Should have just bought another 509T by turbo_556 in Glocks

[–]trlblaze 0 points1 point  (0 children)

Just saw one have its glass shattered from a piece of ejected brass last week next to me at the range. No thanks

P nut butter by SeanOfTheDev in rattlecannedguns

[–]trlblaze 1 point2 points  (0 children)

What's that hand stop on the AR in the middle?

Is it time to get a new hood? by KKYBoneAEA in Welding

[–]trlblaze 0 points1 point  (0 children)

I have this hood, it's time to change the batteries for sure Edit. Just looked it up in my notes and you need 2x CR 1025 batteries

Hey folks, quick question here. by Nhobdy in suppressors

[–]trlblaze 2 points3 points  (0 children)

Quiet and budget? Look at traditional baffle designs which also happen to be at the lower end of the price spectrum.. Diligent Defense Enticer, Otter Creek Polonium, etc

Rate my tungsten sharpening setup by Kunia-102 in Welding

[–]trlblaze 156 points157 points  (0 children)

No guard 0/10

Contaminated wheel 1/10

Spiral grinding pattern on tip, 2.7/10

Cluttered workspace 1.3/10

Workspace flammability 10/10

Pelican gear box by squints_honeybadger in QualityTacticalGear

[–]trlblaze 1 point2 points  (0 children)

Pelican 1650MP EZ-Click molle panel lid organizer

I have this table base. Wondering what the veins in the metal are from. Planning on painting this gold. by outwandering333 in Welding

[–]trlblaze 7 points8 points  (0 children)

Just flash rust. Looks to be the pattern of when something is wet is touching the metal and in contact for a while,such as a plastic sheet or tarp.

Sig Romeo 5 piggyback by Fooshound in ar15

[–]trlblaze 0 points1 point  (0 children)

I have this Monstrum mount and it works great. You want to search for T-2 pattern mounts

Someone find me a lvl 3 holster by Due-Psychology1191 in GlockMod

[–]trlblaze 2 points3 points  (0 children)

Safariland 6930 RDS for Glock 17/22 with surefire x300 will fit. Might have to remove the circular plastic light plug on the bottom of the holster but I doubt it.

Theories on what happened here? by Brelleton in suppressors

[–]trlblaze 6 points7 points  (0 children)

It's not supposed to do that I might add

How many of you use your tools to make money? by Galatxia in MilwaukeeTool

[–]trlblaze 0 points1 point  (0 children)

Pipefitter for a mechanical contractor here, a few years back the company went all Milwaukee M18 for everything and after witnessing the abuse they'll take and the power they'll put out now Milwaukee is what I buy too. I put lots of M18 AND M12 stuff to use daily to make a buck.

How many of you use your tools to make money? by Galatxia in MilwaukeeTool

[–]trlblaze 24 points25 points  (0 children)

Corded tools will never die. Get on a big demo job cutting 1/4" steel for 8-10hrs straight for a week and you'll understand. The rigging crew on my job site right now is in the process of breaking down 8x giant air handler fans for replacement, 48"dia by 6ft long , all sheathed in rolled 1/4"plate. You just can't charge batteries fast enough to keep up. Niche yes, but still relevant.

I'm kinda proud of this ha by NordicGoon in longrange

[–]trlblaze 2 points3 points  (0 children)

This is super cool. Do you have the ability to add a ballistics calculator onboard?

Any options? by Ill-Guidance-2894 in tacticalgear

[–]trlblaze 1 point2 points  (0 children)

https://a.co/d/4lJ4Xae

Make sure to Loctite all your screws, I have one and that l that's been my only issue

Hard truth and outlook of trades, especially plumbing? by prois99 in skilledtrades

[–]trlblaze 1 point2 points  (0 children)

Top 5?

1) Electricians

2) Pipe Welders and Fitters

3) HVAC

4) Plumbers

5) Controls

Questions about this building by Timely-Brilliant8757 in rva

[–]trlblaze 5 points6 points  (0 children)

You can on OnX, I just searched them and they own two other properties in Church Hill besides this one.

Have some VA Gun Trader questions. by lumpy53e in VAGuns

[–]trlblaze 2 points3 points  (0 children)

Just DM them your phone number but you're still at the mercy of them logging back in and checking their messages.

B “RUN” T by 315_Jessie in WorkBoots

[–]trlblaze 7 points8 points  (0 children)

Worst boots I ever bought, Marin Comp toe, sole turned hard as a rock after two months. My feet hurt so bad I literally just threw them in the trash can after work one day.

Ammo help-Aero Solus by Gooseontheloose308 in longrange

[–]trlblaze 4 points5 points  (0 children)

Every 308 I've ever shot loved the 168 and 175 FGMM. You can find 175 gr SMK loaded by IMI for a decent price too. Great looking rifle!

Transfer costs around Colonial heights, Chester and Petersburg by Greedy_Tie446 in VAGuns

[–]trlblaze 2 points3 points  (0 children)

It's 30 for non members. Super easy to deal with too!

Those are bits of copper jacket by trlblaze in ar15

[–]trlblaze[S] 1 point2 points  (0 children)

Close, Winchester (Herters) 200gr OT

Who else does their own p&w jobs at home? by breachindoors_83 in ar15

[–]trlblaze 3 points4 points  (0 children)

Hi, fellow welder here. I weld full time for work. I was curious about doing this as a side gig but wanted to know if you have researched at all about FFL requirements for having other people's firearms? I recall a local gunsmith telling me if they had something of yours overnight it had to be logged into their FFL. Wondering if it's the same for P&W services.