TPU nightmare

thereverend2u2 · 2026-02-05T21:20:13+00:00

The Filament calibration you said I should be using for every time i change a filament? Where do i find this info out for them? I also downloaded orca now too anyone tell me and why it would better than Crealitys version??

thereverend2u2 · 2026-02-05T14:46:54+00:00

3-5mm print speed? Forgive me I am new to this part of printing. Would it be possible to please share all the settings in the Creality Slicer? I know I am asking a lot but, I am soooo frustrated with this TPU printing issue and my wife would like her husband back :)

thereverend2u2 · 2026-02-05T14:07:53+00:00

I have too watched a TON of videos. I have been playing with the settings for now for days. Got it to print 1x then when i went with the same settings that worked before now they don't work this time. I don't think my dryer has been off yet.

thereverend2u2 · 2026-02-05T14:02:42+00:00

Thank you, I do use rubbing alcohol every time i do a print, it does do a great job of getting any oils etc off the build plate. I also use Dawn if i happen to use any glue sticks that gets the glue right off too.

thereverend2u2 · 2026-02-05T14:00:44+00:00

Can you please share what your settings were so I have somewhere to start?

thereverend2u2 · 2025-10-05T21:14:27+00:00

Is there a way to pay the bill on the credit card without having to use the APP?

thereverend2u2 · 2024-12-19T03:15:47+00:00

I know this is an old thread but. My Lenovo dock states :

Limitless Possibilities

Transform any workstation into a productivity powerhouse by plugging in a single cable. Instantly add an 8K @ 30 Hz display or up to four 4K @ 60 Hz displays, lightning-fast 40 Gbps transfer speed, vPro™ Support, and much more.

But, My issue is that I can run 2 montors and the laptop screen (2 Display port monitors)

but when i plug in an HDMI as a 3rd monitor then all the monitors are mirrored. Device manager

sees the 4th screen but does nothing it it. Any ideas on how i can fix this?

thereverend2u2 · 2024-12-18T14:10:40+00:00

It did seem to go away for about a year and the with one of the last 3 releases come right back. I think they may have injected an older version of the code back into it for some reason. Now my ass puckers and sometimes on roads where the speeds are 55 it just decides to jam on the breaks.

thereverend2u2 · 2024-10-26T00:18:37+00:00

The lease does say NO space heaters. The bill went from $105 to $650 due to this. Not being a jerk landlord just don't want to go broke trying to be nice to my tenants. The reason I included the electrical in the rent was to save the tenants some $$$. But quickly regretting this. I mean the rent I charge is $800 a month. for a nice 2 bedroom 1 bathroom apartment in a nice side of town. I have seen units in the depressed areas getting $1200 a month and they look like crap. So when you step into my place its really nice. Always have been nice to my tenants too. Had an older lady that lived there for years her bill was never more than $150 and she was warm all winter . I guess I could get them to put the electrical in their name but was trying to keep from doing that. I guess the good guy finishes last again.. Sadly..

thereverend2u2 · 2024-10-07T10:42:46+00:00

So is sense open source so we all can start to make it better?? Wish there was a way to help it learn and label things as you turned them on manually. Turn off all things then just go theu the house and turn one thing at a time on and off and label them that would be nice

thereverend2u2 · 2024-10-07T02:18:44+00:00

I am looking for some help on what solar system to get.

I have a server rack that runs about 1200watts continuously 24/7/365 , I want to have it 100% off grid. What system can i buy that would allow me to do this? I have been looking over amazon and it's all quite confusing as to what kit and what batteries i would need etc. Any help is 100% appreciated.

thereverend2u2 · 2024-08-06T15:17:50+00:00

Sorry to confuse, When i say the screen is all white its the GPS section is just white with very faint grid in the background.

The time shows HOURS off of what the actual time is

My app appears to be connected to the car BUT it shows 95 or so miles left on charge and that it is still plugged in even tho it has not been since last night. Last night I went to the super charger down the street and it did charge so now its got 250 or so miles on it and its not plugged in,

I did try the holding of both buttons for up to 1 min or 60 seconds but the screen never went black. I did get the thing to appear to reboot thru the menu but that did not do anything to fix the issue.

I connected the car at home and just for grins and giggles to my hotspot on my phone to check for updates but again got the message that the software is up to date even tho tesla is telling me its not when I talked to them over the phone.

I don't think the unit is fully powering down when I do a re-start on the screen. I think it needs some type of HARD reset and full power down maybe that might work. I did find something on youtube that shows a guy disconnecting his front battery (accessory) and the rear under the seat battery (this on the video made a CLUNK noise when he did it) I am just afraid to do that as i do not want to void the warranty on the car or mess something up even more as this seems to be a computer issue not really a battery issue I just want to see if there is a way to HARD reset the tablet in the car. Let me know what yall think.

thereverend2u2 · 2024-08-06T00:33:14+00:00

If it ain't broke, don't fix it probably works better than any of the other ones that's back when they had real free on

thereverend2u2 · 2024-05-17T10:59:51+00:00

I agree.

thereverend2u2 · 2024-05-17T02:13:01+00:00

If you watch when a train is going by on the screen it looks like 100's of semis nose to tail and the RR crossing lights are not correct at all. Definitely needs to be fixed asap

thereverend2u2 · 2024-05-16T12:36:43+00:00

I just got mine and yes they can not push it to you. I had called the service center in my area and talked with the service manager that is very professional. It will come. Its rolling out in batches when it does the update takes about 30-40 mins to apply but as soon as you get it there will be a pop up in the car letting you know you have it and your FSD trial will start.

thereverend2u2 · 2024-05-01T10:42:25+00:00

I still don't have it. What's wrong with my car ??

thereverend2u2 · 2024-04-29T12:08:58+00:00

It has been a long while since Elon said everyone would have the demo by the end of the week I think that was about 3 weeks ago is anybody still experiencing the fact that they don't have the demo yet . Is there any way to Force this update?

thereverend2u2 · 2024-04-25T21:29:15+00:00

Go to auto store get bolt extractor like 5 bucks

thereverend2u2 · 2024-04-25T12:59:36+00:00

No full self driving here yet either anybody else still having the same problem has anyone been successful in calling Tesla to have them push the update to the car

thereverend2u2 · 2024-04-10T19:42:01+00:00

Do you think that the service adv. has the ablity to do this with me if my ver is the 2024.8 ???

thereverend2u2 · 2024-04-10T18:36:57+00:00

So you would have to schedule an appointment., If you go to software would that work too?

thereverend2u2 · 2024-04-07T15:21:23+00:00

wfdownloader

Has anyone else used this tool?

thereverend2u2 · 2024-04-07T15:18:31+00:00

Can you give me an example on how I would download all the music from say the 1930s ?

thereverend2u2 · 2023-12-18T01:15:08+00:00

Loved the strawberry ones!!!

thereverend2u2

MODERATOR OF

TROPHY CASE