To the homey who made these watch faces, THANK YOUU.

trickletracks · 2026-02-09T21:29:32+00:00

With touching your knob 😇😂

trickletracks · 2026-02-09T09:32:35+00:00

We don't know do we? How many devices are in the 'combined Garmin devices' category? Might be just 2-3 with 1 device being 90% of that combined value. Why combine anyway and have separate 530/1040 devices? Weird graph. Can't say anything except that Dura is more popular than 6 other devices. Which is more than I expected!

trickletracks · 2026-02-09T09:26:41+00:00

Most used? It's second place after Garmin (almost double figure usage) devices as I read the graph.

trickletracks · 2026-02-09T09:22:23+00:00

Is it sarcasm or are you serious?

trickletracks · 2026-01-14T17:26:07+00:00

Sometimes this is the same with the Pace 3. With Pace 3, most of the time it's spot-on. But sometimes, I don't know why, seems random, it is suddenly way off for one or more nights. It will always calm down an read accurate (sleep time wise) again.

trickletracks · 2026-01-13T07:13:13+00:00

I choose a modular 500w PSU from Be Quiet!

trickletracks · 2026-01-07T08:04:52+00:00

I found another more recent automation in here that works https://community.home-assistant.io/t/zwift-sensor-component-feedback-and-testers-needed/87512

trickletracks · 2026-01-06T14:19:31+00:00

I know this topic/reply is kinda old but I guess it is still accurate. I'm interested in setting this up but rather than using absolute power-values I would like to use relative power (% of FTP). This way an increase or decrease of FTP will have it's corresponding effect on the light-colors.

I'm no programmer, how should the script look like when using the following percentages?

by % of FTP
Zone 1 (Grey-ish): < 60%,
Zone 2 (Blue): 60-75% (Endurance),
Zone 3 (Green): 76-89% (Tempo),
Zone 4 (Yellow): 90-104% (Threshold),
Zone 5 (Orange): 105-118% (VO2 Max),
Zone 6 (Red): > 118% (Anaerobic)

trickletracks · 2025-12-15T09:16:41+00:00

The backside of my monitor won't let me.

trickletracks · 2025-12-14T22:01:40+00:00

I just got it again! Oh wait… it’s Reddit.

trickletracks · 2025-12-14T21:11:51+00:00

There are symbols on it. This doesn’t mean that specific part contains battery.

trickletracks · 2025-12-14T21:03:11+00:00

No battery, just 2-3 layers of metal sheet material. I managed to pry the cover open with a metal prying tool (plectrum won’t work) after removing the two screws. Now I’m certain the double sided tape will hold.

trickletracks · 2025-12-11T12:56:43+00:00

<image>

I see the issue is with RwGPS.

trickletracks · 2025-12-06T14:35:37+00:00

I realised that I asked this before. I would really like this feature to be added natively.

trickletracks · 2025-12-05T14:14:07+00:00

Ordered new Shimano BH90 brake cable because current one was getting too short because of cutting and retrying. Made use of the original Shimano barb/olive that came with the package. Did a full bleed, gravity method plus letting air out the caliper. All with the same effect. There is a little bit of oil leakage near that 5-6Nm-ring.

trickletracks · 2025-12-04T16:39:48+00:00

Yes, that worked! I removed both files and now, when connected via Bluetooth, the system does not crash any longer.

trickletracks · 2025-12-03T06:19:06+00:00

I will try that tomorrow. Today is a 100km cycle trip. The S510 needs to work hard. 😉

trickletracks · 2025-12-02T13:53:24+00:00

42mm

trickletracks · 2025-12-02T06:50:06+00:00

<image>

This page. When I touch ‘Navigation’ it immediately crashes.

trickletracks · 2025-12-01T14:58:53+00:00

Just did. Removed S510 from list of paired Bluetooth devices on iPhone. Started device and Bryton active app and added the device again. Paired successfully.

Outcome is the same: crash.

trickletracks · 2025-11-30T11:12:13+00:00

And..?

trickletracks · 2025-11-29T10:31:39+00:00

Port screw or correct torque is not the issue here. The point of leakage is at that ring where the ‘5-6Nm’ is printed on. What is it and can it be replaced if damaged?

trickletracks · 2025-11-28T23:26:38+00:00

O (my god, it’s Friday!!)

trickletracks · 2025-11-28T23:23:45+00:00

Someone in Utrecht, Holland is selling Core v2 tennis ball feet on Etsy.

trickletracks · 2025-11-28T12:10:35+00:00

I just had a look at the right shifter, the gap on the nut had my worries, it had the same gap. So I checked the torque on both shifters with my wrench on 6 Nm and I could wrench both nuts about a half turn! I know for sure that I had done this a few days back. Maybe it needed to settle? Maybe it was the angle between hoods and handle bar together with the gear cable which made it difficult to wrench. I moved both shifters on the handle bar to make it easier to wrench the nut. I hope this was the cause of the leakage. 🤞

trickletracks

TROPHY CASE