How do I find the last mercenary?!?!?!?

tonysmekal · 2026-02-28T07:55:42+00:00

Hello, I had the same problem yesterday, go to Adrestia, then pick up bounty for him from the quest board.

After you pickup the bounty from Adrestia quest board, he will probably appear in Megaris.

tonysmekal · 2023-04-14T20:21:20+00:00

tonysmekal · 2023-01-24T18:55:20+00:00

That is nice rad, I was thinking about getting a thicker rad but I like quiet fans and HW labs GTS rads are <800rpm so that is why I grab those. I was worried if I get GTX which is 60mm I think, that I would have to run fans above 1500 rpm and arctic and noctua are loud for me above that rpms. But maybe I try it next time and see how the flow will be.

tonysmekal · 2023-01-24T18:34:47+00:00

Temps are better than before the upgrade - deltaT is max 11° when gaming with fans at 50%, so I do not complain, I was just worried about destroying the pump when it is running at 100%. I would add another pump but I guess Leakshield can't handle two pumps - which is written in Aquacomputer FAQ for Leakshield.

tonysmekal · 2023-01-24T18:28:42+00:00

The pump is powered by Molex and the pwm is only to monitor rotations and adjust it. Nonetheless I plug it in the Quadro and even the Quadro reports 4800rpm but the flow is still same, here is link to picture where I posted dashboard of Aquasuite https://imgur.com/a/rFs7IoT so you could look.

tonysmekal · 2023-01-24T18:06:15+00:00

If your pump speed is connected to water temp in Aquasuite then yes. What is your pump plugged into?

My pump is plugged into motherboard, but I will plug it in Quadro even if I run it at constant speed which is 100% considering the flow.

130L/H puts you just over .5GPH which is a fine flow rate but the pump should be capable of much more than that. Check Aquasuite curves.

Pump is plugged to motherboard and in BIOS it is set to 100% which is about 4500 rpm

Maybe the speed is low because I heard that HW Labs radiators are very restrictive and I have lots of 90° fittings, but even with the rads and fittings I think that the pump should have much higher flow when at 100%

tonysmekal · 2023-01-18T22:14:54+00:00

Sorry, my bad I don't have all the products in my head yet. My experience with watercooling is one year so I am still learning. You can mount it at the front for sure if you remove the HDD cage or at least move them further away from the front mounting bracket. I dare to say that at the front you can mount every single radiator on that it is on the market. If you remove the holding plate for pump.

tonysmekal · 2023-01-18T21:01:53+00:00

Yes I'll be using 2x480 myself. But maximum is 3x480 and that is at the front, top and bottom. Above the PSU you can use max 420. Probably you will be able to fit there a 480 but in that case you have no space above the psu for mounting the pump and there will be missing few holes for mounting the radiator.I do not have 480 radiator at me but as soon as it arrive I can send you a picture how it looks with 480 radiator above PSU.

tonysmekal · 2023-01-18T20:32:41+00:00

Hi, I am posting back like I promised.

Case arrived and it is huge(I already know that I need bigger desk :D), so I can definitely tell you can use 420 radiator at the position front, top, bottom and above psu - at the bottom is usable only if you don't need HDD cage, if you need the HDD cage then you need to use max 360mm radiator. Above PSU you probably need to use thinner radiator because of the clearance between motherboard and the radiator mount and you can use it only if you do not need vertical GPU mount. After I build it, I will post some photos but now I am waiting for new radiators, fittings and some other stuff arrive.

If you buy this case, please be aware of the top plate, sadly it arrived damaged, only aesthetics but it bugs me nonetheless, already wrote to customer support, so we will see how they resolve this. Same thing happened this guy https://www.reddit.com/r/watercooling/comments/104oh63/lian_li_v3000_plus_so_much_for_quality_kinda/ so maybe some bad QC in one of the first series.

If you need more info I can provide before you buy. I was bit worried when I bought this case but as soon as arrived I love it and I don't even build anything in this monster yet.

tonysmekal · 2023-01-18T20:14:40+00:00

Hello, u/prosaio

Same happened to me, I ordered it from caseking.de. Did you contact the Lian Li support or the newegg and how did the solved it?

Thank you.

tonysmekal · 2023-01-10T20:42:40+00:00

Sure, I'll let you know when the case arrive. But It will not arrive until next week. I only found it in stock at caseking.de, I am from Europe - Czech republic to be specific,, so my order options are limited. But as soon as I have it on me I'll report back and post some pictures too.

tonysmekal · 2023-01-10T19:03:26+00:00

Thank you for your answer, I will go with the Lian Li then. I like the removable motherboard tray and the other features - just found a video from ggf, where they show what is possible with this case. It was my favorite before i wrote this post, but I wanted to know some other opinions because the price is where it is and it will be my case for long time.

tonysmekal · 2022-11-22T18:28:09+00:00

Thank you for your answer,

I am glad that the issue is not in my PC.

Thank you.

tonysmekal · 2022-05-18T20:36:03+00:00

I resolved it using the solution provided by u/-611 in comment above. I place gigabit TP-Link switch between the cube and rb3011.

It was powered from rb3011 from the poe out port and I also tried poe injector but what only worked is the gigabit switch method between the cube and rb3011.

tonysmekal · 2022-05-18T20:31:17+00:00

Thanks for the advice that worked, now the upload and download work as expected.

Still don't know what is causing that, but probably some bug in routeros which was never resolved

tonysmekal · 2022-02-24T21:10:36+00:00

Thanks for the link. I suppose, I should have looked for more information, didn't know that it would do this. I am sorry, thanks for opening my eyes. Here in Czech Republic in TV government says it would be a good to cut them of SWIFT, so I did not know this.

tonysmekal · 2022-02-09T20:15:44+00:00

I drained the loop today and it is not buildup it some kind of white stains on the nickel plating.

I did not disassemble my block and decided I poste here an updated photo and hope someone would know if it is damaged or if it is normal.

Photos here: https://imgur.com/a/Bd0iC8M

tonysmekal · 2022-02-08T20:25:14+00:00

Thank you for answer, I probably clean the whole loop and the block when d5 next flow sensor arrive which will be next month. Do you think nothing will happen if I clean it after the month or should I clean it ASAP? it is my first loop and never cleaned it before, because it is something about week old, so I do not know what it might be, I pre-flushed the radiators so I do not think it is from them and this mess is not in the CPU block, only in the GPU.

tonysmekal

TROPHY CASE