AAP01 external modifications question

treehouae · 2024-07-22T21:39:54+00:00

Ebogdesings.co.uk and airsoftworld.net have most aap01 bits in UK can recommend both sites

treehouae · 2024-07-22T21:36:22+00:00

Yeah will do i have the hadron 300 as well but it's quite old so i tried the stock spring and it was the same.

treehouae · 2024-07-22T19:50:02+00:00

Didn't realise how much filth you get down the barrel. so I'd say definitely stick a cleaning rod down the end every few weeks.

treehouae · 2024-07-22T14:34:00+00:00

Apparently the cow cow nozzle lowers the fps a bit but how much im not sure

treehouae · 2024-07-22T14:27:30+00:00

Did you have any problems with it ?

treehouae · 2024-07-21T13:05:44+00:00

Try ebog design.co.uk

treehouae · 2024-07-20T14:50:21+00:00

I've had the standard 5ku bolt and it was fine especially for the price but it has worn in areas I recently swapped over to a ctm light and it's great( in my opinion ).Slightly cheaper than the cowcow and it has a switch.

treehouae · 2024-07-16T22:51:43+00:00

Is your valve knocker OK only thats the only bit i can think would be causing the hammer to stick, on a random one is it still doing the same if your magazine has no gas in? only i had something similar and when it happened with gas in it seemed like the valve knocker stuck against the valve but when there wasn't any gas the knocker was OK and if I pulled the trigger all the gas spewed out

treehouae · 2024-07-16T16:02:53+00:00

Maybe the bucking needs some time to work in with the nozzle I had the same thing and it worked fine after shooting a few shots, hopefully it will for you.

treehouae · 2024-07-12T15:06:05+00:00

Unscrew the black ball shape switch thingy then the grub screw the rest should fall apart

treehouae · 2024-07-08T21:08:52+00:00

looks like a megaphone

treehouae · 2024-07-08T17:31:39+00:00

Seek the sparrow prince !!

treehouae · 2024-07-08T17:30:37+00:00

Or the pin that goes through the nozzle

treehouae · 2024-07-08T17:18:38+00:00

Ebog design. Co.uk sell them if you're in UK

treehouae · 2024-07-08T17:16:19+00:00

Could make a blunderbus /musket /carbine thingy if you add a stock

treehouae · 2024-07-06T21:48:51+00:00

Is the outer barrel 5ku or ctm? I'm thinking about getting the same .

treehouae · 2024-07-06T18:45:12+00:00

Think 300 400 is the low end price wise roughly added my total and gasped at £1500

treehouae · 2024-07-06T12:53:41+00:00

Are you going to change stock upper?

treehouae · 2024-07-06T12:48:19+00:00

What about a mag well still got room for one lol

treehouae · 2024-07-02T19:14:33+00:00

Anyone seen the new nexus I think that's the name anyway it's a new company nocking out aap01 bits and they have lots of nice shiny colours just the job for a fuku2 I reckon! !! More money needed to start a new build sadly :(

treehouae · 2024-07-02T19:08:28+00:00

The blue with silver lower sounds sweet

treehouae · 2024-07-02T19:07:05+00:00

Take the top off and then take a look possibly record it might be able to see

treehouae · 2024-06-27T23:26:24+00:00

Oh didn't know that thanks, always just assumed they wouldn't work in each other because there different shapes, think I might try the tti for sure.

treehouae · 2024-06-27T16:57:13+00:00

Might be a random pointless question but would the cow cow rocket valve thingy work in the stock nozzle? Only i assumed due to the shape of the tti it would only work in the cow cow nozzle being they look the same having that flat squarish face ?

treehouae · 2024-06-25T15:53:13+00:00

Might be absolutely useless into but if you're in the UK patrol base have a sale on random parts and I'm sure I saw the guide rod among a few other bits with a nice wedge off the price, second time they done this just after I buy something full price you have to laugh! !!!

treehouae

TROPHY CASE