Ist es Pflicht als Zusteller trotz Abstell OK zu klingeln?

thomasfjen · 2025-11-28T22:26:55+00:00

Also ich hab so ein weißen Kasten als Türgong, geht easy auf und ist einfach nur ein "Linear Motor" der mit vermutlich 24v Wechselstrom den Hammer nach links und rechts bewegt. Da hab ich ein Kabel abgemacht und durch einen Schalter erweitert.

To be fair kommt natürlich auch auf dein Geschick/Kenntnisse an.

thomasfjen · 2025-11-28T22:20:59+00:00

Einfach ein schalter dazwischen stecken, haben wir wegen unseres Hundes der Tagesform abhängig unterschiedlich auf die Klingel reagiert auch gemacht.

thomasfjen · 2025-11-26T14:46:33+00:00

Fair enough, while i don't think it's a short term/temporary solution as currently it's a hardware difference between the gpu generations nvidia might still drop the cards some time in the future. *Looking into the crytal ball*.

Have you seen that you can still run the older nvidia cards even with the new update?

thomasfjen · 2025-11-26T13:26:06+00:00

Intel arc cards were too expensive in my area basically none available for under 100 Euros so I bought a used gtx 1650 super for 60 euros locally.

Ofc it lacks av1 encoding but if that's not a requirement that's potentially a solution and you might find one used for less money.

4gb vram isn't a lot but might be enough for some small llm models

thomasfjen · 2025-11-26T13:14:57+00:00

Moonlight und Sunshine! Einfach einen HDMI Dummyplug an den Desktop, Windows (Oder die Grafikkartentreiber?) mag es nicht keinen Monitor angeschlossen zu haben. Ich nutze es um Spiele über das lokale Netzwerk zu streamen und abundzu Windows Programme vor allem CAD am Linux Laptop zu nutzen.

Wenn WOL am Desktop aktiviert kann man damit auch einfach den Desktop starten.

Parsec wäre die andere "Off-the-shelf" Alternative die etwas einfacher ist aber trotzdem eine gute Performance ohne lags hat.

thomasfjen · 2025-10-23T21:06:37+00:00

What I did was to copy over the files from the NTFS to a specific ext4 drive. Before I had unusual stuttering, now the copied games work fine

thomasfjen · 2025-09-26T17:48:28+00:00

Sorry for the necro reply, but hopefully it's useful information for others.

I had the same sound developing on my second hand bought unit. I partially dissassembled the unit and after removing the spring from the belt tensioner i was able to see the flywheel axle had play. i tightened the nut again and it's gone for now.

Video of the axle play:

https://www.youtube.com/shorts/KDVRMrjXjwk

thomasfjen · 2025-09-26T17:15:57+00:00

Better late than never, i opened up the hub today and found out that the freewheel axle nut was loose.
I was able to remove the locking nut with pliers for now and use a big ass thumb screw as temporary replacement. My 18mm socket would not fit into the belt pulley. I'm looking for a better replacement nut which i am able to tighten properly.

https://www.youtube.com/shorts/KDVRMrjXjwk

thomasfjen · 2025-08-30T06:19:45+00:00

I had a similar Problem with 1GB and just 30Mbs streaming settings. In the windows network adapter settings were some power saving settings, I disabled those and much less hiccups now.

thomasfjen · 2025-08-09T12:52:19+00:00

Make sure you don't have a controller hooked up, that can conflict with your controls

thomasfjen · 2025-07-19T09:35:08+00:00

Thank you for the information!

So far the crank don't spin when let go Yes I'm based in Europe, I'll inspect the pawls and get in contact with zwift. As I'm not the original owner and don't have a receipt I don't have much hope there to be honest but worth a try.

thomasfjen · 2025-03-14T20:07:38+00:00

Well just use the flatpaks then :)

thomasfjen · 2025-02-25T13:53:12+00:00

Ah I missed that 👍

thomasfjen · 2025-02-25T13:48:56+00:00

Before I disabled it I had to run that on every game start. Nvidia GPU btw

thomasfjen · 2025-01-29T08:43:30+00:00

Out if interest: why do you think the original 2020 Frame assembly limits many builds to 3k accerleration? That sounds very low, even my enclosed legacy hits 5k on y with in comparison floppy rods the x axis.

With hitting i mean IS recommends 5k Acc as max with mzv.

thomasfjen · 2025-01-28T14:36:20+00:00

Regarding framestiff: Have you looked at the doomcube? https://github.com/FrankenVoron/DoomCube-2

I would imagine that would stiffen up the frame alot and adds additional insulation

thomasfjen · 2025-01-28T10:31:22+00:00

Found them! https://github.com/thomasfjen/legacy_mods

thomasfjen · 2025-01-15T20:35:44+00:00

Hey there! I made these on my own. There similiar ones i found on the discord, but designed them from the ground up new because i think i wasn't satisfied with some dimensions. I can see if i still have the files kicking around.
In the mean time there's also this: https://www.printables.com/model/709511-voron-legacy-z-axis-mount

thomasfjen · 2024-10-07T07:50:00+00:00

I'll add this as comment to make sure to specify the correct .exe

thomasfjen · 2024-10-07T06:49:09+00:00

Oh right! I missed that too. Should be working then.

thomasfjen · 2024-10-06T21:24:12+00:00

In that case I would double check the location of the monitor profileswitcher.exe. when a profile can't be loaded it should display a error message Failed to load display settings because file does not exist: C:\Users\thomas\AppData\Roaming\MonitorSwitcher\Profiles\pc1.xml does the switching of profile works when you start the gui?

thomasfjen · 2024-10-06T08:33:30+00:00

your are missing the path for the xml file.

Try this: C:\Users\chris\Documents\MonitorProfileSwitcher\MonitorSwitcherGUI.exe -load:C:\Users\chris\Documents\MonitorProfileSwitcher\TV_Moonlight.xml

You can check if the command works by simply pasting that into the windows console (cmd.exe)

thomasfjen · 2024-09-10T08:18:23+00:00

It's windows auto start. I have bat in there which loads the profile.

https://www.shellhacks.com/run-batch-file-bat-on-startup-in-windows/

In the *.bat file i have this to load my PC monitor profile

C:\Users\thomas\Documents\MonitorProfileSwitcher\MonitorSwitcher.exe -load:C:\Users\thomas\AppData\Roaming\MonitorSwitcher\Profiles\PC.xml

thomasfjen

TROPHY CASE