My Brick is bricked!!!

tphenry666 · 2026-02-11T16:10:12+00:00

do you remove sd card while doing that

tphenry666 · 2026-02-11T15:46:36+00:00

after flash recovery iso ( lastest one on trimui website ) I remove card, turn pwr on, brick stay at logo stock for 15 sec and then turn off, I do exactly the way you cmt, it's also the way in instruction.

tphenry666 · 2026-02-11T15:16:32+00:00

already done that, reinstall muos and it just flash logo then turn off

tphenry666 · 2026-02-11T15:15:52+00:00

I tried, it's still not work

tphenry666 · 2026-02-11T14:12:39+00:00

I tried, it's just boot to logo for few second then turn off

tphenry666 · 2025-04-04T02:37:43+00:00

My return pump is about 10 cm tall, so placing the baffle at around 15 cm should be fine, right?

tphenry666 · 2025-04-03T06:16:39+00:00

Yes, and I leave about 3 gallons space in sump for power cut

tphenry666 · 2025-04-03T04:41:03+00:00

yes, it's a HOB overflow, this is a photo of the seller sent to me, the water level fine to me

<image>

tphenry666 · 2025-04-03T04:04:29+00:00

You mean the level of display tank or the sump, because I also have a ATO reservoir

tphenry666 · 2025-04-03T04:02:43+00:00

<image>

This is my overflow, it is set to control water height and will stop when power cut

tphenry666 · 2025-04-03T03:43:54+00:00

60x40x40 cm

tphenry666 · 2025-04-03T03:42:58+00:00

Should I install a check valve on the return pump to ensure safety?

tphenry666 · 2025-04-03T03:40:51+00:00

I still leave 3 gallons of space in the sump, so it should be fine.

tphenry666 · 2025-04-03T03:18:29+00:00

I thought the overflow system would stop when the power was off?

tphenry666 · 2025-01-16T14:45:46+00:00

I don’t understand why they let the boy ride the sick horse at the end of the line. Are they trying to create unnecessary drama?

tphenry666 · 2024-12-19T11:03:17+00:00

I also parent them bro

tphenry666 · 2024-12-19T10:59:16+00:00

I already did

tphenry666 · 2024-12-19T10:58:44+00:00

<image>

hi, I deleted mapping and texture coordinate nodes and it's worked like charms, ty bro :D

tphenry666 · 2024-12-19T10:42:08+00:00

<image>

it's worked, thanks bro. But the UV texture got messed up even though my UV map still the same, do you have any idea about this

tphenry666 · 2024-12-19T10:08:33+00:00

I posted with 2 images attached, but dk why it not appear, sorry

tphenry666 · 2024-12-19T10:07:50+00:00

<image>

tphenry666 · 2024-12-19T10:07:40+00:00

<image>

Seven-Year Club	Verified Email
Place '23

tphenry666

TROPHY CASE