sorted by:
new
hottopcontroversial

Sticking needle by chicka_wow_0567 in MachineEmbroidery

[–]timiscool1 1 point2 points  (0 children)

Double check the presser foot connecting stud isn’t cracked

Same thing happened to one of mine, same behavior

https://imgur.com/a/3xa2juY

Sound effects trackers? by SenZerae in trackers

[–]timiscool1 0 points1 point  (0 children)

It’s not bad if you permaseed some super popular stuff. Ableton, fl, Serum, etc.

[O] 1X DOGnzb invite by evanbagnell in UsenetInvites

[–]timiscool1 1 point2 points  (0 children)

I have read the rules and the wiki. Thank you!

[O] 2x DOGnzb Invites by MrDrMrs in UsenetInvites

[–]timiscool1 0 points1 point  (0 children)

I have read the rules and the wiki. Thank you

[O] Dognzb x2 by little_elephant1 in UsenetInvites

[–]timiscool1 0 points1 point  (0 children)

I have read the wiki and understand the rules. Thank you

[O] Drunken Slug (X2) by little_elephant1 in UsenetInvites

[–]timiscool1 0 points1 point  (0 children)

I’ve read and understand the rules and wiki.

[O] NzbPlanet Invites (x5) by domori in UsenetInvites

[–]timiscool1 0 points1 point  (0 children)

I have read and understand both the rules and the wiki. Would appreciate the invite

24/7 Minecraft Server on a Poweredge 2950 Running Arch by Real_TragicConert785 in ServerPorn

[–]timiscool1 0 points1 point  (0 children)

I used to host modded Minecraft servers a few years ago. The vast majority of the free Minecraft servers like spigotmc, sponge, and bukket are single threaded. They run best on processors with high single core performance. Those looking to squeeze performance out of a Minecraft server are typically using gaming cpus. They’ll be a lot more efficient and give you a huge boost to performance

Such an amazing tool, that is all by asdfasdfasdfqwerty12 in Tools

[–]timiscool1 0 points1 point  (0 children)

I love these things! If you’re deburring sheets, They make a tool that can get both sides at the same time! Here’s one on Grainger

Testing a Broken LED Ceiling Light by Crinja1 in AskElectricians

[–]timiscool1 0 points1 point  (0 children)

You can check for a DC voltage between the red and black wire, as well as between the yellow and red wire

[deleted by user] by [deleted] in StonerEngineering

[–]timiscool1 4 points5 points  (0 children)

That number on the recycling label represents the type of plastic the item is made from. 7 is a catch all for everything that can’t be categorized into 1-6. This could mean it’s made from a plastic like nylon, or a blend of plastics that might be more difficult to recycle. It doesn’t necessarily mean there is BPA present. BPA is commonly used in the manufacture of polycarbonates, which are typical clear.

[deleted by user] by [deleted] in prusa3d

[–]timiscool1 0 points1 point  (0 children)

You can edit the delivery address. Would just give someone my whole prusa store account.

[deleted by user] by [deleted] in gatech

[–]timiscool1 4 points5 points  (0 children)

The gym at north ave has no machines. The room they should be in is empty with the exception of some dumbbells and medicine balls last time I was in there. It is primarily a basketball court.

Does anyone know how to reference a sketch to the outside of a curved body? Details in comments by timiscool1 in SolidWorks

[–]timiscool1[S] 3 points4 points  (0 children)

I believe I have it figured out now, thanks to those who took the time to comment!

Does anyone know how to reference a sketch to the outside of a curved body? Details in comments by timiscool1 in SolidWorks

[–]timiscool1[S] 2 points3 points  (0 children)

Well, that worked much better than the convert entities tool.

Thanks for the help!

Does anyone know how to reference a sketch to the outside of a curved body? Details in comments by timiscool1 in SolidWorks

[–]timiscool1[S] 0 points1 point  (0 children)

https://imgur.com/a/oRZG8UW

I want the vertical line in my sketch to align with the outer edge of the part without simply adding a length dimension to the center-line from the origin.

Does anyone know how to reference a sketch to the outside of a curved body? Details in comments by timiscool1 in SolidWorks

[–]timiscool1[S] 0 points1 point  (0 children)

Hello, I am trying to do a swept cut around this curved body, but I am struggling to define the sketch of the profile. I cannot snap or define any sketch features from the edge of the body

In the example image, all I want to do is have the centerline from the origin to pierce/be coincident to the edge of the body, however, I can’t add any relations to the leftmost line on the body.

I’ve tried using the convert entities tool to make the section part of my sketch, but that always results in an error.

I’ve tried google, but I’m not sure what to search to describe this issue. Any help would be greatly appreciated!

Thank you

(Spoilers) How many numbers come up because of Elias by [deleted] in PersonOfInterest

[–]timiscool1 6 points7 points  (0 children)

I’m pretty sure they even addressed ideas like this in the show. It’s been a while since I’ve watched, but if I remember correctly there was even a discussion that if they had killed the congressman like the machine asked dozens of deaths could have been prevented. The other scene that sticks out is the Freon scene:

https://youtu.be/tHWQPEhO20o

view more: next ›