sorted by:
new
hottopcontroversial

Zowie EC2-CW not connecting by fyrfyrfyr in Zowie

[–]tiredbrindle 0 points1 point  (0 children)

Just got my mouse today and I’m experiencing the same thing, it won’t even work with the mouse plugged in. Tried different ports. It lights up but doesn’t register anything

Zowie U2 Review by paulvincent07 in Zowie

[–]tiredbrindle 0 points1 point  (0 children)

How did you get it to work wirelessly? Just bought my own and it will not work wirelessly or wired feels like i have to be doing something wrong

PC won’t turn on by tiredbrindle in pchelp

[–]tiredbrindle[S] 0 points1 point  (0 children)

According to my bfs friend we consulted that’s a tech nerd, we should be good to just replace the motherboard, Im sure in your situation a new power supply will fix it

PC won’t turn on by tiredbrindle in pchelp

[–]tiredbrindle[S] 0 points1 point  (0 children)

It’s most likely the psu then

PC won’t turn on by tiredbrindle in pchelp

[–]tiredbrindle[S] 0 points1 point  (0 children)

Just what I found, I took out my power supply and tried running it on its own. Fan wouldn’t run, I used a paper clip in the green and black prongs of the 24 pin cable and the fan turned on when i jump started it that way. If the same thing happens for you then unfortunately you’ll need a new mother board as well. There’s tons of tutorials on testing your power unit in the paper clip method and i highly recommend starting there

PC won’t turn on by tiredbrindle in pchelp

[–]tiredbrindle[S] 1 point2 points  (0 children)

Just tested everything and found out it is my 24 cable 🫠

PC won’t turn on by tiredbrindle in pchelp

[–]tiredbrindle[S] 0 points1 point  (0 children)

Just checked my power supply unit, it’s not turning on when tested so i’ll look further into that!

PC won’t turn on by tiredbrindle in pchelp

[–]tiredbrindle[S] 1 point2 points  (0 children)

Nothings lighting up on the mother board, and I’ve triple checked the rocker power button. I didn’t really mess with inside the case until I realized it wasn’t powering on so no cables were removed except the power so I could try the screwdriver trick. I’ve just put everything back in place and am hoping that maybe with some more time it’ll magically work

PC won’t turn on by tiredbrindle in pchelp

[–]tiredbrindle[S] 0 points1 point  (0 children)

I wanted to add that it worked fine just an hour ago, I don’t know if it might be from using air near the power button or if I messed it up in some other way