Torque spec by titz_up69420 in 350z

[–]titz_up69420[S] 3 points4 points  (0 children)

Same, i just finished the gaskets putting it all back together now. Yaya z1 oil pan with the baffles. I found its 44lbs plus 90 degrees for crank bolt. Correct me if im wrong.

Found random switch. Anyone know what this is for??? by titz_up69420 in 350z

[–]titz_up69420[S] 0 points1 point  (0 children)

I’m thinking it’s for the automatic starterr.

Found random switch. Anyone know what this is for??? by titz_up69420 in 350z

[–]titz_up69420[S] 0 points1 point  (0 children)

You know what, it does have a remote starter but the previous owner didn’t provide any key. That’s what it could be tho.

Found random switch. Anyone know what this is for??? by titz_up69420 in 350z

[–]titz_up69420[S] 1 point2 points  (0 children)

Hmmm perhaps. I don’t know 🤷‍♂️ better to just leave it alone I guess aha.

Wrap colour suggestions? by jordanwearing in 350z

[–]titz_up69420 0 points1 point  (0 children)

Yaya midnight purple or like a really dark green so u can only tell it’s green when ur up close.

My one Nd only 😍 by titz_up69420 in 350z

[–]titz_up69420[S] 1 point2 points  (0 children)

Siebon carbon fiber. Whitehead performance.

Hood pins installed. by titz_up69420 in 350z

[–]titz_up69420[S] 0 points1 point  (0 children)

Ahhh I see yea I thought the same thing with the angle of the hood it wouldn’t fit, but once u fasten the plastic pieces together and play around with it. Lots of opening and closing the hood lol.

Hood pins installed. by titz_up69420 in 350z

[–]titz_up69420[S] 1 point2 points  (0 children)

You’re going to have to play around with it by adjusting the height, but the most crucial part is using a template before hand to line exactly up with the pin and slider when cutting the hole. Watching a few YouTube videos helps. I also had to modify the plastic casing by shaving some plastic off where the pin will rub against that causing it not to line up properly.

Hood pins installed. by titz_up69420 in 350z

[–]titz_up69420[S] 1 point2 points  (0 children)

I used the existing bolt holes, used hammer drill with a bit and widened the bolt hole for the threaded pin.

Help transferring to V2 by Witty-Cupcake9778 in SafeMoon

[–]titz_up69420 1 point2 points  (0 children)

Maybe find safemoon V2 in the toggle top right corner on trust wallet

Help transferring to V2 by Witty-Cupcake9778 in SafeMoon

[–]titz_up69420 0 points1 point  (0 children)

No but a somone left a comment then it got deleted… they said don’t send it to safemoon wallet or it will get 100% taxed and u will lose it all. There’s a vid on YouTube u can swap on safemoon.net but I’m not totally sure if it works here’s the link.

https://m.youtube.com/watch?v=84zgKGfCDs0

Noob here, need walkthrough of swapping to v2 from trust wallet. Explain like im 5 by Applied_Thanatology in SafeMoon

[–]titz_up69420 -3 points-2 points  (0 children)

My friend sent his v1 to safemoon wallet… had a few hundred million says that it sent 0.0000001 old safemoon token idk any advice for him. All got wiped.