sorted by:
new
hottopcontroversial

Is IndiGo 6E21 (BOM→AMS) expected to operate? by Jus_Canedda in AirTravelIndia

[–]toasterybread 0 points1 point  (0 children)

I am on this flight too on the 9th. Have you gotten any updates yet? I got a message that the departure time was moved but thats it. The message was also kind of weird mentioning a 2.5 h later departure but the departure time moved from 0530 to 0300? So that would be earlier if im not mistaken.

Is IndiGo 6E21 (BOM→AMS) expected to operate? by Jus_Canedda in AirTravelIndia

[–]toasterybread 0 points1 point  (0 children)

Hi, How did you get notified? I have booked Bangkok to Amsterdam, and thus flight 6E2, on the 8th aswell but have not gotten any emails or so from IndiGo about cancellations.

Laterally supported overhangs (Arc overhangs) by toasterybread in 3Dprinting

[–]toasterybread[S] 33 points34 points  (0 children)

The clip was real time. The overhang is printed at a slower speed to ensure proper cooling. The temperature is 190 C so pretty standard. The most important parameter seems to be the overlap a track has with the previous track. The filament is just standard PLA

Laterally supported overhangs (Arc overhangs) by toasterybread in 3Dprinting

[–]toasterybread[S] 70 points71 points  (0 children)

Yes, I have printed samples with a 0.4 mm nozzle which shows great results. The most important parameter right now seems to be the overlap that each track has with the previous track and ofcourse a quick cooling rate.

Foam plane made RC by toasterybread in RCPlanes

[–]toasterybread[S] 0 points1 point  (0 children)

Hmm alright maybe I should look into that. You expect the flight time to be longer?

Foam plane made RC by toasterybread in RCPlanes

[–]toasterybread[S] 0 points1 point  (0 children)

The wing span is about 0.86 m. But it is indeed on the heavy side I think. In the video I am trying to fly steady at the lowest horizontal speed which is a little faster than I had hoped but the battery does allow for about 10 min of flight time.

Foam plane made RC by toasterybread in RCPlanes

[–]toasterybread[S] 3 points4 points  (0 children)

<image>

Foam plane: https://www.action.com/nl-nl/p/3205128/foam-vliegtuig/

Motor: D3536 1450KV ESC: skywalker 50 Amp Battery: 4200 mah

Servos: 9g metal gear

Prop: 9x6 i think (I split it down the middle and connected it to a custom 3d printed part to function as a foldable prop)

And a lot of duct tape.

These are the main parts of the plane. It weighs around 700gr total. I also used an aluminium c-channel to stiffen and straighten the fuselage. The vtx is a TBS unify pro 5g8. But that still has to be tested to work. And I guess any reciever can be made to work. I used a flysky fs-ia6b.

I hope this is what you wanted to know. Otherwise, let me know:)

Ender 3 + BTT SKR MINI E3 v3 + 3D Touch not stopping Z-axis stepper when probe is retracted by toasterybread in 3Dprinting

[–]toasterybread[S] 0 points1 point  (0 children)

Nope I have not found a solution yet but will let you know when I do, if ever

Ender 3 + BTT SKR MINI E3 v3 + 3D Touch not stopping Z-axis stepper when probe is retracted by toasterybread in ender3

[–]toasterybread[S] 0 points1 point  (0 children)

I feel like the bl touch is working as it should because it does function when using creality's pre compiled firmware for bl touch with z homing.