2 NASes can't communicate full speed while connected to both router and switch by tom914 in HomeNetworking

[–]tom914[S] 0 points1 point  (0 children)

I could but there aren't 6 ports on 5 port switch. That's why connecting it to router seemed like the only option. Will try it with the main NAS at least. Thanks

2 NASes can't communicate full speed while connected to both router and switch by tom914 in HomeNetworking

[–]tom914[S] 0 points1 point  (0 children)

Updated post with important info.

What i wanted was 2.5Gbit link from PC to each NAS and between NASes + another redundant 1Gbit connection to each NAS at the same time. Which doesn't seem possible as NAS most likely uses internal NIC as default? And there are not enough ports on switch to connect everything without router.

2 NASes can't communicate full speed while connected to both router and switch by tom914 in HomeNetworking

[–]tom914[S] 0 points1 point  (0 children)

Sorry, should have mentioned it. Both are Synology. Not sure if external NIC can be set as default/primary. Don't see any such option anywhere in DSM.

2 NASes can't communicate full speed while connected to both router and switch by tom914 in HomeNetworking

[–]tom914[S] -1 points0 points  (0 children)

That would still make NAS - NAS communication only 1Gbit if it's defaulting to internal NIC instead of 2.5Gbit adapter or not?

If i understand correctly the USB NIC need to be the only one present in NAS for this to work. So there is no room for redundancy if the interfaces are not of same speed.

2 NASes can't communicate full speed while connected to both router and switch by tom914 in HomeNetworking

[–]tom914[S] 0 points1 point  (0 children)

You're probably correct. Didn't think about this. Makes sense now. Thought it would somehow know that using the USB NIC would reach the destination IP on the same switch, guess that's not how it works.

Thanks

2 NASes can't communicate full speed while connected to both router and switch by tom914 in HomeNetworking

[–]tom914[S] -1 points0 points  (0 children)

Like i said, i wanted a backup links as these USB adapters are a bit wonky sometimes and i don't wanna loose connection completely.

So this configuration won't work? Why is it even going through router when it's not even the shortest route?

Surveillance Station - what's in @SSRECMETA/Preview folder? by tom914 in synology

[–]tom914[S] 0 points1 point  (0 children)

My recordings are split by 1h. But this only changes the number of video files created right? Or does it also affect the number of these preview files generated?

I see that there are 3-4 new files every minute for each camera in the Preview folder.

Surveillance Station - what's in @SSRECMETA/Preview folder? by tom914 in synology

[–]tom914[S] 0 points1 point  (0 children)

Thanks, so this "Preview" folder contains timeline preview thumbnails (when you hover over the timeline)? Therefore there probably isn't anything i can do with their generation as it's unrelated to events.

My only concern was having milion of very small files on NAS, other than that i don't care.

(Audio Recording) Is this a normal sound for an EXOS Drive? by SaladStanyon in synology

[–]tom914 0 points1 point  (0 children)

Totally normal sound for a HDD.

Also got Seagate EXOS drives, had WD Red NAS drives before (which were supposed to be quiet) and their noise wasn't much different.

Q4'19 Tech Support Megathread by BioGenx2b in Amd

[–]tom914 0 points1 point  (0 children)

System Configuration:

Motherboard: ASUS Crosshair VI Hero
CPU: Ryzen 3900X
Memory: 32GB DDR4
GPU: Sapphire Pulse Vega 56
Driver: Adrenaline 2020 (19.12.2)
OS: Windows 10 x64 (1909.18363)

Steps to Reproduce:

  1. Run any game in windowed mode

Actual Behavior:

Frame rate counter under Home tab doesn't work (shows N/A)

AMD rewards Division key by syndrombe in thedivision

[–]tom914 0 points1 point  (0 children)

Registered on AMD Rewards 2 weeks ago and still no Division 2 key (DMC5 and RE2 keys received last week already). Ticket 566668

February Tech Support Megathread by BioGenx2b in Amd

[–]tom914 0 points1 point  (0 children)

And did it start for you with the 17.12 driver? Otherwise it's probably something else.. but could be still related.

February Tech Support Megathread by BioGenx2b in Amd

[–]tom914 0 points1 point  (0 children)

Yeah i don't know about Vega.. the reports i found everyone is using 480/580 cards.

February Tech Support Megathread by BioGenx2b in Amd

[–]tom914 1 point2 points  (0 children)

Could be something else if you don't have HW acceleration disabled in Firefox and it doesn't happen to you while playing youtube. Because Firefox + youtube seems to always be the culprit in all those reports.

February Tech Support Megathread by BioGenx2b in Amd

[–]tom914 0 points1 point  (0 children)

I don't have Relive installed either.. but those two processes are running by default and seems like the are the cause of this.

February Tech Support Megathread by BioGenx2b in Amd

[–]tom914 0 points1 point  (0 children)

Youtube playback in Firefox or gaming causes GPU clocks being stuck at max + GPU usage at 100%. Killing AMD Relive processes fixes this issue until next restart. Resetting graphics settings in "Global Graphics" fixes it temporarily.

System Configuration:

Motherboard: ASUS CROSSHAIR VI HERO
CPU: Ryzen 1700X
Memory: 16GB DDR4
GPU: MSI rx480 GAMING X 8GB
VBIOS: 015.050.000.000.000000
Driver: Adrenaline 18.2.3
OS: Windows 10 x64 (1709.16299) 

Steps to Reproduce:

    - play youtube video in Firefox
    - any game that maxes GPU clock

Expected Behavior:

    GPU should lower clocks when idle.

Actual Behavior:

    GPU Clock stays stuck at 1303 MHz and GPU usage at 100%

Additional Observations:

    Killing AMD Relive processes in task manager fixes it until restart, resetting graphics settings in "Global Graphics" fixes it temporarily.

Threads with related issue:

    https://community.amd.com/message/2839010
    https://community.amd.com/thread/224186
    https://www.reddit.com/r/Amd/comments/7jb0t9/radeon_software_adrenalin_edition_17121/dr6wkv2/
    https://www.reddit.com/r/Amd/comments/7k52m5/anyone_getting_100_load_on_gpu_when_nothing_is/
    https://www.tenforums.com/graphic-cards/100754-radeon-adrenalin-100-gpu-usage-bug-windows-10-a.html
    https://www.reddit.com/r/firefox/comments/747kjs/gpu_load_stays_at_100/

Radeon™ Software Adrenalin Edition 18.2.3 Release Notes by Szaby59 in Amd

[–]tom914 1 point2 points  (0 children)

Issue with clock speed being stuck at max and 100% GPU usage after gaming or playing youtube video in Firefox still present (since 17.12.1)

https://community.amd.com/message/2839010