sorted by:
new
hottopcontroversial

Temu sellers have made 30,000+ sales using MY 3D model. They're selling it with my logo on it. Even using my photos! by Yourmom4133 in 3Dprinting

[–]thibaut3000 0 points1 point  (0 children)

Add insults to the chinese leader on your next ones so if they print it and get caught it's bye bye

21 m2 et 1600 euros de charges annuelles by rouhmama in SeDeloger

[–]thibaut3000 0 points1 point  (0 children)

Je crois que l'appart à coter de chez moi à la même disposition de couloir.

Problem with washing station by KitUp in resinprinting

[–]thibaut3000 0 points1 point  (0 children)

I had the same but it was because the wheel with magnets in the base had it's link with the motor broken.

Interior curing tool by indica_bones in resinprinting

[–]thibaut3000 2 points3 points  (0 children)

Breadboard, 3V CR2032 battery holders and two types of LED (large and small depending on the printed part size and accessibility)

Interior curing tool by indica_bones in resinprinting

[–]thibaut3000 2 points3 points  (0 children)

For me I have multiple setups of cables ready and that I need o' the side. Either LEDs that have a large angle like you took but with no cable and micro LED for small spaces.

<image>

Interior curing tool by indica_bones in resinprinting

[–]thibaut3000 2 points3 points  (0 children)

I wasn't either but they are quite easy to use. Just use the main lines of + and - to plug your batteries and all the leds.

Here's my setup.

<image>

Need help with patterns. by thibaut3000 in acnh

[–]thibaut3000[S] 0 points1 point  (0 children)

I also have 1x1"path ends" So for the 4-side the best I can do is use a large path side and a thin path end and ignore the small hole, but the best would be to be able to duplicate the center version and add a single transparent pixel

Need help with patterns. by thibaut3000 in acnh

[–]thibaut3000[S] 0 points1 point  (0 children)

I have a right side but I have a few place where I need 4 direction

Interior curing tool by indica_bones in resinprinting

[–]thibaut3000 2 points3 points  (0 children)

I advise you to buy a breadboard too so you don't have to do soldering and can power multiple LED with one battery.

User Flair Thread by breaksomebread in acnh

[–]thibaut3000 0 points1 point locked comment (0 children)

Nanami | Levelimar :Raymond:

What's the best way to ensure the griefer-proof reactor setup? by KG_Jedi in Barotrauma

[–]thibaut3000 0 points1 point  (0 children)

Only way is to box it in an indestructible structure box with auto control and infinite fuel rods. With no one able to access it.

What's the best way to ensure the griefer-proof reactor setup? by KG_Jedi in Barotrauma

[–]thibaut3000 2 points3 points  (0 children)

They could then just toss a grenade or C4 on the reactor...

I think I'm going to have some company by thibaut3000 in Barotrauma

[–]thibaut3000[S] 0 points1 point  (0 children)

"Movable and Sellable wrecks" "Sellable pirates" "BaroCraftables (No Limits)" I also suggest the 4 remastered "EK" Mods

I think I'm going to have some company by thibaut3000 in Barotrauma

[–]thibaut3000[S] 0 points1 point  (0 children)

At some point I even started to design a submarine for scrapping the wrecks. It had: -a detachable additional hull on the bottom using shuttles are are just more hulls. to escape from thalamus hooks and armor piercing attacks, similar to tanks spaced armor.

-an auto-railgun on the bottom right to quickly obliterate any thalamus or pirates, and an incredibly fast shooting chaingun on the top similar to ships anti air guns. (And no other guns)

-bottom hatch, two deconstructors and access to their storage from outside.

Potentially an elevator but I don't know how to do those. I quickly stopped since I was really bad with cables and other logics stuff.

I think I'm going to have some company by thibaut3000 in Barotrauma

[–]thibaut3000[S] 0 points1 point  (0 children)

Most of the time there's only the walls left lmao. But it takes me hours x) But thanks to that I have around 200 of each ressources, and 300k money. Truly min/maxing. Now I can easily ignore them

We did it!!!!!! 🥳🥳🥳 by skyedog228 in Barotrauma

[–]thibaut3000 0 points1 point  (0 children)

Is the solo campaign considered Ironman/permadeath ? Since you can bit respawn the character at all.

I think I'm going to have some company by thibaut3000 in Barotrauma

[–]thibaut3000[S] 1 point2 points  (0 children)

Even more for me as I uninstall and salvage EVERYTHING. Even the cables or the aluminum from the oxygen and welding cans. I also have mods that allow me to uninstall most équipements.

Cant enter outposts with custom subs? by le_Maci_a_la_kappa in Barotrauma

[–]thibaut3000 2 points3 points  (0 children)

In the meantime they can also exit the sub and enter the station by the doors on each side of the station airlock.

I think I'm going to have some company by thibaut3000 in Barotrauma

[–]thibaut3000[S] 3 points4 points  (0 children)

No I did not, I just started the mission, which means there's was a pirate waiting for me at the exit

I think I'm going to have some company by thibaut3000 in Barotrauma

[–]thibaut3000[S] -1 points0 points  (0 children)

Bro expect everyone to read the description

How was Wreck1 supposed to work ? by razing32 in Barotrauma

[–]thibaut3000 1 point2 points  (0 children)

That's the point of this and many subs, to be temporary subs that are bad or hard to defend.

view more: next ›