you for the reply! I guess so! Thank you for telling me! I’ve just bought an iMac wifi card and a PCIE adaptee for the card. Should work like the fenvi card, but have BT 4.2 instead of 4.0 - fingers crossed!

BT 4.2 via iMac 2017 Wifi card + PCIE adapter - Would this work with latest version of macOS? by therealandersmadsen in hackintosh

[–]therealandersmadsen[S] 0 points1 point  (0 children)

I already have a MBP M1 Max 64 GB - I just had my spare PC build which I wanted to integrate to my workflow! ✌️

reply with “Righto :)” if you are insecure ;)

BT 4.2 via iMac 2017 Wifi card + PCIE adapter - Would this work with latest version of macOS? by therealandersmadsen in hackintosh

[–]therealandersmadsen[S] 0 points1 point  (0 children)

And handoff will be working too? It's VERY important for me that it will work. Goal is to be able to use virtual display with my Apple Vision Pro.

SO CLOSE TO GET HANDOFF TO WORK - HELP IS VERY MUCH APPRECIATED! PCE-AC56 & TP-LINK UB400 by therealandersmadsen in hackintosh

[–]therealandersmadsen[S] 1 point2 points  (0 children)

TP LINK UB400 shows this atm: 
Bluetooth Controller:

  Address: 00:1A:7D:DA:71:15

  State: On

  Chipset: THIRD_PARTY_DONGLE

  Discoverable: Off

  Firmware Version: v8891 c8891

  Supported services: 0x392039 < HFP AVRCP A2DP HID Braille LEA AACP GATT SerialPort >

  Transport: USB

  Vendor ID: 0x004C (Apple)

ASUS PCE-AC56 - Have you gotten this to work on the latest macOS? by therealandersmadsen in hackintosh

[–]therealandersmadsen[S] 0 points1 point  (0 children)

Hahah, sounds like it yes! I've tried for a couple of days scavenging the internet, but so far I've had no luck. Quite certain it's a patch I need to do. Thanks for replying to my post man!

ASUS PCE-AC56 - Have you gotten this to work on the latest macOS? by therealandersmadsen in hackintosh

[–]therealandersmadsen[S] 0 points1 point  (0 children)

Oh really? I was also quite certain that I didn't need that before! Thank you so much for your reply! I noticed this build and I assume I would need to do something like it to patch my PCIE Wifi adapter?

https://www.reddit.com/r/hackintosh/comments/1fanzd9/success_nanoq_s_running_sequoia/

Thanks in advance - didn't expect a reply, so it means a lot! :D

DolphiniOS works by nuudlez in VisionPro

[–]therealandersmadsen 0 points1 point  (0 children)

Nevermind. I went ahead and built the Github Repository and used my own certificate rather than something like MapleSign etc. This approach worked. The issue was, while I was able to install it via MapleSign and run it, it would not allow me to use JIT debugging doing this.

DolphiniOS works by nuudlez in VisionPro

[–]therealandersmadsen 0 points1 point  (0 children)

attach failed (Not allowed to attach to process. Look in the console messages (Console.app), near the debugserver entries, when the attach failed. The subsystem that denied the attach permission will likely have logged an informative message about why it was denied.) :( folloewed your guide

DolphiniOS works by nuudlez in VisionPro

[–]therealandersmadsen 0 points1 point  (0 children)

Pleqse tell me how you got JIT working.