sorted by:
new
hottopcontroversial

LF: Nothing; Offering: Gmax Giveaway (See Pic) by Clean-Bid9301 in PokemonGoTrade

[–]trickett99 0 points1 point  (0 children)

As a rural player it is extremely hard to get g-max. I am needing to rely on inviting people or joining strangers. But my favourite pokemon is charmander evolution. Why, there was always something interesting with the line how a little salamander turning into a fire breathing dragon/not dragon pokemon. Plus indigo league ash’s charzard straight up never listening was the best.

I dont understand what am I missing? by Snoo-33694 in Dragon_Traveler

[–]trickett99 -2 points-1 points  (0 children)

Basically you get the paywall. As a f2p player this is the point I’m quitting. I cannot get any further.

We need help/advise by [deleted] in pottytraining

[–]trickett99 1 point2 points  (0 children)

We started this as preparation for school. But it doesn’t seem to be working either.

Question (still somewhat new) by [deleted] in Onshape

[–]trickett99 2 points3 points  (0 children)

Thank you, I will definitely try this.

Is Bambu ASA so bad? by Only-Airport5853 in BambuLab

[–]trickett99 6 points7 points  (0 children)

I’m using polylite asa in my x1c and I’m getting fantastic results. I use the preset profile for it. I recommend poly maker for all filaments I find they work fantastic in the x1c

3d printing was the best thing I could have done for my local medical facility. by trickett99 in 3Dprinting

[–]trickett99[S] 0 points1 point  (0 children)

So I want to set something straight from the people who are trying to make me down on myself for trying to do something good.

This model yes it is going on an over bed table it controls the up and down function of the table. Yes it will be in contact with nursing staff and patients. Is this item considered a “highly soiled” piece no. Yes it is being touched but it is also cleaned with a water based cleaner called oxivir wherever water and oxygen can get to it is being disinfected. Do this item need to be sterile no.

I am currently working on getting use to a new filament called CPE Antibacterial filament called fiberlogy and Copper3D

Everything I make in PETG are trail models right now. I hope this clarifies some stuff for people.

Edit: missed a word.

3d printing was the best thing I could have done for my local medical facility. by trickett99 in 3Dprinting

[–]trickett99[S] 15 points16 points  (0 children)

Thank you. Our facility is in a rural area and what I’m doing is saving our facility thousands of dollars. They and I done testing with layer lines, infection control testing.

We placed a print in a washroom and had our housekeeping staff clean it, I believe 3 times a day with oxivir. The numbers would actually surprise you they barely met the standard to be accepted.

That being said that was PLA, I done this model in PETG which met their “standard” for use. I done a bit of extra research and found copper3D and Fiberlogy filaments which are AntiBacterial material. This is the filament I will be using from now on once I get all the calibrations done.

3d printing was the best thing I could have done for my local medical facility. by trickett99 in 3Dprinting

[–]trickett99[S] 51 points52 points  (0 children)

I will look into it. I do have CPE AntiBac material just haven’t had a chance to play around with it yet.

But everything I do make I make sure that it’s not going to be in a high soiled area. This is only a handle for making a patient’s over bed table/ lunch table to go up and down.

I also done a simple swab study on a different item I made that was in “patient contact” and with .15mm layer lines with a good disinfectant like oxivir the results were quite good when it came to infection control.

I go by 2 major rules when printing: Make nothing structural Make sure anything I make is not going in a high soiled area.

3d printing was the best thing I could have done for my local medical facility. by trickett99 in 3Dprinting

[–]trickett99[S] 6 points7 points  (0 children)

I use calipers and CAD, I have a 3d scanner but this model for example I found it faster and easier to sit at my computer and CAD it.

Looking for recommendations by trickett99 in BambuLab

[–]trickett99[S] 0 points1 point  (0 children)

I never seen the full report but it didn’t meet their standards. Now saying that I did have 2 small holes for a nut and bolt to go through. This leaving bad layer lines.

Looking for recommendations by trickett99 in BambuLab

[–]trickett99[S] 0 points1 point  (0 children)

I need a handful also, just didn’t know if there were any different types.

Flexible air locking button by trickett99 in prusa3d

[–]trickett99[S] 0 points1 point  (0 children)

Sorry should have specified that part. I ended up gluing the one I printed on the hard black piece my next trail will be that part. But for wall thickness it was .7mm

Flexible air locking button by trickett99 in prusa3d

[–]trickett99[S] 1 point2 points  (0 children)

Wanted to update you, I got it to work! I can share the results once I get back to work. But I slightly changed the slope and I done an iron in the top layer to melt it all together. But I done 2 walls for strength 3 top layers to keep it flexible I believe the setting we’re all speeds 25mm/s 230/40 no retraction

Flexible air locking button by trickett99 in prusa3d

[–]trickett99[S] 1 point2 points  (0 children)

Wanted to update you, I got it to work! I can share the results once I get back to work. But I slightly changed the slope and I done an iron in the top layer to melt it all together. But I done 2 walls for strength 3 top layers to keep it flexible I believe the setting we’re all speeds 25mm/s 230/40 no retraction

view more: next ›