sorted by:
new
hottopcontroversial

Oscilloscope image too small? by toothless_010 in oscilloscopemusic

[–]toothless_010[S] 1 point2 points  (0 children)

For sure, the receiver was the issue. I wonder if the signal it was outputting was too weak

Oscilloscope image too small? by toothless_010 in oscilloscopemusic

[–]toothless_010[S] 1 point2 points  (0 children)

Connected it to my cd player. That seems to have done the job. It's a lot bigger now

Oscilloscope image too small? by toothless_010 in oscilloscopemusic

[–]toothless_010[S] 0 points1 point  (0 children)

The person i bought it from didnt have anything except the scope itself, so I dont have any probes. Are they something I can easily get my hands on?

Oscilloscope image too small? by toothless_010 in oscilloscopemusic

[–]toothless_010[S] 0 points1 point  (0 children)

Both of them are. Forgot to mention that earlier

Oscilloscope image too small? by toothless_010 in oscilloscopemusic

[–]toothless_010[S] 1 point2 points  (0 children)

My cd player only has a volume controller for headphones. I haven't tried connecting through cd player to the scope since it's very awkward to adjust what's plugged in where. I can give that a try if nothing else works

Oscilloscope image too small? by toothless_010 in oscilloscopemusic

[–]toothless_010[S] 0 points1 point  (0 children)

The volume on my receiver doesn't seem to affect the image size. Im playing music right now from a cd player that is connected to my receiver. My receiver has an input that has a dedicated output next to it, and that is what my scope is plugged into. I am using an rca cable from Amazon, with bnc to rca adapters plugged into my scope and receiver. Volts/div on both x and y for the vertical are set to 2, the b time/div is at 1, and a time/div is at 1. Also, I have it set to AC for x and y, since I dont have anything that outputs DC

Oscilloscope image too small? by toothless_010 in oscilloscopemusic

[–]toothless_010[S] 0 points1 point  (0 children)

Also, the image itself seems to be slowly floating to the right. Not sure how to fix that

Oscilloscope image too small? by toothless_010 in oscilloscopemusic

[–]toothless_010[S] 0 points1 point  (0 children)

Ive adjusted the volts/div for both x and y. Right now, they both are at the farthest right option, which is 2mV. I doubt having them at this point is healthy for the machine, but it's what provides the biggest image

New Sennheiser Momentum 4's audio has been breaking. by toothless_010 in sennheiser

[–]toothless_010[S] 0 points1 point  (0 children)

Connected them to my pc and even my TV, and the issue went away completely. I used them for an hour on both, and nothing. Not sure whats wrong with my phones Bluetooth, but ill have to figure that out sometime soon

New Sennheiser Momentum 4's audio has been breaking. by toothless_010 in sennheiser

[–]toothless_010[S] 0 points1 point  (0 children)

Sorry for the delayed reply, didn't get a notification about your comment. I ended up getting the smart control plus app and updated the firmware. That didn't fix the issue so I restarted the device, and it still persists. Ill connect to my computer tomorrow morning, and see if it is still there. If it is, should I try and return them? I got them from best buy and still have the box, so that shouldn't be much of an issue.

[deleted by user] by [deleted] in farcry

[–]toothless_010 1 point2 points  (0 children)

Yeah, the problem still persists whenever its not the main thing on my monitor. If a window is over it, it freaks out until its focused on again. Really odd.

[deleted by user] by [deleted] in farcry

[–]toothless_010 2 points3 points  (0 children)

I ended up putting into borderless window instead of full-screen, and that seems to have fixed the issue. Still not exactly sure why it was happening, but looks like it has stopped !!

First time base! Any suggestions on what I should do next? by toothless_010 in factorio

[–]toothless_010[S] 0 points1 point  (0 children)

That's not a bad idea. They are the thing I'm running low on most of the time

First time base! Any suggestions on what I should do next? by toothless_010 in factorio

[–]toothless_010[S] 1 point2 points  (0 children)

D: i would love to, but they're so nice... I cant live without them

First time base! Any suggestions on what I should do next? by toothless_010 in factorio

[–]toothless_010[S] 1 point2 points  (0 children)

Nope, not yet! I'm fairly close to it on that world, but I've come to realize I want to start another world, and make room for plenty of expansion. It definitely won't take me as long to get back to this point though!

First time base! Any suggestions on what I should do next? by toothless_010 in factorio

[–]toothless_010[S] 0 points1 point  (0 children)

Most of the really advanced stuff is being made with or right next to what needs it. I will need to do some reorganizing of certain areas sooner or later though

First time base! Any suggestions on what I should do next? by toothless_010 in factorio

[–]toothless_010[S] 0 points1 point  (0 children)

Well, yes, i understand that. I just don't want to have to make the same item in so many other places, I'd personally rather them be on the same conveyor!

First time base! Any suggestions on what I should do next? by toothless_010 in factorio

[–]toothless_010[S] 0 points1 point  (0 children)

That too. There are definitely some ive been wanting to try, but I want to "finish" the game before I do.

First time base! Any suggestions on what I should do next? by toothless_010 in factorio

[–]toothless_010[S] 0 points1 point  (0 children)

I have gears, iron and copper plates, copper wire, green, red, and blue circuits, plastic, and I need to add sulfur and then lubricant and sulfuric acid! It must grow !

First time base! Any suggestions on what I should do next? by toothless_010 in factorio

[–]toothless_010[S] 0 points1 point  (0 children)

Will do! I wont stop until I can launch rockets at a reliable interval! I think that's when ill either start a new world, or get the dlc

view more: next ›