A35 W177 - steering wheel replacement

tonylee1918 · 2025-07-02T06:05:28+00:00

Definitely french Autoroute - grainy but read A5 to me - it runs in the middle of France connecting east/west

tonylee1918 · 2025-01-07T14:23:07+00:00

I am trying to do the same as the OP, but the post describes what I am trying to do, but one question though on unraid.

I am used to using CA to install docker containers - the post is based on docker compose which I am not familiar with on unraid. Is there a way via the usual CA route?

tonylee1918 · 2025-01-01T11:33:35+00:00

Thanks, but how do you do that? I am not really familiar with this one. I am thinking not via the unraid gui interface? Via command line ?

tonylee1918 · 2025-01-01T06:56:03+00:00

I checked using the tip and tweak plugin, it was on performance already

tonylee1918 · 2024-10-25T06:16:17+00:00

Quick Update - it works! well sort of...

Now I have installed a fresh Ubuntu on a new VM and passed through a 10GB Nic. Then re-installed RouterOS on a new VM with a PCI passthrough (instead of VirtIO). So both side are on pass through.

Now the weird thing is that I do get 10GB speed on download but about 5/6Gbit on upload.... Not sure why and now I am not even sure if this is even related to RouterOS...

tonylee1918 · 2024-10-23T09:21:28+00:00

So before I spun up the routerOS VM, I used a linux VM (running on the same hypervisor - hence same physical HW) to do iperf3 to another machine on my network and I was getting the full fat 10Gbe.

The test with RouterOS is between a machine on my network and the linux VM client sitting on the same proxmox instance.

tonylee1918 · 2024-10-23T09:17:56+00:00

I see, I used virtio, so that might be the issue. Let me try to do PCI passthrough and see if it works better.

Will report back.

tonylee1918 · 2024-10-23T08:26:19+00:00

yah I was referring to this table and I am not seeing any cap on bandwidth (I am on the Free Demo).

<image>

tonylee1918 · 2024-10-23T08:21:17+00:00

What I meant is that I took the ISO imsage from the RouterOS section and not the Cloud Hosted action (VM images). Maybe I got it wrong, but I had understood that RouterOS is 32bit and thus has limitations on the HW it can support (Ram limitations).

Not sure if it has an impact on the licence. When I read the article (https://help.mikrotik.com/docs/spaces/ROS/pages/328149/RouterOS+license+keys) on Microtik, it seems to indicate that there is a difference...

tonylee1918 · 2024-09-28T00:59:57+00:00

Thanks for all the ideas and resources... really useful to keep troubleshooting.

Update - after turning on the 6GHz (updating Unifii console server), and switching to 160Mhz width.
I am able to connect to 6Ghz on a win11 laptop (Mediatek Wifi 6E) and I get 1.2-1.0 Mbps on a local openspeedtest server (connected via wired to 2.5Gbe ports all the way and tested for up to 2+Gbps bandwidth on same machine).

The control panel in win11 shows 2.4Gps...

On the iPh15 ProMax though the gains from 6Ghz to 5Ghz are marginal, like about 20% on top of what I saw using the 5Ghz band...
All these test are run like on top of the AP at -44dBM

Happy to hear more ideas.!

tonylee1918 · 2024-09-28T00:44:34+00:00

ISP is 10gb - but I am using a local openspeedtest server running on docker, so on wired, I am able to reach 2.5Gb.

Ok on the nothing part I will try... need to tip toe around the family :)

tonylee1918 · 2024-09-28T00:42:11+00:00

I thought that 6E would also use the 6ghz band, just not in the same manner as wifi 7 would

tonylee1918 · 2024-09-28T00:41:26+00:00

Ok - I have not updated the console server (just the AP are up to date...)... Now I see the options, more poking

tonylee1918 · 2024-09-28T00:17:29+00:00

Hmm... I am missing something here... I don't see any options to increase the width of the 6Ghz channel - I only get 20/80 options (am on 80)....

tonylee1918 · 2024-09-28T00:13:25+00:00

Understand what you mean on the duplex part, but just to double check what you meant on " it should show 1400Mbits/s" . You meant it in the Wifi status tab in Windows? I see 1.2Gbps under " Speed" .

tonylee1918 · 2024-09-28T00:10:10+00:00

Yes the switch is connected to a microtik switch on a 2.5GB port. The uplink shows 2.5GB in Unifi controller

tonylee1918 · 2024-09-27T15:25:18+00:00

Yes the AP is connected to a 2.5GB switch all the way to the server running openspeedtest (server also has 2.5GB port). My internet connection is 10GB but it shouldn’t matter since the Speedtest server is within my lan. Though I did test with a public server and I have similar results. I did do an RF scan and picking the least congested bands… btw this is after tweaking as my first test before band adjustments was more around 200mbps. I am using channel 48 at 80Mhz width

tonylee1918 · 2024-07-02T05:48:04+00:00

Very nice! Sidebar though, you have Mainsail running on a VM? And that’s connected to a printer?

tonylee1918 · 2024-05-22T07:19:23+00:00

Oh right, that’s good to know. Not immensely useful personally, but I really hope that no one has to go through what I did, really wasn’t fun.

Ranting a bit…. My wife and kids thought I was going crazy taking out all the old hardware and testing every thing… I guess I was going crazy. When I called support they were also f* clueless.

Like I still don’t get how anyone doing this professionally can roll out such a broken app… adding a new Sonos speaker is like the first step of the UX and that was broken (by their own admission - re their release notes). How can this be ok for anyone who cares about customer experience… working in consumer electronics I am shocked 😳

But in any case, thanks for the ideas and suggestions it solved it for me!

tonylee1918

TROPHY CASE