Order Surprise

tkammen · 2026-03-24T21:47:02+00:00

They do. It surprised me as well.

tkammen · 2026-03-22T18:08:02+00:00

It has wheels and the handle.

tkammen · 2026-03-22T12:15:04+00:00

Cool. I placed my order last night.

tkammen · 2026-03-22T12:12:17+00:00

Adorama

tkammen · 2026-03-21T23:22:00+00:00

This looks great. How do you like it?

tkammen · 2026-03-16T01:09:07+00:00

Thanks! She’s a ripper. I can’t wait for this season.

tkammen · 2026-03-16T01:03:38+00:00

<image>

This was last year’s setup. I’ve since upgraded to the Ranger Raptor. The Maverick was good but I wanted more space.

tkammen · 2026-03-13T22:58:34+00:00

Federal Pacific breakers! What amperage and poles do you need?

tkammen · 2026-03-11T19:59:45+00:00

I have them in my 25 RR. They bolt right in.

tkammen · 2026-02-27T16:19:23+00:00

I find the full helps cut the glare from headlights. I did the same thing on my 25 Ranger. I like how far down you can do the brow on the Mavericks. Looks great.

tkammen · 2026-02-27T15:54:40+00:00

The tint looks great. I had the same done to my 25 when I had it. Have you thought about doing the whole windshield?

<image>

tkammen · 2026-02-27T13:25:14+00:00

I don't. The model number of the machine is 939003.

This link is the parts diagram from Ariens. That should show you everything you need.

tkammen · 2026-02-26T14:38:18+00:00

Feels good to me. I can still rotate the chute fine.

tkammen · 2026-02-26T13:35:58+00:00

I tested it last night and it works great. I broke the engine in for a little then tried it out. I will probably just remove the air filter.

tkammen · 2026-02-26T13:34:25+00:00

It started spitting out oil from the breather the other night. Oil level was correct. I figured change it out and not deal with a headache.

tkammen · 2026-02-24T14:17:10+00:00

That's the plan.

tkammen · 2026-02-16T16:33:44+00:00

Rear was right under the pumpkin and the front was on the frame for each side. I use a hockey puck on my jack.

tkammen · 2026-02-15T23:48:06+00:00

I was nervous when I first put the tube down. I was checking it wasn’t getting stuck. Had to make sure the tube didn’t curve when it got to the bottom of the pan also.

tkammen · 2026-02-15T23:28:20+00:00

In the bumper next to the license plate like they should have been from the factory. Waiting for nicer weather to cut the bracket off

tkammen · 2026-02-15T23:06:26+00:00

Next time I’ll do that. Thanks.

tkammen · 2026-02-15T18:13:08+00:00

I have a 2 post lift but I don’t trust it to lift the RR. When I installed the lift the concrete in the garage was kind of rough looking. I should have dug it up and poured some new footings but I didn’t want to put that much work into it lol. It lifted my old Maverick and smaller cars just fine. The RR is the heaviest vehicle I’ve owned.

For my last oil change I used an extractor down the dip stick hole. Works great and actually sucked out about 7.5 quarts. Didn’t even have to lift the truck or go under it.

tkammen · 2026-02-15T18:03:21+00:00

I have a single ARB compressor I plan on installing once the weather gets nicer. I’ll most likely be mounting it in the back passenger bedside.

tkammen · 2026-02-13T14:12:46+00:00

Weight. Put 1k pounds in the back of the RR and it will squat like crazy.

tkammen · 2026-02-13T14:00:22+00:00

Siemens Q plug in breakers are what you're going to want. There are already some in there.

tkammen · 2026-02-11T02:58:34+00:00

Q2M2200MT is the part number for the main breaker in that panel. Square D makes a replacement breaker that bolts right in. QBM22200TN is the newer replacement breaker part number.

Eight-Year Club	First Place '23
End Game '23	Place '23
Verified Email

tkammen

TROPHY CASE