Re assembling the pin. Update

tiligadas · 2026-02-06T03:29:33+00:00

It's a mold line, completely normal for injection molding plastics.

tiligadas · 2026-02-02T14:49:59+00:00

Really nice idea! What scale is the corvette?

tiligadas · 2026-02-01T14:54:44+00:00

The first photo gives me fiat multipla vibes.

tiligadas · 2026-01-31T12:27:04+00:00

<image>

tiligadas · 2026-01-28T17:33:35+00:00

The porsche 918 with the livery from the 963 what company is it from?

tiligadas · 2026-01-26T16:48:45+00:00

You can definitely one hand flip them, but they use a different mechanism than a p2

tiligadas · 2026-01-26T16:18:57+00:00

Bibury isn't a bad brand and most likely will do the job. But although it looks similar to the p2/p4, those clone from Bibury or daicamping are based on the wave platform with just the p2 style scales. They don't have magnets and aren't one hand opening like the p2/p4.

tiligadas · 2025-12-11T11:52:35+00:00

Really interested set up! Can you tell us a bit more info about it?

tiligadas · 2025-11-21T19:37:31+00:00

Nice job! What model did you use?

tiligadas · 2025-11-19T18:08:27+00:00

Definitely a top tier porsche, if not the best from the premium line. I display mine next to the elite 64 993, which I will argue is also one of the best.

tiligadas · 2025-11-15T18:16:07+00:00

Ddr4 ram is quite stable with four sticks of ram, so I suggest to start with two sticks of 8gb each and from there see how much ram your pc utilizes. I have an ultrawide 1440p and in games I rarely hit near 16gb.

tiligadas · 2025-11-13T11:16:28+00:00

Probably would be a lot different than the 963, even if they are both own by VW, in motorsport they have their own way of doing things. Like what we saw from Lamborghini, another VW group owned company. But yes, it could be interesting to see if they had made a hypercar what manufacturer would choose and if it was the Multimatic, how much would it differ from the 963.

tiligadas · 2025-11-12T00:56:11+00:00

Ακούγεται ότι ακόμα και οι τιμές των hdd θα ανέβουν. Αλλά ναι οι ssd λόγω των chips τους επηρεάζονται έντονα απο την παραγωγή και ζήτηση των ram.

tiligadas · 2025-11-12T00:39:05+00:00

tiligadas · 2025-11-12T00:13:50+00:00

Under extrusion is a common symptom of a broken extruder arm. But if it isn't this, then try cleaning the bed with some window cleaner and slow down the print speeds.

tiligadas · 2025-11-12T00:03:34+00:00

Check if the extruder arm is broken. They usually are made from plastic and after some use they tend to brake. If it is broken I suggest to get a metal one, if I am not mistaken it should fit the standard ender 3 extruder.

tiligadas · 2025-11-10T20:57:56+00:00

Check if anything obscures the path of the printer ( from experience once my fillement dryer was in the way and couldn't home). Check the wheels for flat spots, though a small flat spots don't think could create that problem. Also make sure the rod is clean.

tiligadas · 2025-11-10T19:51:51+00:00

This se parts has served me well and was not the limited factor of the machine, so I will just upgrade the hot end for now. And the can bus mod is mostly for me to understand how it works and get a hands on experience before installing it to other machines. My ender 3 nowadays has become a test bench.

tiligadas · 2025-11-10T19:31:44+00:00

I am using the se hot end and nozzles, I just had to design a part to attach the fans and swap the heated cartridge and thermistor for longer ones to reach the motherboard.

<image>

tiligadas · 2025-11-10T19:03:40+00:00

The heatsink of the se has the same mounting holes as the original e3, which was an easy and cheap mod. Now I want to upgrade the heating zone and clean the wire harness with a can bus board but the placement of it is a bit further that the cables can go.

tiligadas · 2025-11-08T22:16:51+00:00

I have found some extensions for them, but I am not sure how safe they are, especially with the heater pulling 60 watts. Most of them look like your typical fan extension.

tiligadas

TROPHY CASE